• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.1
• /
• pp.22-28
• /
• 2016

It is necessary to store and supply hydrogen isotopes for Tokamak operation. A storage and delivery system (SDS) is used for storing hydrogen isotopes as a metal hydride form. We designed and fabricated a depleted uranium (DU) bed to store hydrogen isotopes. The rapid storage of hydrogen isotopes is very important not only for safety reasons but also for the economic design and operation of the SDS. The delivery rate at the desorption temperatures without the operation of a dry pump was analyzed in comparison with that with the operation of the dry pump. The effect of the initial desorption temperatures on the dehydriding of the DU without the operation of the dry pump was measured. The effect of the initial desorption temperatures on the dehydriding of DU with the operation of the dry pump was also measured and analyzed. The primary pressure on the desorption temperatures without the operation of the dry pump was analyzed in comparison with that with the operation of the dry pump. The temperature gradient of the coil heater and the primary vessel was also analyzed. Our results will be used to develop pilot scale hydrogen isotope processes. It was confirmed that dehydriding of a medium-scale DU bed has enabled without the operation of the dry pump.

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.711-723
• /
• 2000

Existing equations of bed load transport have large variations in their forms and adopt different variables so that it is very difficult to understand the characteristics of each equation. Different sets of measurement data have been employed for the development of various equations, and the comparison between them is completely dependent on the choice of the data for the verification. Several equations seem to have some defects in their basic assumptions. Various non-dimensional physical numbers directly associated with the mechanism of bed load transport are related with each other, and one of them is chosen for the unification of the form. Good ideas introduced in a certain equation are employed for the refinement of other equations. Then optimum values of empirical parameters have been determined by using the data collected by Brownlie(1981) and a new bed load equation has been developed, which is considered widely valid and relatively very accurate.curate.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.232-237
• /
• 1989

The elution mechanism of rare earth elements in cation exchange resin which was substituted with $NH_4^+,\;Zn^{2+}\;or\;Al^{3+}$ as a retaining ion had been investigated. Rare earths or rare earths-EDTA complex solution was loaded on the top of resin bed and eluted with 0.0269M EDTA solution. When the rare earth-EDTA complex was adsorbed on the $Zn^{2+}\;or\;Al^{3+}$ resin form, retaining ion was complexed with EDTA and liberated rare earths was adsorbed in the resin again. Adsorbed rare earths in resin phase could be eluted by the complexation reaction with EDTA eluent. On $NH_4^+$ resin form, the rare earth-EDTA complex which had negative charge could not adsorbed on the cation exchange resin because the complexation reaction between $NH_4^+$ and EDTA was impossible. So the elution time was much shorter than in $Zn^{2+}\;or\;Al^{3+}$ resin form. When the rare earths solution was loaded on the $Zn^{2+},\;Al^{3+}$ resin form bed, rare earths was adsorbed in the resin and the retaining ion was liberated. Adsorbed rare earths in resin bed was exchanged by EDTA eluent forming rare earths-EDTA complex, and eluted through these processes. On $NH_4^+$ resin form, rare earths loaded was adsorbed by exchange reaction with $NH_4^+$. As the EDTA eluent was added, rare earths was liberated from resin forming negatively charged rare earth-EDTA complex and eluted without any exchange reaction. So the elution time was greatly shortened and there was no metallic ion except rare earths in effluent. When the $Zn^{2+}\;and\;Al^{3+}$ was used as retaining ion, the pH of efflent was decreased seriousely because the $H^+$ liberated from EDTA molecule.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.375-377
• /
• 2005

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.599-604
• /
• 2021

In an era where AI artificial intelligence converges into each field, design of AI-CARE function and UI UX design are in the spotlight. The application of shape design and the trend of color are important for visual effects to match new features. In this paper, we would like to use this to present an example of the arrangement and application of form trends and to present design directions. In the introduction, the latest design environmental factors were analyzed and studied in the direction of the new proposal. In the text, the design direction and consideration of the design in the planning were studied by separating the functional design form, and the direction of the design work was presented. At the stage of form and color, a plan was proposed to match the flow of minimalism, universal design, and affordance design. A study method based on case practice is a consideration of how to consider content on shapes and colors specialized in the partial design work, and proposed to enable graphic production of new areas of UI UX in content images to be feasible. Through this study, the design direction and planning of the derivative method of shape and color was reached by suggesting design directionality and validity for each AI CARE bed PART.

• Korean Journal of Ecology and Environment
• /
• v.35 no.2 s.98
• /
• pp.103-110
• /
• 2002

Seasonal changes of the phytoplankton community was investigated from July 2000 to April 2001 at the river bed lake, Jangjwa Lake in the Imjin River, which appeared to be the most natural condition. A total of phytoplankton were composed of 112 taxa, belonging to 5 divisions,83 species, 10 varieties,1 variety-form, 1 form and 17 unidentified species. Of those, the green algae and the diatoms were present during the investigation periods more frequently then the other taxa. The phytoplantton standing crops varied from $2,943{\times}10^3\;cells/l$ on April 2001 to $5,742{\times}10^3\;cells/l$ on January 2001. The phytoplankton standing crops had a continuous high value over $3,000{\times}10^3\;cells/l$ during the investigated periods and showed the highest value during winter period. The major dominant species were Aulacoseira granulata, Chlamydomonas nivalis v. kobayasii, Dinobryon sertularia, Mougeotia so. and Uroglenopsis americana. Among those, Chlamydomonas nivalis v. kobayasii was a major dominant species during winter period.

• Journal of Korea Water Resources Association
• /
• v.45 no.9
• /
• pp.853-860
• /
• 2012

It is well-known that loop effect of the stage-discharge relationship is formulated based on many field observations especially for the sand rivers. Theoretical understandings of the loop effect for the sand rivers have been widely provided, based on the facts that it is driven by the flood wave propagation and bed form changes over the given flood period. However, very few theoretical studies or field observations associated with loop-rating curves in the gravel or rock-bed mountain streams have been attempted so far, due particularly to the difficulties in the accurate discharge measurement during the flood in such field conditions. The present paper aims to report a unique loop-rating curve measured at a gravel and rock-bed mountain stream based on the flood discharge observation acquired during the typhoon, Muifa that passed nearby Jeju Island in summer of 2011. As velocity instrumentation, a non-intrusive Surface Velocity Doppler Radar to be suitable for the flood discharge measurement was utilized, and discharges were consecutively measured for every hour. Interestingly, the authors found that the hysteresis of the loop-rating curve was adverse compared to the typical trend of the sand bed streams, which means that the discharge of the rising limb is smaller than the falling limb at the same stage. We carefully speculate that the adverse trend of the loop-rating curve in the gravel bed was caused by the bed resistance change that works differently from the sand bed case.

• Tribology and Lubricants
• /
• v.33 no.5
• /
• pp.214-219
• /
• 2017

Abrasive fluidized bed machining (AFBM) is similar to general abrasive fluidized machining (AFM) in that it can perform polishing of the outer and inner surfaces of a 3-dimensional shape by the flow of particles. However, in the case of AFM, the shear force generated by the flow of the particles causes material removal, while in AFBM, the abrasive particles are suspended in the chamber to form a bed. AFBM can be used for deburring, polishing, edge contouring, shot peening, and cleaning of mechanical parts. Most studies on AFBM are limited to metals, and research on application of AFBM to plastic materials has not been performed yet. Therefore, in this study, we investigate the effect of rotating speed of the specimen and the air flow rate on the material removal characteristics during AFBM of polyacetal with a horizontal AFBM machine. The material removal rate (MRR) increases linearly with increase of the rotating speed of the main shaft because of the shear force between the particles of the fluidized bed and the rotation of the workpiece. The reduction in surface roughness tends to increase as the rotating speed of the main shaft increases. As the air flow rate increases, the MRR tends to decrease. At a flow rate of 70 L/min or more, the MRR remains almost constant. The reduction of the surface roughness of the specimen is found to decrease with increasing air flow rate.

• Journal of the Korean Society of Combustion
• /
• v.16 no.4
• /
• pp.23-30
• /
• 2011

In the iron and steel manufacturing, sintering process precedes blast furnace to prepare feed materials by agglomerating powdered iron ore to form larger particles. There are several techniques which have devised to improve sintering production and productivity including flue gas recirculation(FGR) and additive gas enriched operation. The application of those techniques incurs variations of process configurations as well as inlet and outlet gas conditions such as temperature, composition, and flow rate which exert direct influence on reactions in the bed or the operation of the entire plant. In this study, an approach of sintering bed modeling using flowsheet process simulator was devised in consideration of FGR and the change of incoming and outgoing gas conditions. Results of modeling for both normal and FGR sintering process were compared in terms of outgoing gas temperature, concentration, and moisture distribution pattern as well as incoming gas conditions. It is expected to expand the model for various process configurations with FGR, which may provide the usefulness for design and operation of sintering plant with FGR.

• Archives of Plastic Surgery
• /
• v.34 no.3
• /
• pp.377-382
• /
• 2007

Purpose: Hook nail deformity is caused by inadequately supported nail bed due to loss of distal phalanx or lack of soft tissue, resulting in a claw-like nail form. A composite graft from the foot bencath the nail bed gives adequate restoration of tip pulp. Methods: From September of 1999 to March of 2004, six patients were treated for hook nail deformity and monitored for long term follow up. Donor sites were the lateral side of the big toe or instep area of the foot. We examined cosmetic appearance and nail hooking and sensory test. The curved nail was measured by the picture of before and after surgery. Results: In all cases, composite grafts were well taken, and hook nail deformities were corrected. The curved nail of the 4 patients after surgery were improved to average $28.7^{\circ}$ from average $55.2^{\circ}$ before surgery. The static two point discrimination average was 6.5mm and the moving two point discrimination average was 5.8mm in the sensory test. Conclusion: Composite graft taken from foot supports the nail bed with the tissue closely resembling the fingertip tissue, making it possible for anatomical and histological rebuilding of fingertip.