• 제목/요약/키워드: bearing system

검색결과 2,226건 처리시간 0.033초

100㎛급 글라스 버블 혼입 시멘트계 초경량 무기 단열재의 단열 및 난연특성 (Thermal Insulation and Flame Retardant Properties of Cement Based Super Light-weight Inorganic Thermal Insulation using 100㎛ Grade Glass Bubble)

  • 손배근;송훈
    • 한국건설순환자원학회논문집
    • /
    • 제9권4호
    • /
    • pp.642-649
    • /
    • 2021
  • 건축물의 에너지 절약기준이 강화되면서 외단열 공법의 적용과 단열재 두께가 증가하고 있다. 유기계 단열재는 시공성, 경제성 등 시공비용 절감 효과와 뛰어난 단열성능을 가지고 있다. 하지만, 유기계 단열재 특성상 열에 매우 취약하므로 화재 발생 시 급격한 화재확산과 유독가스 발생으로 심각한 피해가 발생한다. 무기계 단열재는 기본적으로 불연성능을 가지나 무겁고 유기계 단열재에 비해 단열성능이 떨어진다. 글라스 버블은 소다 라임 보로실리케이트 유리로 밀도가 매우 낮고, 내부가 비어 있는 구형의 입자로 볼베어링 효과로 유동성이 개선된다. 또한, 무기계 단열재에 혼입하여 사용할 경우 밀도와 단열성능이 개선된다. 본 연구는 시멘트계 재료와 글라스 버블을 혼합하여 무기 단열재를 제조하였고 단열, 난연 및 불연성능을 평가하였다. 연구 결과, 글라스 버블의 혼입률이 증가할수록 열린 기공을 형성하고 있으나, 기공 및 셀 벽에 분포됨에 따라 충분한 단열성능을 보인다. 또한, 글라스 버블의 혼입률은 10% 이하로 사용하는 것이 바람직하다.

서울시 강남·강북권 6개구(區) 임야 거래가격과 공시지가 적정성에 영향을 미치는 요인 (Factors Affecting the Appropriateness of Forest Land Transaction Price and Officially Assessed Land Price in Six Districts in Southern and Northern Parts of Han River in Seoul)

  • 김학준;유주연
    • 부동산연구
    • /
    • 제28권4호
    • /
    • pp.63-73
    • /
    • 2018
  • 본 연구의 목적은 임야 거래가격과 공시지가 적정성에 영향을 미치는 주요 요인을 분석하여 현실에 부합하는 공시지가 결정요인 모색 및 감정평가액 결정의 적정성을 도모하는 데 있다. 본 연구는 서울시 강남 강북권 6개구(區)에 소재한 임야 거래가격 적정성 여부를 독립표본 t-검정분석, 로지스틱 회귀분석의 통계적 기법으로 분석하였다. 분석 결과 지역차이와 형상의 정형여부는 적정거래여부와 무관하였고 비오톱 지정여부, 개발제한구역 여부, 고저의 차이, 보전산지 여부, 이용상황의 차이, 방위 및 접면도로의 차이는 임야거래 적정성에 유의미한 영향을 미치는 것으로 분석되었다. 이를 바탕으로 임야 고유의 독특한 가격형성요인을 면밀히 분석하여 공시지가의 조사 평가에 반영하여야 한다는 함의를 지닌다. 국민경제활동과 밀접한 관련이 있는 임야 감정평가는 시장참가인들이 중시하는 임야가격형성요인을 반영할 필요가 있다. 본 연구를 통해 제시된 임야 적정거래 여부와 관련된 변수들은 향후 임야 거래질서정착과 시장 안정화 지표로 적용되기를 기대한다.

가스 포일 베어링으로 지지되는 연료전지 전기자동차용 공기압축기의 회전체동역학적 성능 측정 및 예측 (Rotordynamic Performance Measurements and Predictions of a FCEV Air Compressor Supported on Gas Foil Bearings)

  • 황성호;문창국;김태호;이종성;조경석;하경구;이창하
    • Tribology and Lubricants
    • /
    • 제35권1호
    • /
    • pp.44-51
    • /
    • 2019
  • The paper presents the rotordynamic performance measurements and model predictions of a fuel cell electric vehicle (FCEV) air compressor supported on gas foil bearings (GFBs). The rotor has an impeller on one end and a thrust runner on the other end. The front (impeller side) and rear (thrust side) gas foil journal bearings (GFJBs) are located between the impeller and thrust runner to support the radial loads, and a pair of gas foil thrust bearings are located on both sides of the thrust runner to support the axial loads. The test GFJBs have a partial arc shim foil installed between the top foil and bump strip layers to enhance hydrodynamic pressure generation. During the rotordynamic performance tests, two sets of orthogonally installed eddy-current displacement sensors measure the rotor radial motions at the rotor impeller and thrust ends. A series of speed-up and coast-down tests to 100k rpm demonstrates the dominant synchronous (1X) rotor responses to imbalance masses without noticeable subsynchronous motions, which indicates a rotordynamically stable rotor-GFB system. Finite element analysis of the rotor determines the rotor free-free (bending) natural modes and frequencies well beyond the maximum rotating frequency. The predicted damped natural frequencies and damping ratios of the rotor-GFB system reveal rotordynamic stability over the speeds of interest. The imbalance response predictions show that the predicted critical speeds and rotor amplitudes strongly agree with the test measurements, thus validating the developed rotordynamic model.

거주자 참여형 공동주거의 평면계획에 적용된 가변성의 특성 - 유럽의 거주자 참여형 다층 공동주거를 중심으로 - (The Characteristics of Flexibility applied to Unit Plan of Housing by Residents Participation - focusing on European Multi-story Housing applying Residents Participation -)

  • 김현주
    • 대한건축학회논문집:계획계
    • /
    • 제34권11호
    • /
    • pp.113-123
    • /
    • 2018
  • First of all, the multi-story Housing applying resident's participation in europe was classified by the menu selection method, the two-step supply method and the cooperative method. And then I analyzed flexible unit plan of cases for deriving the planning methode and the characteristics of flexibility. First, I analyzed the area and form of the unit plan, structure and Installation, fixed and variable elements to derive the planning method. The area of units are distributed from a minimum of $35m^2$ to a maximum of $150m^2$, and many of the unit planes have a narrow front and a deep depth. The structure is a long-span wall-structure or a skeleton structure, and is designed without any columns and bearing walls in the interior space for flexibility in spatial composition. The vertical shafts are located in the center of the unit in a box-form or in the corner at the unit dividing wall for free placement of interior wall. Fixed elements are framework and facility systems. Most of the future residents in the two-steps supply method and the cooperative method were able to freely design the internal space within the zoning concept proposed by the architect and change the location of the facade element within module system proposed by the architect. Second, the characteristics of the flexibility applied to the unit plan were divided in integrated flexibility, functional flexibility, construction flexibility, and supply flexibility. The integrated flexibility enables residents to give the variable space combination based on the complex structure of the inner space for providing various living experiences. Regarding functional flexibility, the three-dimensional spatial structure with neutral space has multi-functionality according to the needs of residents and easily accepts mixing of hybrid programs such as work and residence. Constructive flexibility allows residents to create identity by freely planning interior space and changing the size or location of facade components in a determined system of architects. Finally, various types of size and space composition are proposed and realized in the whole building applying menu selection method, so that flexibility in the offer can accommodate and integrate various types of living.

인천항 국제여객부두 관리체계 개선에 관한 연구 (A Study on Improvements of Incheon International Passenger Port Management System)

  • 이경한;이종필;고동훈
    • 한국항만경제학회지
    • /
    • 제37권3호
    • /
    • pp.35-53
    • /
    • 2021
  • 지난 20년 동안 우리나라 국제여객항 카페리의 여객과 화물 운송 실적은 각각 연평균 8.6%의 증가율을 기록하였다. 하지만 항로의 발전과 항차의 양적 증대에 비해 국제여객항의 비효율적인 관리체계에 대한 개선 요구가 끊임없이 제기되어 왔다. 본 논문은 중요도-성취도(IPA) 기법을 응용·적용하여 우리나라의 대표 국제여객항인 인천항을 중심으로 최근 국제여객선 수급상황 변화와 정부·민간 등 이용 주체의 개선 요구를 반영한 여객터미널 관리체계 전반의 개선사항과 추진 방안을 제시하였다. IPA 분석 결과, 인천항 국제여객터미널의 '운영' 부문에서는 세관인력의 확대 및 상시통관 시스템 시행, '시설'에서는 연락교-선석 간 완충시설 설치 및 카페리 화물 전용 배후단지 마련, '제도'의 경우 비용부담 주체의 명확한 기준 설정 및 터미널 이용 관련 비용의 인상폭 제한 등이 관리체계 개선에 가장 필요한 항목으로 나타났다. 본 연구의 결과는 국제여객항의 효율적인 관리체계를 위해 운영, 시설 및 제도 등 다각적 차원에서 이해관계자의 의견을 반영한 정부의 정책 접근과 투자의 필요성을 시사한다.

스마트건설 디지털 다짐정보 구축을 위한 IoT 기반 DCPT 시스템 현장실증 (Feasibility Test with IoT-based DCPT system for Digital Compaction Information of Smart Construction)

  • 김동한;배경호;조진우
    • 한국측량학회지
    • /
    • 제40권5호
    • /
    • pp.421-428
    • /
    • 2022
  • 토공은 건설공사의 시작이며 기초가 되기 때문에 가장 중요한 공정이다. 특히 토공의 다짐측정은 건설공사의 품질과 생산성에 직결되는 중요한 요소이다. 기존 다짐측정은 주로 들밀도 시험, 평판재하시험과 같은 아날로그 방식을 이용하여 수행되었다. 하지만 최근 4차 산업혁명의 고도화에 따라 스마트건설기술이 대두되면서 다짐측정 또한 기존 아날로그 시험의 단점을 보완한 기술에 대한 연구가 활발히 진행되고 있다. DCPT는 기존 시험법과 비교하여 간편하고 속도가 빨라 최근 관심이 증대되고 있지만 데이터를 수기로 측정하는 아날로그 방식으로 이력관리와 데이터 검증 등 여러 단점을 가지고 있다. 본 연구에서 개발한 IoT 기반 DCPT 시스템은 기존 DCPT에 디지털 와이어센서, 모바일 폰, 블루투스를 결합했다. 개발된 장비는 아날로그 DCPT 뿐만 아니라 다른 다짐시험법과 비교하여 빠른 시험시간, 1인 계측, 저비용, 모바일 기반 계측 이력 및 데이터 관리, 실시간 데이터 확인 등의 장점을 갖는 것이 특징이다. 추가로, 개발된 장비의 현장 적용성 검증을 위해 아날로그 DCPT와 함께 테스트베드를 구축하여 검증하였다. 테스트베드는 롤러장비를 통해 실제 토공현장과 유사한 조건으로 구축했다. DCPT 데이터는 322개 측점에서 총 3220개의 데이터를 획득했다. 분석결과로 IoT 기반 DCPT의 성능은 우수한 것으로 나타났으며 개발된 장비를 통해 구축된 테스트베드 또한 다짐이 수행됨에 따라 안정적인 결과를 보이는 것으로 나타났다.

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

생물반응기를 통해 대량증식된 사계성 딸기 '고하' 소식물체의 순화용기에 따른 생육특성과 묘생산 경제성 (Growth Characteristics and Economic Efficiency of Nursery Plants Production According to Transplanting Container for Acclimatization of Mass Propagated Plantlets via Bioreactor Culture of Ever-bearing Strawberry 'Goha')

  • 이종남;김혜진;김기덕;임주성;임학태;용영록
    • 원예과학기술지
    • /
    • 제30권4호
    • /
    • pp.437-441
    • /
    • 2012
  • 본 실험은 생물반응기를 통해 대량증식된 사계성 딸기 조직배양묘의 적정 순화용기를 선발하기 위해 실시하였다. 순화용기는 플라스틱투명용기, 플러그 트레이, I-포트 및 흑색비닐포트 등 4가지를 사용하였다. 토양함수율 10%이상 지속일수는 플라스틱 투명용기가 5일, 흑색비닐포트가 3-4일, 플러그 트레이 2일, I-포트가 1일 순이었다. 생존율은 흑색비닐포트가 80%, 플라스틱투명용기가 70%, I-포트가 55% 및 플러그 트레이가 15% 순으로 나타났다. 또한 생육량은 플라스틱 투명용기가 가장 왕성하였고, 흑색비닐포트와 플러그 트레이는 비슷하였으며, I-포트가 가장 저조하였다. 런너 발생은 흑색비닐포트가 주당 3.3개로 가장 많았으며, 플라스틱투명용기가 2.9개, 플러그 트레이가 1.6개 및 I-포트가 1.2개 순으로 나타났다. 총 생산비용은 흑색비닐포트가 44,405,300원/10a로 I-포트의 51,064,700원/10a보다 6,659,400원/10a이 더 절감되었으며, 총 생산주수도 흑색비닐포트가 102,718주/10a로 I-포트의 72,452.9주/10a보다 30,265.1주/10a 더 생산되었다. 또한 주당 생산비용은 흑색비닐포트가 432.3원으로 I-포트의 704.8원에 비해 272.5원의 감소하였다. 따라서 생물반응기를 통해 대량증식된 사계성 딸기 조직배양묘의 순화용기는 흑색비닐포트가 적당하였다.

The Trend of Cigarette Design and Tobacco Flavor System Development

  • Wu, Jimmy Z.
    • 한국연초학회지
    • /
    • 제24권1호
    • /
    • pp.67-73
    • /
    • 2002
  • In light of addressing consumer health concern, coping with anti-tobacco movement, and promoting new product, tobacco industry is actively pursuing to make a new generation of cigarettes with low tar and nicotine deliveries, and less harmful substances. Low tar and low nicotine cigarettes increases their market shares dramatically world wide, especially in KT&G, multinational tobacco companies, EU countries, even in China regulated by CNTC to set up yearly target to lower tar and nicotine deliveries. On the other hand, to design a new cigarette with reduced harmful substances begins to gain speed. The "modified Hoffmann list" publishes thirty plus substances in tobacco leaf and main smoke stream, which is the prime suspect causing health problems. Various ways and means are developed to reduce such components including new tobacco breeds, new curing method, tobacco leaf treatment before processing, selected filtration system, innovated casing system to reduce free radicals, as well as some non conventional cigarette products. In TSRC held this year, the main topic is related to reduce tobacco specific nitrosamines in tobacco leaf. The new generation of cigarette is in the horizon. It still needs a lot help to produce commercial products with satisfied taste and aroma characters. The flavor industry is not regulated by many governments demanding which ingredients might or might not be for tobacco use. However, most of the cigarette companies self impose a list of ingredients to guide flavor suppliers to design flavors. Unfortunately, the number of ingredients in those lists is getting shorter every year. It is understandable that the health is not the only reason. Some cigarette companies are playing safe to protect the company from potential lawsuit, while others are just copying from their competitors. Moreover, it is obvious that it needs more assistance from casings and flavors to design new generation of cigarettes with missing certain flavor components in tobacco leaf and main smoke stream. These flavor components are either non-existed or at lower level at new form of cured tobacco leaf or filtered in the main smoke stream along with reduced harmful substances. The use of carbon filters and other selected filtration system poses another tough task for flavor system design. Specific flavor components are missing from the smoke analysis data, which brings a notion of "carbon taste" and "dryness" of mouth feel. It is ever more demanded by cigarette industry to flavor suppliers to produce flavors as body enhancer, tobacco notes, salivating agents, harshness reducer, and various of aromatic notes provided they are safe to use. Another trend is that water based flavor or flavor with reduced ethanol as solvent is gaining popularity. It is preferred by some cigarette companies that the flavor is compounded with all natural ingredients or all ingredients should he GMO free. The new generation of cigarettes demands many ways of new thinking process. It is also vital for tobacco industry. It reflects the real needs for the consumers that the cigarette product should be safe to use as well as bearing the taste and aroma characters smokers always enjoyed. An effective tobacco flavor system is definitely a part of the equation. The global trend of tobacco industry is like trends of any other industries lead by consumer needs, benefited with new technology availability, affected by the global economy, and subjected for various rules and regulations. Anti-tobacco organizations and media exceptionally scrutinize cigarette, as a legal commercial product. Cigarette is probably the most studied commercial product for its composition, structure, deliveries, effects, as well as its new developmental trend. Therefore, any new trend of cigarette development would be within these boundaries. This paper is trying to point out what it would be like for tobacco industry in the next few yews and what concerns the tobacco industry. It focuses mostly on the efforts to produce safer cigarettes. It is such a vital task for the tobacco industry and its affiliate industries such as cigarette papers, filters, flavors, and other materials. The facts and knowledge presented in this paper might be well known for the public. Some of the comments and predictions are very much personal opinion for a further discussion.

수술중 방사선치료를 위한 조립형 조사기구의 제작과 선량 분포 (Design and Dose Distribution of Docking Applicator for an Intraoperative Radiation Therapy)

  • 추성실;김귀언;노준규
    • Radiation Oncology Journal
    • /
    • 제9권1호
    • /
    • pp.123-130
    • /
    • 1991
  • 수술중 방사선치료법 (Intraoperative Radiation Therapy)은 외과적으로 개복된 상태에서 종양이나 장기를 절제한후 비가시적 또한 육안적 암세포를 전자선등으로 직접 조사 치료하는 방법으로서 일시에 다량의 방사선량을종양부위에 집중적으로 조사할 수 있으며 정상장기나 조직을 방사선 조사 범위로부터 차단함으로 방사선 손상을 격감 시킬 수 있는 장점을 갖고 있다. 본 연세암쎈터 치료방사선과에서는 1986년 2월부터 현재까지 십여명의 위암환자를 대상으로 수술중 방사선치료를 시 행하여 좋은 결과를 얻었으나 치료절차상 많은 어려운점 이 야기되어왔다. 그중에서도 방사선치료실(LINAC room)내에서 수술을 시행함에 따른 수술기구, 응급처치 장치, 조명 및 감시장치 등이 완벽하게 준비되여져 야 하며 치료실내를 $2\sim3$일 동안 자외선과 소독약으로 완전히 제독 하여야 함으로 그기간동안 많은 방사선치료 환자들이 한명의 IORT환자를 위하여 치료를 중단하여 야 하는 어려움이 있었다. 본 연세 암쎈터에서는 콜리메터 접속기구(collimator holder)와 투명 조사통(Acrylic cone)으로 구성된 조립형 조사기구(Docking Applicator)를 고안 제작하여 수술과 방사선 치료를 각각 해당 장소에서 시 행할 수 있었다. 즉 tORT 환자의 개복수술은 수술실에서 시 행하되 다만 가볍고 투명하며 외부 공기와 차단된 투명 조사기구(Acrylic cone)를 종양 부위에 조준고정 시켜 봉합하고 방사선 치료실로 이송된후 선형가속기의 방사구에 장착된 콜리메터 접속기와 접합시킴으로서 많은 문제점을 해결할 수 있었다. 조립조사 기구는 치료부위를 잘 관찰할 수 있고 쉽게 결합할 수 있도록 가벼운 아크릴과 Mylafilm으로 구성 제작하였으며 콜리메터 접속기는 종양 부위에 균일한 선량분포와 누출선량을 줄이기 위하여 스텐레스 강철로 구성제작하였다. 직경이 8cm이고 길이가 30cm인 접합형 조사기구를 사용하여 12MeV 전자선을 조사하였을때 $90\%$의 등선량곡선이 5 mm 정도 확장 되었으며 조사통 가장자리의 선량이 약 $6\%$ 증가하였다. 조사 통밖 의 누출 선량은 위치에 따라 출력선량의 $3\sim5\%$가 측정되었고 심부 백분율은 기준조사통에 의한 것과 유사하였다. 조사통의 모양과 크기는 종양범위에 알맞도록 원형, 사각형 또는 오각형 등으로 제작하였으며 $1\sim2$ cm의 금속띠를 이용 조절하므로서 최적한 선량분포를 얻을수 있었고 콜리메터의 차폐 금속편을 이용하여 조사통밖의 누출선량을 최대한으로 줄일 수 있었다.

  • PDF