• 한국지반공학회지:지반
• /
• 제1권2호
• /
• pp.17-26
• /
• 1985

본문의 필자들은 연약지반의 다차원감밀을 포함하여 각종 개양공법을 시행할 경추 재하에 의한 웅전의 관력과 변형 그리고 문극수감거동 등의 해석과 나아가 시공관리 등을 포괄하는 연약지반해 석연의 다목적 프로그램의 개발을 목표로 연구를 진행중에 있다. 1)-4) 그동안 몇차례에 걸헉 본프로 그램의 이론적 배경과 구성내용 그리고 개양공법별 유용성데 관하여 학술지나 학술발표회를 통해 발 표한 바 있는데 본문은 이어서 Sand Drain공법의 적용에 대하여 연구한 결과를 발표한 것이다. Sand Drain공법은 점토우에 사완을 두어 성토하중에 의해 여밀을 촉진한다. 이 설계이론은 주지하다시피 Barron의 이론을 이용한 것인데 그러나 이 이론은 Terzaghi계 이론의 결함과 변형경건이 불분명하다는 것은 잘알혀진 사실이다. 그리고 사항데 대한 응력집중은 전혀 고려되어 있지 않다. 본 프로그램은 기본적으조 다차원려밀은 Biot계리론을 채택하였다. 이 다차원견밀을 해석하는테 사항의 응력집중을 해명하기 위하여 사항i61 강성을 고쳐하지 않은 경우와 고려하는 경우를 자연지반 상태의 탄밀(이차원)상태와 비교하여 응력집중이 어떻게 일어나는7'1를 고찰하였다. 이 때 모래(사항)와 성토재료는 비선형탄성모델로 생각하고 점토는 비등방성에 Creep효과를 함께 고려할 수 있는 구성방정식으로서 탄점소성모델을 채택하였다. 그 결과는 강성을 고려하는 Sand drain이 헌실적이며 동시에 그와같은 해석이나 설계도 가능하다는 것을 밟힌 것이다.

• 대한한의학회지
• /
• 제25권4호
• /
• pp.43-50
• /
• 2004

Objective : Obesity is associated with degenerative arthropathy giving stress on joints. It also amplifies loads of weight bearing joints by changing the gravity line of the body. Our aim is to investigate the correlation between obesity and lumbar lordosis in obese pre-menopausal Korean females. The hypothesis was tested that there is a correlation between obesity and lumbar lordosis. Methods : A cross-sectional evaluation of 44 Females (baseline age 30.77 ± 6.46) with BMI 31.53 ± 3.82 (kg/㎡) was done. Body composition was measured using bio-impedance analysis (BIA), and anthropometry was done by the same observer. A lateral whole spine X-ray was taken in standing position to measure the lumbar lordotic angle (LLA), Ferguson angle (FA) and lumbar gravity line (LGL). A Pearson correlation was used to measure the correlation between obesity and lumbar lordosis (SPSS 10.0 for windows). Results : Body mass index (BMI kg/㎡) had a negative relationship with LLA((equation omitted)=-0.469), FA((equation omitted) =-0.347) and LGL((equation omitted)=-0.389). Body fat rate had a negative relationship with LLA only(γ=-0.385). Waist circumference had a negative relationship with LLA((equation omitted)=-0.345) and LGL((equation omitted)=-0.346). WH ratio had no relationship with lumbar lordosis. Conclusion : These data show that obesity is related to mechanical structures, such as lumbar lordosis. BMI was the most useful index, which reflects a change of mechanical structure of lumbar, more than other variables in this study.

• 대한약침학회지
• /
• 제17권2호
• /
• pp.7-17
• /
• 2014

Objectives: Condurango is widely used in various systems of complementary and alternative medicines (CAM) against oesophageal and stomach ailments including certain types of cancer. However, until now no systematic study has been conducted to verify its efficacy and dose with proper experimental support. Therefore, we examined if ethanolic extract of Condurango could ameliorate benzo[a]pyrene (BaP)-induced lung cancer in rats, in vivo to validate its use as traditional medicine. Methods: Fifteen male and 15 female Sprague-Dawley (SD) rats were treated with 0.28 mg/kg of Sweet Bee Venom (SBV) (high-dosage group) and the same numbers of male and female SD rats were treated with 0.2 mL/kg of normal saline (control group) for 13 weeks. We selected five male and five female SD rats from the high-dosage group and the same numbers of male and female SD rats from the control group, and we observed these rats for four weeks. We conducted body-weight measurements, ophthalmic examinations, urinalyses and hematology, biochemistry, histology tests. Results: A histological study revealed gradual progress in lung tissue-repair activity in Condurango-fed cancer-bearing rats, showing gradual tissue recovery after three months of drug administration. Condurango has the capacity to generate reactive oxygen species (ROS), which may contribute to a reduction in anti-oxidative activity and to an induction of oxidative stress-mediated cancer cell-death. Condurango-activated pro-apoptotic genes (Bax, caspase-3, caspase-9, p53, cytochrome-c, apaf-1, ICAD and PARP) and down-regulated antiapoptotic-Bcl-2 expression were noted both at mRNA and protein levels. Studies on caspase-3 activation and PARP cleavage by western blot analysis revealed that Condurango induced apoptosis through a caspase-3-dependent pathway. Conclusion: The anticancer efficacy of an ethanolic extract of Condurango for treating BaP-induced lung cancer in rats lends support for its use in various traditional systems of medicine.

• 한국지반공학회논문집
• /
• 제35권12호
• /
• pp.15-24
• /
• 2019

국내 다수의 지역에 분포하는 화강 풍화대 지반은 지반구조물의 주요 지지층으로 활용되고 있으므로 화강 풍화대의 지반특성을 평가하는 것은 중요하다. 풍화대 지반은 실내시험을 위한 불교란 시료를 채취하는 것이 어렵기 때문에 일반적으로 표준관입시험(SPT: Standard penetration test)을 통해 지반특성을 평가하고 있다. 프레셔미터시험(PMT: Pressuremeter test)은 풍화대 지반의 응력 - 변형률 거동을 신뢰도 높게 평가하는 대표적인 현장시험이지만 소요 시간과 비용의 제약으로 제한적인 시험만을 수행하고 있다. 본 연구에서는 화강 풍화대에서 수행된 SPT-N₆₀ 값과 PMT 결과의 상관성 분석을 수행하였으며, N₆₀ - E_m(E_m: Pressuremeter modulus)과 N₆₀ - P_L(P_L: Limit pressure) 관계식을 제안하였고 선행 연구 결과와 비교 분석하였다.

• 한국항공우주학회지
• /
• 제45권1호
• /
• pp.21-29
• /
• 2017

복합재료 적층판 기계적 체결부(ASTM D5961 Proc. A, B)에 대하여 치구 설계에서 시험 결과의 해석까지 전체 과정을 제시하였다. 복합재료 적층판 기계적 체결부를 유한요소법을 사용하여 분석하였으며 시험 결과와 비교하였다. 시험편의 파손 거동을 분석하기 위해 점진적 파손해석 방법을 유한요소법에 적용하였다. 시험 파손 하중을 예측하기 위해 3가지 파손이론(최대 응력, 최대 변형률, Tsai-Wu)을 FEM에 적용하였다. 기계적 체결부의 일반적인 변수들을 검토하였으며 주요 변수에 대하여 베어링 강도 차이를 비교하였다.

• 한국지반환경공학회 논문집
• /
• 제15권12호
• /
• pp.43-51
• /
• 2014

준설토 내 유기물질은 지반침하, 균열, 지지력 저하 및 내부마찰각 감소 등 지반공학적으로 많은 문제를 가지고 있는 반면 농업의 관점에서는 지반 내 유기물질이 함유되어 있을수록 양질의 토사로서 식생의 성장에 크게 기여한다. 따라서 본 논문에서는 유기질을 함유한 준설토를 재활용하여 고화토를 제작하였으며, 고화토의 유기질 함량(0 %, 10 %, 20 %, 30 %)에 따른 역학적 특성과 식생발아 특성과의 관계를 분석하였다. 유동성 시험, 일축압축 시험 및 압밀 시험 등 다양한 실내 시험을 통해 고화토의 역학적 특성을 알아보았으며, pH, 발아율 및 초장길이 측정을 통해 식생발아 특성을 알아보았다. 실험 결과 유기물 함량이 증가할수록 일축 압축강도는 감소하고 압축지수 및 팽창지수는 증가하는 것으로 나타났다. 반면 식생의 발아율 및 초장길이는 유기물 함량이 증가함에 따라 점차 증가하는 경향을 보였다.

• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.1-5
• /
• 2015

In this study, we apply an ultrasonic nanocrystal surface modification (UNSM) technique to radial journal bearings (JBs) and disks made of SUJ2 and SCM440, respectively. We investigate frictional properties of untreated and UNSM-treated specimens using a ball-on-disk tester. We construct the Stribeck curve at the boundary, under mixed and full hydrodynamic lubrication conditions for the specimens using friction data obtained from JB tests. The friction at the boundary lubrication condition and the transition period to mixed lubrication condition on the UNSM-treated specimens is reduced, which improves the service life of JBs. The major effects of this reduction in the three lubrication regimes can be explained in the terms of improved mechanical properties and the presence of micro dimples. Moreover, we estimate the friction and fatigue properties of SCM440 specimens using a ball-on-disk specimen under dry and oil-lubricated conditions. Friction test results reveal that the UNSM-treated specimens show lower friction coefficient than the untreated specimens under both dry and oil-lubricated conditions. We evaluate the fatigue properties of SCM440 specimens by calculating the Hertzian stress with respect to the failure cycles. Fatigue tests results also reveal that the UNSM-treated specimens possess a longer fatigue life than the untreated specimens. The improved properties are effective in increasing the energy efficiency of bearings.

• Tribology and Lubricants
• /
• 제36권1호
• /
• pp.47-54
• /
• 2020

In this study, the effects of ultrasonic nanocrystal surface modification (UNSM) treatment at room and high temperatures (RT and HT of 400℃) on friction and wear behavior of Ti-6Al-4V alloy prepared by selective laser melting (SLM) were investigated. The objective of this study is to improve the mechanical properties and frictional behavior of Ti-6Al-4V alloy by UNSM treatment. Dry friction and wear tests were conducted using a ball-on-disk method at RT with a bearing steel as the counter ball. Due to the high HT and UNSM treatment, the surface hardness tended to increase and surface roughness tended to reduce. X-ray diffraction (XRD) analysis showed that nanocrystallization structure and compressive residual stress were formed at the surface layer after UNSM treatment at both RT and HT. After UNSM treatment, it was observed that the wear rate was reduced by about 6% for the specimen treated at RT and a 28% reduction for the specimen treated at HT in comparison with the untreated one. Based on scanning electron microscope (SEM) images showed that the damage caused by fatigue wear occurred in the wear track of the heat-treated specimen, and it is believed to be the cause of the highest wear rate. Mechanical properties and wear resistance of Ti-6Al-4V alloy were improved and prospect of industrial application was confirmed. Further research is still required to improve the characteristics of SLM Ti-6Al-4V alloy to the level of wrought Ti-6Al-4V alloy.

• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.133-138
• /
• 2016

기존에는 로봇 말단에 6축 힘/토크 센서를 부착하여 로봇의 힘제어 및 충돌감지를 수행하였지만, 이 방법은 매우 고가이고, 로봇의 몸체에서 발생한 충돌을 감지할 수 없었다. 이의 대안으로 각 관절에 관절 토크센서를 장착하였으나, 토크 측정 시에 발생하는 다양한 오차로 인하여 실제 적용에 한계가 있었다. 이러한 문제를 해결하고자 본 연구에서는 정확한 토크 측정을 위한 관절 토크센서 및 이를 포함하는 관절모듈을 개발하였다. 제안된 관절모듈은 로봇에 인가되는 모멘트 부하를 지지하고, 조립 시 발생하는 응력을 감소시키기 위하여 토크센서에 디스크형 커플링을 첨가하여 원하는 회전토크만을 효과적으로 측정할 수 있도록 하였다. 본 논문에서는 다양한 실험을 통하여 제안한 토크센서의 성능을 검증하였다.

• 한국정밀공학회지
• /
• 제29권4호
• /
• pp.409-416
• /
• 2012

Recently, surface modification technology is of importance to improve the wear resistance and the corrosive resistance for high accurate mechanical parts such as LM guide, Ball Screw and Roller Bearing etc., Those has generally featured on rolling contact mechanism to improve not only the wear and the friction, but also the accuracy and the corrosion performances. For surface modifications of high accurate mechanical parts, normally thermal spray, PVD, CVD and E.P. processes have been used with many materials such as DLC, raydent, W, Ni, Ti etc. Diamondlike carbon (DLC) films possess a combination of attractive properties and have been largely employed to modify the tribological behaviors such as friction, wear, corrosion, fretting fatigue, biocompatibility, etc. However, for rolling contact mechanism mechanical parts DLC films are needed to study for commercial benefit. Rolling contact mechanism has features on effects of cyclic motions and stresses, and also not simply sliding motions. The papers focused on the performance test of wear and corrosive resistance according to Me-DLC film thickness. And also, its thickness effect of wear analysis was carried out through the simulation of the maximum shear stress under the rolling contact surface. As the results, Me-DLC films have more potential to improve the wear resistance for high precision mechanical parts than raydent films.