References
- Stewart, S. and Ahmed, R., "Rolling contact fatigue of surface coatings-a review," Wear, Vol. 253, No. 11-12, pp. 1132-1144, 2002. https://doi.org/10.1016/S0043-1648(02)00234-X
- Farley, J., Wrobel, L. C. and Mao, K., "Low cycle fatigue simulation and fatigue life prediction of multilayer coated surfaces," Wear, Vol. 269, No. 9-10, pp. 639-646, 2010. https://doi.org/10.1016/j.wear.2010.06.009
- Wang, Y. and Hadfield, M., "Rolling contact fatigue failure modes of lubricated silicon nitride in relation to ring crack defects," Wear, Vol. 225-229, Part 2, pp. 1284-1292, 1999. https://doi.org/10.1016/S0043-1648(98)00402-5
- Klaffke, D., Santner, E., Spaltmann, D. and Woydt, M., "Influences on the tribological behaviour of sliprolling DLC-coatings," Wear, Vol. 259, No. 1-6, pp. 752-758, 2005. https://doi.org/10.1016/j.wear.2005.01.008
- Manier, C. A., Theiler, G., Spaltmann, D., Woydt, M. and Ziegele, H., "Benchmark of thin film coatings for lubricated slip-rolling contacts," Wear, Vol. 268, No. 11-12, pp. 1442-1454, 2010. https://doi.org/10.1016/j.wear.2010.02.020
- Polonsky, I. A., Chang, T. P., Keer, L. M. and Sproul, W. D., "An analysis of the effect of hard coatings on near-surface rolling contact fatigue initiation induced by surface roughness," Wear, Vol. 208, No. 1, pp. 204-219, 1997. https://doi.org/10.1016/S0043-1648(96)07479-0
- Manier, C. A., Ziegele, H., Barriga, J., Goikoetxea, J. and Woydt, M., "Zirconium-based coatings in highly stressed rolling contacts as alternative solution to DLC and ta-C coatings, " Wear, Vol. 269, No. 11-12, pp. 770-781, 2010. https://doi.org/10.1016/j.wear.2010.08.004
- Ringsberg, J. W., "Life prediction of rolling contact fatigue crack initiation," International Journal of Fatigue, Vol. 23, No. 7, pp. 575-586, 2001. https://doi.org/10.1016/S0142-1123(01)00024-X
- Ko, M. W., Kim, S. Y., Shin, S. Y., Lee, S. H., Tanaka, A., Umeda, K., Mizuhara, K., Park, D. H. and Choi, M. S., "The report on the performance test and improvement of wear resistance by surface modification," Ministry of Trade and Industry, 1995.
- Ko, M. W., Kim, S. Y., Shin, S. Y., Byeon, J., Shim, K. S., Heo, C. W., Kim, C. Y., Koo, B. W. and Choi, S. W., "Development on High density Diamond Coatings Technology by Ion-Sputtering Methods," Ministry of Trade and Industry, 1993.
- Rabinowicz, E., "Friction and Wear of Materials," John Wiley & Sons, Inc., pp. 169-170, 1995.
- Singh, V., "Synthesis, Structure, and Tribological Behavior of Nanocomposite DLC Based Thin Films," Agricultural and Mechanical College, Degree of Doctor of Philosophy, Louisiana State University, 2004.
- Houghton, P. S., "Ball and Roller Bearings," Applied Science Publications, pp. 110-146, 1976.
- Harris, T. A., "Rolling Bearing Analysis," Willey Interscience Publications, pp. 110-143, 1991.
- Hills, D. A., Nowell, D. and Sackfield, A., "Mechanics of Elastic Contacts," Butterworth- Heinemann, pp. 291-319, 1993.
- Raydent Company, www.raydent.co.jp
- Bec, S., Tonck, A. and Fontaine, J., "Nanoindentation and nanofriction on DLC films," Philosophical Magazine, Vol. 86, No. 33-35, pp. 5465-5476, 2006. https://doi.org/10.1080/14786430600596845
- Gangopadhyaya, A., Sinhaab, K., Uya, D., Mcwatta, D. G., Zdrodowskia, R. J. and Simkoa, S. J., "Friction, Wear, and Surface Film Formation Characteristics of Diamond-Like Carbon Thin Coating in Valvetrain Application," Tribology Transactions, Vol. 54, No. 1, pp. 104-114, 2011.
- Shimizu, S., "Fatigue Limit Concept and Life Prediction Model for Rolling Contact Machine Elements," Tribology Transactions, Vol. 45, No. 1, pp. 39-46, 2002. https://doi.org/10.1080/10402000208982519
- Kim, W. B., Cha, K. H., Park, C. W., Lee, S. J. and Park, C. S., "A Study on the Life of Ball Screws," Proc. of KSPE Spring Conference, pp. 894-899, 1997.