• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.51-58
• /
• 2005

The development of the high-efficiency machine-tools equipment and new cutting tool materials with high hardness, heat- and wear-resistance has opened the way to application of high-speed cutting process. The basic argument of using of high-speed cutting processes is the reduction of time and the respective increase of machining productivity. In this sense, the spindle units may be regarded as one of the most important units, directly affecting many parameters of high-speed machining efficiency. One of the possible types of spindle units for high-speed cutting is the air-bearing type. In this paper, we propose the mathematical model of the dynamic behavior of the air-bearing spindle. To provide the high-level of speed capacity and spindle rotation accuracy we need the adequate model of "spindle-bearings" system. This model should consider characteristics of the interactions between system components and environment. To find the working characteristics of spindle unit we should derive the equations of spindle axis movement under the affecting factors, and solve these equations together with equations which describe the behavior of lubricant layer in bearing (bearing stiffness equations). In this paper, the three influence coefficients are introduced, which describe the center of spindle mass displacement, angle of shaft rotation around the axes under the unit force application and that under the unit torque application. These coefficients are operated in the system of differential equations, which describes the spindle axis spatial movement. This system is solved by Runge-Kutta method. Obtained trajectories and amplitude-frequency characteristics were then compared to experimental ones. The analysis shows good agreement between theoretical and experimental results, which confirms that the proposed model of air-bearing spindle is correctis correct

• 한국지반공학회논문집
• /
• 제33권6호
• /
• pp.17-25
• /
• 2017

본 연구에서는 매입식 PHC 기성말뚝에 대한 포스트 그라우팅 공법을 적용하고, 정재하 실험을 수행하여 포스트그라우팅 공법의 지지력 증강효과를 확인하였다. 그라우팅 압력은 1.9MPa 및 3.5MPa을 적용하였으며, 그라우팅을 수행하지 않은 미보강 말뚝과의 지지력을 비교하였다. 정재하 실험 결과를 바탕으로 PHC 말뚝의 지지력을 분석한 결과, 말뚝의 항복 하중은 약 3배 이상 증가하였으며 설계효율은 당초 32%에서 97%로 증가하였다. 또한, 그라우팅 공법을 적용한 말뚝의 축방향 강성은 그라우팅 주입압의 약 1.3배 비율로 증가하였다.

• 한국지반환경공학회 논문집
• /
• 제8권6호
• /
• pp.5-12
• /
• 2007

이암은 건조 조건에서는 일정한 강도와 강성을 가지나, 지하수 침투 등에 의한 습윤, 포화 시 고유의 강도 및 강성이 저하되어 급속히 풍화되는 특성을 가지며, 포항지역에서 자주 발생하는 절취사면의 활동은 주로 이암이 풍화되어 전단강도가 급격히 저하되는 것으로 볼 수 있다. 본 연구는 시추조사시 강성이 충분한 것으로 평가된 이암층에 PRD강관말뚝을 시공한 후 정재하 시험을 실시한 결과 소요지지력이 부족하여, 이를 보강하기 위한 가장 우수한 방법을 찾기 위하여 여러 가지 공법을 검토하였다. 말뚝지지력 증대에 가장 효과적인 방법을 찾기 위해 말뚝주변 및 선단부에 MSG공법, 마이크로파일 보강후 주변그라우팅공법, 선단보강 그라우팅 및 콘크리트 속채움 등의 방법으로 시험시공을 실시하였고, 시험말뚝에 대한 정재하시험 결과 MSG공법으로 보강한 말뚝의 지지력이 가장 우수함을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.381-387
• /
• 2002

In this work, the dynamic characteristics of an oil-lubricated, short SFD with a central feeding groove are derived based on a theoretical analysis considering the effect of a groove. The validity of the analysis is investigated experimentally using an Active Magnetic Bearing (AMB) system as an exciter. For the theoretical solution, the fluid film forces of a grooved SFD are analytically derived so that the dynamic coefficients of a SFD are expressed in terms of its design parameters. For the experimental validation of the analysis, a test rig using AMB as an exciter is proposed to identify the dynamic characteristics of a short SFD with a central groove. As an exciter, the AMB represents a mechatronic device to levitate and position the test journal without any mechanical contact, to generate relative motions of the journal inside the tested SFD and to measure the generated displacements during experiments with fairly high accuracy. Using this test rig, experiments are extensively conducted with different clearance, which is one of the most important design parameters, in order to investigate its effect on the dynamic characteristics and the performance of SFDs. Damping and inertia coefficients of the SFD that are experimentally identified are compared with the analytical results to demonstrate the effectiveness of the analysis. It is also shown that AMB is an ideal device for tests of SFDs.

• Tribology and Lubricants
• /
• 제39권4호
• /
• pp.139-147
• /
• 2023

Cavitation phenomena observed during the operation of a submerged plain journal bearing (PJB) can affect bearing performance parameters such as dynamic coefficients, whirl frequency ratio, and critical mass. This study presents numerical solutions of the Reynolds equation for steadily and dynamically loaded submerged PJBs with half-Sommerfeld (HS), Reynolds, and Jakobsson-Floberg-Olsson (JFO) cavitation models when the supply pressure is larger or equal to the cavitation pressure. The loads at various eccentricity ratios are identical; however, the attitude angle is approximately 6% smaller when the eccentricity ratio is between 0.2 and 0.7 and the JFO model is used, compared to that when the Reynolds model is used. Dynamic coefficients obtained with the HS and Reynolds model show good agreement with each other, except for k_xz, which is sensitive to changes in the force normal to the rotor weight, and is attributed to the difference in the attitude angle obtained with each cavitation model. Stiffness coefficients are determined using the pressure distribution in the film, and therefore, when the JFO model is used, the direct stiffness coefficients are affected and show opposite signs for most eccentricity ratios. The mass-conservative JFO model can predict at least a 30% smaller critical mass compared to that using the HS and Reynolds models. Thus, the instability analysis results can change based on the cavitation model used in a submerged PJB. The results of this research indicate that the JFO model should be used when designing a rotor system supported by submerged PJBs.

• 한국터널지하공간학회 논문집
• /
• 제8권1호
• /
• pp.31-40
• /
• 2006

최근 부각되고 있는 환경친화적인 설계의 결과로서 터널 입출구의 구조물이 연약한 지반(붕적층) 에 불가피하게 건설 되곤 한다. 그런 터널 공사의 경우, 주변 지반뿐만 아니라 라이닝 지보재의 충분한 지지력을 확보해야 한다. 이와 관련하여, 높은 강성을 갖는 H형 강지보재가 라이닝을 지지하기 위해 흔히 사용되었다. 그러나 수치해석에 의한 구조적인 안정성을 평가하는데 있어서 그 효과는 무시되는 젓이 관례였다. 본 연구에서는 붕적층에 적용된 터널에 대하여 강지보재로 사용된 H형강을 수치해석 모델에서 강성 적용을 0%, 50%, 75%, 100%로 반영하여 3차원 유한요소해석을 수행하였고, 각 강성 적용율에 따른 숏크리트 용력 감소효과를 비교 검토하였다. 수치해석으로부터 얻어진 데이터는 현장계측결과와 비교하였다, 연구 결과로부터 강지보재의 숏크리트에 대한 효과가 검증되었고 적절한 강성률은 50~75%의 범위 내에서 적절한 것으로 판단되었다.

• 한국항공우주학회지
• /
• 제34권6호
• /
• pp.92-97
• /
• 2006

케이징 구조 유연성을 고려한 30톤 추력급 터보펌프에 대한 임계 속도 해석이 수행되었다. 로터와 케이징을 포함한 전체 모델에 대한 3차원 유한요소법이 회전체 동역학 특성을 예측하기 위하여 적용되었다. 케이징 구조 유연성의 영향을 고찰하기 위하여 로터 단독 모델과 고정-고정 및 자유-자유 경계조건을 갖는 로터-케이징 연계 모델에 대한 수치 해석이 이루어 졌다. 무부하 하중 조건과 부하 하중 조건에서의 볼 베어링 강성이 각각 진공 조건과 실제 엔진 장착 조건에서의 작동을 모사하기 위하여 사용되었다. 수치해석 결과로부터 케이징 구조 유연성의 영향이 터보펌프의 임계 속도를 감소시킴을 확인하였다. 특히, 높은 베어링 강성을 갖는 부하 로터 조건에서 낮은 베어링 강성을 갖는 무부하 로터 조건에 비하여 더 많은 영향을 받음을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.617-628
• /
• 2017

In order to study the failure mode and seismic behavior of the interior-joint in steel traditional-style buildings, a single beam-column joint and a double beam-column joint were produced according to the relevant building criterion of ancient architectural buildings and the engineering instances, and the dynamic horizontal loading test was conducted by controlling the displacement of the column top and the peak acceleration of the actuator. The failure process of the specimens was observed, the bearing capacity, ductility, energy dissipation capacity, strength and stiffness degradation of the specimens were analyzed by the load-displacement hysteresis curve and backbone curve. The results show that the beam end plastic hinge area deformed obviously during the loading process, and tearing fracture of the base metal at top and bottom flange of beam occurred. The hysteresis curves of the specimens are both spindle-shaped and plump. The ultimate loads of the single beam-column joint and double beam-column joint are 48.65 kN and 70.60 kN respectively, and the equivalent viscous damping coefficients are more than 0.2 when destroyed, which shows the two specimens have great energy dissipation capacity. In addition, the stiffness, bearing capacity and energy dissipation capacity of the double beam-column joint are significantly better than that of the single beam-column joint. The ductility coefficients of the single beam-column joint and double beam-column joint are 1.81 and 1.92, respectively. The cracks grow fast when subjected to dynamic loading, and the strength and stiffness degradation is also degenerated quickly.

• Steel and Composite Structures
• /
• 제29권4호
• /
• pp.451-464
• /
• 2018

This paper presents some quasi-static tests for 4 mixed columns composed of CFST column and RC column. The seismic performance and failure mode were studied under low-cyclic revised loading. The failure mode was observed under different axial compression ratios. The hysteretic curve and skeleton curve were obtained. The effects of axial compression ratio on yield mechanism, displacement ductility, energy dissipation, stiffness and strength attenuation were analyzed. The results indicate that the failure behavior of CFST-RC mixed column with archaized style is mainly caused by bending failure and accompanied by some shear failure. The axial compression ratio performs a control function on the yielding order of the upper and lower columns. The yielding mechanism has a great influence on the ductility and energy dissipation capacity of specimens. Based on the experiment, finite element analysis was made to further research the seismic performance by ABAQUS software. The variable parameters were stiffness ratio of upper and lower columns, axial compression ratio, yielding strength of steel tube, concrete strength and rebar ratio. The simulation results show that with the increase of stiffness ratio of the upper and lower columns, the bearing capacity and ductility of specimens can correspondingly increase. As the axial compression ratio increases, the ductility of the specimen decreases gradually. The other three parameters both have positive effect on the bearing capacity but have negative effect on the ductility. The results can provide reference for the design and engineering application of mixed column consisted of CFST-RC in Chinese archaized buildings.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.103-110
• /
• 2021

유연한 고무재료와 강재 보강판을 적층으로 구성한 탄성받침은 우수한 수직강성과 유연한 횡강성으로 교량의 내진보강용으로 널리 사용되고 있다. 무엇보다 시공이 간단하고 비용이 높지 않다는 장점을 지니고 있다. 고무재료의 한 종류인 합성고무는 천연고무에 비해 노화에 대한 저항성이 크지만 이 역시 다양한 열화요인으로 성능이 저하된다. 내진설계기준 및 내진성능평가요령에서는 이러한 노화의 특성을 반영하고 있지 않지만 관련 연구가 축적되면 이를 반영하는 것이 합리적이다. 합성고무를 대상으로 노화촉진시간과 노출시간을 변수로 하여 노화촉진시험을 수행하여 전단특성의 변화를 분석하였다. 노화가 진행될수록 최대전단응력과 전단변형율은 감소한다. 또한 동일한 전단변형률에서 전단강성이 크게 증가한다.