• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.347-351
• /
• 2004

The cryogenic test facility is developed for test of deep groove ball bearings, floating ring seals, materials (steel & copper) for High Pressure Turbopump of liquid rocket engine (LRE). The cryogenic bearing test is performed to evaluate the flow rate of cooling water and the load-carrying capacity of bearings. The cryogenic seal test is performed to evaluate the determination of magnitude of leakages through the seal, a time variation of this magnitude. The test of the materials Pair is performed to evaluate its fitness for operation in the liquid oxygen medium.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2205-2215
• /
• 1992

본 연구에서는 동 베어링에 대한 해석을 바탕으로 원주방행 급유홈 프로팅링 저널베어링으로 지지된 탄성 회전체의 안정성에 대한 이론을 전개함과 동시에 실험을 통해 동 베어링의 안정성을 조사하고자 한다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.113-114
• /
• 2002

Radial, tilting 12-pad proceeding bearings are applied as the radial bearings of vertical rotors of water turbines. The mean loads are stable at the peripheral speeds of proceeding reaching 50 m/s. The operation of tilting 12-pads proceeding bearing has been introduced at the assumption of adiabatic oil film. The oil film pressure, temperature and viscosity distributions have been obtained by iterative solution of the Reynolds', energy and viscosity equations. The resulting oil film force, minimum oil film thickness, power loss, oil flow, maximum oil film pressure, maximum temperature have been computed for different load angle of bearing.

• 한국지반환경공학회 논문집
• /
• 제16권7호
• /
• pp.5-13
• /
• 2015

압입강관말뚝공법은 기초보강, 상부 및 지하 증축, 부등침하 복원 등에 사용되는 공법으로 유압잭을 이용하여 좁은 공간에서 시공이 가능한 기초 보강공법이다. 이 공법의 특징은 협소한 공간, 낮은 층고, 근접 시공이 가능하고, 무소음 및 무진동 공법이며 슬라임을 배출하지 않아서 시공현장을 청결하게 유지할 수 있다. 또한 모든 말뚝을 유압잭의 압입하중으로 시공하므로 시공 중 지지력 확인이 가능하다. 본 연구에서는 압입강관말뚝에 대하여 하중전이시험을 수반한 말뚝 정재하시험을 수행하여 압입강관말뚝의 하중지지 거동 특성을 파악하였다. 그리고 말뚝 시공 후 경과시간에 따른 압입강관말뚝의 지지거동의 변화를 확인하기 위하여 총 4회의 정재하시험을 실시하였다. 재하시험 결과, 압입강과말뚝의 허용지지력은 최소 637kN 이상으로 나타났고, 재하하중의 81~86%를 마찰하중이 지지하는 것으로 나타났다. 그리고 대체적으로 2개월이 경과하면 단위주면마찰력은 최대값에 도달하는 것으로 평가되었다.

• KSTLE International Journal
• /
• 제2권1호
• /
• pp.46-54
• /
• 2001

The herringbone groove journal bearing (HGJB) has chevron type grooves on stationary or rotating member of the bearing so that they pump the lubricant inward the grooves when journal rotates. As a result, the pressure is generated around the journal so that the radial stiffness and dynamic stability are improved comparing to the plain journal bearing (PJB) when the bearing operates near the concentric condition. The narrow groove theory, conventionally adopted to simulate the concentric operation of HGJB, is limited to the infinite number of grooves. A numerical study of air-lubricated HGJB is presented for the finite number of grooves. The compressible isothermal Reynolds equation is solved by using Finite Element Method together with the Newton-Raphson iterative procedure and perturbation method. The solutions render the static and dynamic performances of HGJB. Comparison of present results with a PJB validates previously published finite difference solution. The HGJB's geometric parameters influence its static and dynamic characteristics. The optimum geometric parameters are presented for the air-lubricated HGJB in particular conditions.

• KSTLE International Journal
• /
• 제1권2호
• /
• pp.107-112
• /
• 2000

In case of the limitation of Deep RIE fabrication far Micro Gas Turbine, bearing aspect ratio is limited in very small value. The characteristics such as pressure distribution, load capacity and non-linearity of a short bearing of L/D=0.083 and a conventional bearing of L/D=1.0 with coupled boundary effects are investigated for Micro Gas Turbine bearings. The coupled effect was analyzed by mass conservation at coupled end area. The results, increasing load capacity and non-linearity due to the coupled effect of thrust and journal bearing, are obtained and the selection of journal bearing type is discussed.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.23-29
• /
• 2001

Cylindrical type of self-controlled restrictor are designed for hydrostatic bearing of grinding wheel spindle. Typical hydrostatic journal bearing with the designed restrictor is analytically model. According to the model, the affect of oper-ation parameters, such as, initial cross distance, supply pressure, diameter of two supply holes, pre-load of spring, and clearance between spindle and housing, on bearing stiffness are analyzed. From the results of the analysis, the optimum conditions of operation parameters that maximize the bearing stiffness are estimated.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.335-342
• /
• 2004

The failures such as flaking, wear, crack and seizing caused by the high contact pressure accompanied with sliding motion between inner or outer ring and ball are potential failures of ball bearing. In this research, we have qualitatively selected the efficient test items through the analysis of the life and potential failures of ball bearing. The bearing's failures are related closely to the whole system in using the bearing. So, the bearing itself requires an estimation of life in order to opreate the system safely. We have tested ten ball bearings. Our research has applied both radial and axial direction force of maximum torque conditions simultaneously for the accelerated life testing. The result is established by employing the weibull plot and compared the predicted life of ball bearing to the experimental result.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.721-728
• /
• 2008

Top-Base Method is a stabilization method for light weight structures particularly in the soft ground. It is widely used for the increment of bearing capacity and the effect of restraining settlement when the bearing capacity of the ground is not enough. Top-shaped cone concrete foundations are installed in graveled laid over soft ground. The principle of the basic method is to maximize effect of dispersing the overburden pressure by increasing the contact area of the top-shaped cone. Therefore, the bearing capacity is increased and the settlement is decreased by the embedded resistance of pile part in the ground. In this paper, the plate bearing test was conducted to evaluate the feasibility of Top-Base foundation. Based on the test results, the coefficient of subgrade reaction, elastic modulus, and settlement of foundation on reclaimed land was derived.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.8-13
• /
• 2003

Equivalent Reynolds equation of truncated cone type SFD bearing using nonnewtonian EV fluid is derived. The 3 nondimensional oil film pressures and its forces are obtained with axial and circumferential pressure gradient of bearing respectively, and dynamic characteristics for the stability of rotor-bearing system are obtaind through the governing equation for an elastic rotational shaft. It is shown that EV fluid is less sensitive to the changes of oil-film than newtonian fluids for dynamic characteristics. Therefore, results show that it is better to use an EV fluid with truncated cone type SFD bearing for the vibration control of rotational machines.