• 정보저장시스템학회논문집
• /
• 제8권1호
• /
• pp.27-32
• /
• 2012

Fluid dynamic bearings have several advantages that low noise, high rotational stability and low friction. So, early 2000s, the HDD spindle motors have been replaced ball bearings to fluid dynamic bearing. Most of studies apply inner boundary condition that is inside of bearing pressure larger than atmosphere pressure. Therefore, they used Half-Sommerfeld or Reynolds Boundary condition. This paper investigates the dynamic coefficients of the plain journal considered vapor pressure. As a result, it shows that the vapor pressure effect cannot ignore.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.219-223
• /
• 2001

Within a mechanical system such as an automotive the number of standard machine parts is increasing, so that the parts selection becomes more important than ever before. Selection of appropriate bearings in the preliminary design phase of a machine is also important. In this paper, three decision-making approaches are compared to find out a model that is appropriate to bearing selection problem. An artificial neural network, which is trained with real design cases, is used to select a bearing mechanism at the first step. Then, the subtype of the bearing is selected by the weighting factor method. Finally, types of peripherals such as lubrication methods are determined by a rule-based expert system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.930-935
• /
• 2001

The experimental characterization of hydrodynamic bearing spindle motor is performed for the practical implementation of high-performance hard disk drive system. Firstly, the design concept of hydrodynamic bearing for the disk drive system is addressed including the herringbone grooved journal bearing, the spiral grooved thrust bearing, capillary seal design, and the viscous pumping of fluid. Secondly, the experimental evaluation is performed for the disk drive system in which the hydrodynamic bearing spindle motor is implemented and its dynamic performances are compared with conventional ball-bearing spindle motor. The key parameters include NRRO(Non Repeatable Run-Out), disk dynamics, acoustics, and resultant PES (Position Error Signal). Finally, the external gyro-exciting test results including 200k CSS(Continuous Start-Stop) on three angular attitudes(0,90, 180 degree) are presented in order to verify the practical reliability of disk drive system subject to the gyro-motion of hydrodynamic bearing spindle motor.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.115-116
• /
• 2002

This study was carried out as one of efforts to overcome difficulties in air bearing design due to low stiffness and low damping. Hydrodynamic effects on hydrodynamic stiffness of a fluid film in a high speed air bearing with tow-row air sources are investigated. The hydrodynamic effects by the high speed over DN 1,000,000 and eccentricity of a proceeding which are not considered in conventional design of an air bearing need to be reconsidered. The hydrodynamic effects, which dominantly influence on the load capacity of air bearing, are caused mainly by proceeding speed, eccentricity, and the source positions. The two-row source arrangement in the air bearing produces quite unique hydrodynamic effects with respect to pressure distribution of the air film. Optimal arrangement of the two-row sources improves performance of an air bearing in film reaction force and loading capacity of high speed spindles. This study compares the pressure distribution by numerical simulation as a function of eccentricity of proceeding and the source positions. The air source position 1/7L form one end of an air bearing was found to be superior to source position of 1/4L. The dynamic stiffness were obtained using a two-dimensional cutting method which can directly measure the cutting reaction forces and the displacements of the spindle in two directions using a tool dynamometer and transducer sensors. Heat generation in the air film can not be negligible over the speed of DN 2,000,000. In order to analysis effects of heat generation on the characteristics of air bearing, high cooling bearing spindle and low cooling bearing spindle were tested and compared. Characteristics of the frequency response of shaft and motion of run out errors were different for the spindle. The test results show that, in the case of low cooling bearing spindle, the stiffness became smaller due to heat generation. The results, which were obtained for high speed region, may be used as a design information for spindle which can be applied to precision devices such as ultra precision grinding and ultra high speed milling.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.15-17
• /
• 2022

볼 베어링 선택조립 시스템에서 잉여부품을 최소화하기 위해서는 각 부품의 치수 분포를 파악하여 선택 확률을 최적화하여야 하지만, 복잡한 시스템은 생산 공정에 지연이 일으킨다. 본 논문에서는 볼 베어링 선택조립 시스템에서 빠르고 간단하게 선택 우선순위를 결정할 수 있는 군집 우선 선택 알고리즘을 제안한다. 그리고 실제 볼 베어링 선택조립 공정에서 수집한 데이터로 모의 상황을 가정하고, 군집 우선 선택 알고리즘과 기존 알고리즘을 시뮬레이션하여 잉여부품 발생률과 연산소요시간을 평가한다. 시뮬레이션 결과, 군집 우선 선택 알고리즘이 기존 알고리즘에 비하여 83.8% 적은 잉여부품을 발생하였고, 연산소요시간도 39.7% 단축되었다.

• 대한의생명과학회지
• /
• 제20권3호
• /
• pp.147-155
• /
• 2014

It has well studied that immune cells are strongly related to tumor progression and tumor suppression. To identify the difference of immune cell between tumor bearing mice and normal mice, we examined systemically the immune cell of CT26 tumor bearing mice on 21 days after tumor cell administration. As previously reported, CD4+ and CD8+ T cells population of tumor bearing mice significantly decreased 38% and 30% on day 21 compared to that of normal mice, respectively. All subpopulation of CD4 and CD8+ T cell significantly decreased, except CD49b+ T cell subpopulation. But, myeloid cell population ($CD11b^{high}$ and all Gr-1+ subpopulation) of tumor bearing mice significantly increased on day 21. Especially, all subpopulation of CD11b+Gr-1+ cell of tumor bearing mice significantly increased on day 21. Also, Foxp3+$CD25^{high}$ CD4 T cell (regulatory T cells) population significantly increased on day 21. These results suggest that tumor can induce the decline of T lymphocyte and the expansion of myeloid cells and regulatory T cells, and provide the basic information for the study of tumor immunology.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.97-98
• /
• 2014

Vibration signal has been widely utilized in the diagnostics of rotating mechanical system. Diagnostics systems in rotating machinery are depends on the vibration data which are acquired from the system. However, the characteristics of acquired data can be vary according to the position of anomaly installed or the position of data acquired. In this research, the coordinate transform of journal bearing vibration signal was proposed to overcome the limitation mentioned above. Journal bearing systems are equipped two gap sensors with ninety degree angles, and it can enable to generate coordinate transformed signals in arbitrary angle domain. More abundant information for each normal or anomaly conditions are obtained from coordinate transformation than only the data of the existing measuring position, then we have developed a reliable and robust diagnosis algorithm for journal bearing system.

• Communications for Statistical Applications and Methods
• /
• 제12권2호
• /
• pp.381-394
• /
• 2005

In order to estimate the damage of orchards due' to natural disasters such as typhoon, severe rain, freezing or frost, it is necessary to estimate the number of fruit bearing before and after the damage. To estimate the fruit bearing after the damages are easily done by delegations, but it cost too high to survey every insured farm household and calculate the fruit bearing before the damage. In this article, we suggest to use a random coefficient model to predict the numbers of fruit bearing in the orchards before the damage based on the tree age and the area information.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.792-795
• /
• 2005

The guide-ways of precision machine tools are one of important element of machine tools. It has usually a pair of surfaces for constraint of one direction with bearing. In the case of precision machine tools, non-contact bearing such as hydrostatic bearing and aerostatic bearing is adopted usually. In this case, profiles of rails has effect on straightness and the clearance of bearing has effect on stiffness of guide way, which changes to higher if clearance changes to smaller. The clearance is varied along moving table according to relative distance of pair of rails. The relative distance of pair of rail can be divided by three properties. First and second properties are straightness of each pair of rail and bearing pad. And, third is parallelism about pair of rails and pairs of bearing pad. There are several methods for measuring straightness of each surface such as reversal method, sequential two point method, and way straightness. These straightness measuring methods are always acquiring deviation of profile from eliminating linear fitted inclined line and don't have the information of parallelism. Therefore, to get the small clearance for high stiffness, the straightness of rail and bearing pad and parallelism about pair of rails and pair of bearing pads are measured for correction such as regrinding, reassembling and lapping. In this research, new and easy method for measuring parallelism of pair of rails is suggested. Two displacement probe and sensor stage, which is carry on the displacement sensor, are needed. The simulation and experiment was accomplished about pair of horizontal guide way to confirm the measurement of parallelism. And, the third probe is added to measure the straightness of each rails by sequential two point method. From the estimation of combined these two methods, it is confirmed that the profiles of a pairs of rails can be measured.

• KSTLE International Journal
• /
• 제4권1호
• /
• pp.18-26
• /
• 2003

Recently, fluid dynamic bearings (EDBs) have important applications in miniature rotating machines such as those found in the computer information storage industry, due to their outstanding low acoustic noise and NRRO (Non-Repeatable Run Out) characteristics. This research investigates the dynamic behavior of fluid dynamic bearings composed of hydrodynamic herringbone groove journal and spiral groove thrust bearing. The five degrees of freedom of FDB are considered to describe the real motion of a general rotor bearing system. The Reynolds equation and five nonlinear equations of motion for the dynamic behavior are solved simultaneously, The incompressible Reynolds equation is solved by using the finite element method (FEM) in order to calculate the pressure distribution in a fluid film and the five equations of motion by using the Runge-Kutta method. The reaction forces and moments are obtained by integrating the pressure along the fluid film. Numerical results are validated by comparing with the previously published experimental and numerical results. As a result the dynamic behavior of FDB spindle such as orbit, floating height, and angular orbit is investigated by considering the conical motion under the static and dynamic load conditions.