• 한국지반공학회논문집
• /
• 제33권6호
• /
• pp.27-36
• /
• 2017

자갈다짐말뚝(Gravel Compaction Pile) 공법은 연약지반 개량공법 중의 하나로 육상 및 해상에서 연약 지반을 개량하기 위해 많이 사용되어 왔다. 자갈다짐말뚝으로 보강된 지반의 극한 지지력은 자갈다짐말뚝 및 지반의 강도, 치환율, 시공조건 등에 영향을 받으며 이를 예측하기 위한 다양한 예측식이 제안되었다. 하지만 기존 예측식을 활용한 극한지지력 예측은 오차율 및 변동성이 매우 크며, 실제 설계에 활용하기에는 부적합한 것으로 나타났다. 본 연구에서는 자갈다짐말뚝으로 보강된 지반의 극한 지지력을 예측하기 위하여 현장 재하시험결과를 활용한 다중회귀분석을 수행하였으며, 단일잔류 교차검증에 따른 예측오차평가를 통하여 가장 효율적인 입력변수를 선정하고 이에 대한 극한 지지력 예측식을 제안하였다. 또한 선정된 입력변수를 활용하여 인공신경망 적용에 따른 극한 지지력 예측오차를 평가하고 이를 기존 예측식에 따른 결과와 비교 분석하였다.

• 지질공학
• /
• 제30권4호
• /
• pp.635-648
• /
• 2020

본 연구는 회전관입말뚝의 이음부를 용접이나 볼트가 필요 없는 육각형 이음부로 개선하여 압축재하시험을 수행하였다. 또한 인발시험의 경우 기존 방법과 유사하게 볼트체결 방법으로 적용하여 인발시험을 수행하였다. 회전관입말뚝의 지지력을 평가하기 위해 현장시험 2지역을 선정하였다. 하중재하시험은 정재하시험과 인발시험을 수행하였으며 회전관입말뚝에 대한 지지력을 평가하였다. 현장시험결과, 정재하시험시 중력식 그라우트를 적용한 말뚝에서 AC 358 Code에 따른 지지력평가 결과 600 kN 이상으로 나타났으며, 그라우트가 없는 말뚝에서는 600 kN 이하의 지지력을 보여 중력 그라우팅이 필요함을 확인하였다. 또한 현장시험결과를 고려하여 지지력을 평가하였으며, 적은 표본에 의해서 도출된 결과로 추후 기초자료로 활용될 수 있을 것으로 판단된다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.187-193
• /
• 2001

This paper is results of extensive centrifuge model experiments about design factors influencing the bearing capacity and the settlement behaviors of SCP (Sand Compaction Pile). Centrifuge model tests were carried out changing design factors for SCP method such as replacement area ratio (as= 20, 40, 70%), improvement ratio to footing width (W/B = 1, 2, 3), and amount of fines in sand pile (#200 = 5, 10, 15). Therefore, the effects of these design factors on the bearing capacity and the settlement behavior of SCP were investigated and changes of stress concentratio rato due to such an design factors were also investigated. Centrifuge model testing technique for preparing and installing centrifuge model of sand compaction pile, using freezing them, was also developed. As results of centrifuge model tests, more fines in sand compaction pile increases the bearing capacity of SCP. Optimum improvement ratio to footing width was found to be 2. Values of stress concentration ratio was in the ranges of 1.5 - 3.5. The depth of bulging in sand piles was found in the range of 2.0 - 2.5 times of pile diameter.

• 산업기술연구
• /
• 제22권A호
• /
• pp.145-151
• /
• 2002

This paper is results of extensive centrifuge model experiments about design factors influencing the bearing capacity and the settlement behaviors of SCP (Sand Compaction Pile). Centrifuge model tests were carried out changing design factors for SCP method such as replacement area ratio (as= 20, 40, 70%), Improvement ratio to footing width (W/B = 1, 2, 3), and amount of fines m sand pile (#200 = 5, 10, 15). Therefore, the effects of these design factors on the bearing capacity and the settlement behavior of SCP were investigated and changes of stress concentratio rato due to such an design factors were also investigated. Centrifuge model testing technique for preparing and installing centrifuge model of sand compaction pile, using freezing them, was also developed. As results of centrifuge model tests, more fines in sand compaction pile increases the bearing capacity of SCP. Optimum improvement ratio to footing width was found to be 2. Values of stress concentration ratio was in the ranges of 1.5 - 3.5. The depth of bulging in sand plies was found in the range of 2.0 - 2.5 times of pile diameter.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.1-9
• /
• 2019

This paper proposes a new numerical approach to model geocell reinforced soils, where the geocell is described as membrane elements and the complex interaction between geocell and soil is realized by coupling their degrees of freedom. The effectiveness and robustness of this approach are demonstrated using two examples, i.e., a geocell-reinforced foundation and a large scale retaining wall project. The first example validates the approach against established solutions through a comprehensive parametrical study to understand the influence of geocell on the improvement of bearing capacity of foundations. The study results show that reducing the geocell pocket size has a strong effect on improving the bearing capacity. In addition, when the aspect ratio maintains the same value, the bearing capacity improvement with increasing geocell height is insignificant. Comparing with the field monitoring and measurement in the project, the second example investigates the application of the approach to practical engineering projects. This paper provides a practically feasible and efficient modelling approach, where no explicit interface or contact is required. This allows geocell reinforced soils in large scale project can be effectively modelled where the mechanism for complex geocell-soil interaction can be explicitly observed.

• Geomechanics and Engineering
• /
• 제19권4호
• /
• pp.329-342
• /
• 2019

In this paper, the effect of a group of sand columns in the loose soil bed using triaxial tests was studied. To investigate the effect of geotextile reinforcement type on the bearing capacity of these sand columns, Vertical encased sand columns (VESCs) and horizontally reinforced sand columns (HRSCs) were used. Number of sixteen independent triaxial tests and finite element simulation were performed on specimens with a diameter of 100 mm and a height of 200 mm. Specimens were reinforced by either a single sand column or three sand columns with the same area replacement ratio (16%) to evaluate the Influence of the column arrangement. Effect the number of sand columns, the length of vertical encasement and the number of horizontal reinforcing layers were investigated, in terms of bearing capacity improvement and economy. The results indicated that the ultimate bearing capacity of the samples with three ordinary sand columns (OSCs) is eventually about 11% more than samples with an OSC. Also, comparison of the column reinforcing modes showed that four horizontal layers of geotextile achieved similar performance to a vertical encasement geotextile at the 50% of the column height, from the viewpoint of strength improvement, while from the viewpoint of economy, the geotextile needed for encasing the single column is around 2.5 times of the geotextile required for four layers.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 가을 학술발표회 논문집
• /
• pp.33-42
• /
• 1993

Geocell is a three dimensional cellular confinement system that forms a reocomposite mattress with infill material to increase the bearing capacity dramatically rather than geotextiles of nonwoven and woven fabric type and geogrid. In terms of design, this geocell confinement is quite complex to assess and is different in its hieoretical evaluation and its concept from other geosynthetic products. Thsi study is aimed to help a basic understanding on Geoweb system, which is known to be the most effective and easiest in handling among the geocell systems ever developed, by introducing two method of interpretation for the improvement of bearing capacity. Thus the writers are sillingly to help the geotechnical engineers and the site engineers who might be encountered with the bearing capacity problems on site.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.272-279
• /
• 2005

This paper introduces a new method of improvement for marine soft ground, MLPP(Marine Large Pack Pile). The MLPP is a reinforcement technique for the conventional SCP or GCP piles by confining with geotextile pack. A pilot project at Busan New Port site and laboratory model tests were carried out to investigate the settlement reduction and bearing capacity enhancement effect of pack pile. The results of field and laboratory tests show that MLPP method can be a safe and economic alternative method for SCP and GCP.

• 한국지반공학회지:지반
• /
• 제10권3호
• /
• pp.5-16
• /
• 1994

본 논문은 향후 현장에서 유용하게 사용될 수 있는 사질토층에 있어서 정방형 얕은 기초의 지지력 향상을 위한 새로운 Geogrid 보강토 방법을 제시하고자 하였다. 기계 기초, 철로 제방, 그리고 지진 예상 지역의 구조물 기초 등에 대한 지반은 Geogrid로 보강하는 것이 필수적이다. 보강되지 않은 사질토층과 보강된 사질토층에 대한 지지력을 비교하였으며 또한 극한 지지력을 증대시키기 위해 보강재의 길이, 설치 간격 및 폭을 평가하였다. 모형 실험 결과 Geogrid보강재는 중간 정도의 밀도를 가진 사질토층에서 극한 지지력이 상당량 증가됨을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.611-618
• /
• 2002

In this study the CGS as an injection method by low slump mortar was performed the pilot test to confirm the applicability of this method and the effectiveness of settlement restraint. From the results, there has been concluded the construction control standard such as an institutional diameter, space, depth, injection materials, Infection pressure etc. Also, there has been estimated the ground improvement effectiveness which has resulted from the field investigation and consolidation test etc. From the results, in the adjacent ground the CGS, generally, has been confirmed to in-crease ground strength to improve the consolidation characteristic obtained from the field investigation and consolidation test. Especially, the CGS which performed the larger stiffness to the ground has been concluded that the settlement restraint to the ground complicates the ground effect which Increases the bearing capacity and stress assignment. So, the CGS can be considered as an effective method to increase the bearing capacity as well as the settlement restraint of soft ground.