• 한국통신학회논문지
• /
• 제40권3호
• /
• pp.469-477
• /
• 2015

본 논문에서는 고밀집 환경에서 대용량 MIMO가 장착된 무선랜 시스템의 효율을 높이기 위한 방식으로 결합공간 분할 및 재사용 기법을 제안한다. 제안한 기법은 다중 안테나로 생성할 수 있는 공간 자원을 간섭을 미리 억제하는데 사용하는 공간 자원과 캐리어 센싱 및 전송을 하는데 이용하는 공간 자원으로 분리한다. 분리된 공간자원의 양에 따라 다른 캐리어 센싱 한계값을 할당하여, 해당 공간 자원으로의 전송 여부를 결정한다. 이 방식은 공간 분할 (spatial division) 최적화 문제와 공간 재사용 (spatial reuse) 최적화 문제를 동시에 고려해 네트워크의 전송 용량을 최대화한다. 시뮬레이션을 통해 제안한 기법이 IEEE 802.11에서 정의된 캐리어 센싱 기법보다 네트워크의 용량을 133% 증가시키므로 차세대 무선랜 시스템에 적용하여 사용자에게 우수한 전송 품질을 제공해 줄 수 있음을 보인다.

• 지질공학
• /
• 제24권1호
• /
• pp.137-146
• /
• 2014

연구지역의 지질은 흑색천매암, 석회암 및 함역천매암과 중생대 관입안인 흑운모화강암과 석영반암으로 구성되어 있다. 이 중 흑색천매암이 분포하는 구간에서 건설 중인 도로 사면에서 절토사면 현황도(face map)를 4월부터 6월까지 3개월간 작성하였으며 이때 탄질슬레이트 분포지 부근을 포함 사면 내에는 3-4개소에서 사면붕괴와 산 정상부에는 최고 3 m의 변위를 보이며 움직이고 있음이 확인 되었다. 사면 붕괴의 원인은 엽리 및 단층 등의 불연속면의 경사방향이 사면의 경사방향과 일치하는 곳에서 붕괴가 발생하였고 탄질 슬레이트는 빗물을 머금을 때 팽창성을 가짐도 붕괴가 일어나는 원인이다. 반면 본 사면의 도로 맞은편 사면에서는 같은 암상 및 지질구조 조건을 가지고 있으나 엽리 및 불연속면들의 경사 방향이 사면의 경사 방향과 반대방향이므로 안정된 사면을 유지하고 있다. 사면의 붕괴가 일어난 곳에서 안정화를 위해 절개 후 복구(cut and cover) 방법으로 도로의 양쪽 사면 사이 도로 상에 터널 구조물을 설치하여 절개식 터널(cut and cover tunnel)을 시공하였으며 시공 후 사면은 안정화 되었다.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.80-86
• /
• 2009

The Cu-bearing PFS-700 steel which has yield strength over 700 MPa was developed to replace the existing submarine structural material, HY-100. The PFS-700 steel has a combination of good mechanical properties and superior weldability. Becaus of that, it can be welded without pre-heating. The application of PFS-700 steel to submarine or battle ship will give a great reduction of cost by omitting pre-heating or lowering pre-heat temperature. To develop pre-heating free welding consumables that match and take advantage of PFS-700 steel, new welding consumables have been designed for the GMAW, SAW processes and explosion bulge test(EBT) was conducted to see the reliability of welded structure. All welds were made without pre-heating, and the inter-pass temperature was below $50^{\circ}C$ for SAW50 and $150^{\circ}C$ for GMAW and SAW150. All EBT specimens show over 14% thickness reduction without through-thickness crack or crack propagation to the hole-down area. Tensile properties for all welding conditions show higher(GMAW) or similar values(SAW50, SAW150) to the base metal. Charpy impact values for the weld metal also show 163.5J(GMAW), 95.4J(SAW50) and 69.0J(SAW150), which meet the goal(higher than 50J) of this project.

• Korean Journal of Acupuncture
• /
• 제22권1호
• /
• pp.95-108
• /
• 2005

Objective : In the present study, the effect of electroacupuncture (EA) applied to several acupoints and non-acupoint in CFA-induced knee arthritis was examined. Methods : A common source of persistent pain in humans is arthritis. Arthritis was induced by injection of CFA $125\;{\mu}l$ into knee joint cavity under enflurane anesthesia. The rat subsequently showed swelling of the ankle and a reduced stepping force of the affected limb for the next several days. The reduced stepping force of the limb was presumably due to a painful knee. EA was applied to either of $LR_2,\;LI_4$, or non-acupoint on the contralateral forelimb for 30 min under gaseous anesthesia. After the termination of EA, behavioral tests measuring stepping force were periodically conducted during the next 4 h. Results : EA applied to $LR_2$ point produced a significant improvement of stepping force of the affected foot lasting for at least 2 h. However, neigher $LI_4$ point nor non-point produced any significant increase of weight bearing force. The improvement of stepping pressure was interpreted as an analgesic effect. The analgesic effect was specific to the acupuncture point since the analgesic effect on CFA-induced knee arthritic pain model could not be mimicked by EA applied to a point, $LI_4$ or non-acupoint. In addition, both NO production and iNOS protein expression increased by arthritis were suppressed by EA applied to $LR_2$ point. Conclusion : These data suggest that EA produces a potent analgesic effect in the rat model of CFA-induced knee arthritis. This analgesic effect is produced by applying EA to an acupoint at opposite side from the painful area in a stimulus point-specific way.

• 자원환경지질
• /
• 제21권3호
• /
• pp.287-307
• /
• 1988

The Cheongju gold-silver mine is located at approximately $36^{\circ}28^{\prime}$north latitude and $127^{\circ}31^{\prime}$ east longitude in the Cheongju City of the Chung cheong bug Do, South Korea. Gold-Silver bearing hydrothermal quartz veins, occur in Cheongju Granit of Jurassic age. K-Ar isotope data for sericite in quartz vein indicate that the Au-Ag mineralization took place in early Cretaceous ($97.5{\pm}2.18$ MA. Park, et ai, 1986). Three stage of mineralization recognized anre, from early to later, (I) Sulide stage: pyrite, arsenopyrite, pyrrhotite (Hpo), sphalerite, chalcopyrite, electrum and quartz (II) Electrum stage: pyrite, sphalerite, galena, chalcopyrite, electrum and quartz. (III) Silver mineral stage: pyrite, marcasite, pyrrhotite (Mpo), sphalerite, galena, electrum, native silver argentite, fluorite, calcite and quartz. In this paper, mode of occurrences and chemical compositions of electum and native silver have been investigated by means of microscope and EPMA. Electron probe microanalysis shows that an individual grain of electrum is almost homogeneous in composition. Silver content of electrum ranges from 44.7-67.1 atom.%. Gold content of native silver ranges below 0.2 atom. %. Vicker's hardness number (VHN) of electrum and native silver ranges $78.2-81.8kg/mm^{2}$ respectively. The filling temperature of fluid inclusions in quartz ranges from $130-280^{\circ}C$. On the basis of arsenpyrite geothemometer, the equilibrium temperature and sulfur fugacity of the pyrite-arsenopyrite-pyrrhotite(Hpo) assemblage is assumed to be in ange from $300-310^{\circ}C$ and $10^{-10}$ to $10^{-11}$ atm. The estimated ore reserviors on Cheongju mine area are calculated to 8000 T/M, averaing 8.6g/t Au, 27.8 g/t Ag, 1.25% Pb, l.65% Zn.

• 산업경영시스템학회지
• /
• 제26권3호
• /
• pp.24-30
• /
• 2003

As domestic buildings have been large-scaled, diversified and high-rise, there have been a consistent demand for design, development of construction technology and accident prevention activity as well as quality enhancement. In spite of governmental and related institutions' efforts for reducing national losses which come from numerous accidents, there have been endless small and large accidents on the construction site and thus, it is urgent to conduct empirical researches in this area. Currently safety supervision system in construction industry has enforced harm and danger prevention planning system, however it merely stick to other existing materials. In addition, it is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM(Process Safety Management) method using AHP(Analytic Hierarchy Process) and to development of PSM evaluation method in the construction. The reason why PSM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries, thereby strengthening their competitive edges. Boost of safety control system by PSM method could make an enormous contribution to preventing construction accidents on the site by establishing and securing an autonomous safety control system.

• 광물과 암석
• /
• 제33권2호
• /
• pp.129-141
• /
• 2020

모곡변성대는 과거 루비 광산들이 분포하던 지역으로, 주로 시생대 결정질암으로 구성된 고원지대이며, 보석류가 충적층에서 확인되어 표사광상을 이루고 있다고 미얀마지질조사광물탐사국의 미발간보고서에 수록되어있다. 루비와 함께 확인되는 광물로는 첨정석, 석류석, 홍전기석 등이 있다. 보석이 발견되는 충적층을 이루는 자갈류는 주로 편마암 및 페그마타이트 쇄설물로 구성되어있다. 특히 신구, 모곡, 모메익 지역에는 보석을 함유하는 다수의 페그마타이트가 모곡변성암류, 섬록암 및 화강암 등을 관입하여 분포한다. 신구 페그마타이트에서는 보석으로서 홍전기석, 고세나이트, 청인회석 및 자주 인회색이 산출된다. 모메익 페그마타이트에서는 보석으로서 버섯형 홍전기석, 페타라이트, 햄버어자이트, 폴류사이트 및 아쿠아마린이 산출된다. 모곡 페그마타이트에서는 보석으로서 황옥, 아쿠아마린, 고세나이트 및 허더라이트가 산출된다.

• 구강회복응용과학지
• /
• 제34권4호
• /
• pp.331-337
• /
• 2018

상악골 결손을 갖고 있는 무치악 환자를 폐쇄장치로 수복할 때 임상가들은 많은 어려움을 겪게 된다. 결손부를 통한 공기의 누출, 안정성과 지지의 부족, 감소된 의치 피개 면적은 의치의 흡착과 변연 폐쇄를 어렵게 한다. 본 증례는 편평상피암에 이환된 우측 상악동 부위에 상악골 절제술을 받은 무치악 환자로 술전 치과 검진, 수술용 폐쇄장치, 이행 폐쇄장치, 그리고 최종 폐쇄장치에 이르는 단계적 치료 과정을 통해 보철적 재건을 완료하였다. 본 증례의 환자는 전상악골 및 양측 상악 결절이 온전하며 한정된 크기의 결손부를 가져 적절한 유지와 지지를 갖는 폐쇄장치를 제작할 수 있었으며 심미 및 기능면에서 양호한 예후를 보였기에 이를 보고하는 바이다.

• Hip & pelvis
• /
• 제30권4호
• /
• pp.219-225
• /
• 2018

Purpose: Ischiofemoral impingement (IFI)-primarily diagnosed by magnetic resonance imaging (MRI)-is an easily overlooked disease due to its low incidence. The purpose of this study was to evaluate the usefulness of false profile view as a screening test for IFI. Materials and Methods: Fifty-eight patients diagnosed with IFI between June 2013 and July 2017 were enrolled in this retrospective study. A control group (n=58) with matching propensity scores (age, gender, and body mass index) were also included. Ischiofemoral space (IFS) was measured as the shortest distance between the lateral cortex of the ischium and the medial cortex of lesser trochanter in weight bearing hip anteroposterior (AP) view and false profile view. MRI was used to measure IFS and quadratus femoris space (QFS). The receiver operating characteristics (ROC), area under the ROC curve (AUC) and cutoff point of the IFS were measured by false profile images, and the correlation between the IFS and QFS was analyzed using the MRI scans. Results: In the false profile view and hip AP view, patients with IFI had significantly decreased IFS (P<0.01). In the false profile view, ROC AUC (0.967) was higher than in the hip AP view (0.841). Cutoff value for differential diagnosis of IFI in the false profile view was 10.3 mm (sensitivity, 88.2%; specificity, 88.4%). IFS correlated with IFS (r=0.744) QFS (0.740) in MRI and IFS (0.621) in hip AP view (P<0.01). Conclusion: IFS on false profile view can be used as a screening tool for potential IFI.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.583-591
• /
• 2018

Tool-chip adhesion impacts on cutting performance significantly, especially in finish cutting process. To promote cutting tools' anti-adhesion property, the concave micro-grooves texture (MGT) and convex volcano-like texture (VLT) were fabricated separately on lathe tools' rake faces by laser surface texturing (LST). Various orientations of MGT and different area densities (9% and 48%) and regions (partial and full) of VLT were considered in textured patterns designing. The following orthogonal cutting experiments, machining of aluminum alloy 5038, analyzed tools' performances including cutting force, cutting stability, chip shape, rake face adhesion and abrasion. It indicated that under dry finish cutting conditions, MGT contributed to cutting stability and low cutting forces, meanwhile friction and normal force reduced by around 15% and 10%, respectively with a weak correlation to the grooves' orientation. High density VLT tools, on the other hand, presented an obvious anti-adhesion property. A $5{\mu}m$ reduction of crater wear's depth can be observed on textured rake faces after long length cutting and textured rake faces presented half size of BUE regions comparing to the flat tool, however, once the texture morphologies were filled or worn, the anti-adhesion effect could be invalid. The bearing ratio curve was employed to analysis tool-chip contact and durability of textured surfaces contributing to a better understanding of anti-adhesion and enhanced durability of the textured tools.