• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.15-24
• /
• 2021

This study is about the introduction and usefulness evaluation of the manufacturing method of the bolus-helmet. Helmet-production for the treatment of scalp tumor patients has been tried and will continue in many creative and various ways. However, Most of the research data did not significantly reduce the psychological burden and physical and physical discomfort that the patient had to bear due to the time and economic cost required for the production of the helmet, the convenience of production, and the complexity of the process. In addition, recently, studies using more advanced technologies and equipment such as 3D-printer technology, which are being studied as a way to increase the treatment effect, are being introduced, but the time, economic cost, and psychological and physical burden are still the sole responsibility of the patient. Isn't it getting worse? The reality is that the thoughts of concern cannot be erased. Therefore, by maintaining the physical properties of the bolus and manufacturing a helmet without incurring additional costs, the physical and physical discomfort aggravated to the patient was reduced and the procedure and time for helmet manufacturing were minimized. In this way, it was possible to reduce the time, economic cost, and physical discomfort required for the production of the helmet, and it was also possible to minimize the psychological burden of the patient, although it is invisible. Additionally, in evaluating the usefulness of helmets, we are able to continuously seek and develop ways to reduce the air-gap interval, and as a result, we will be able to introduce a method to keep it within 2.0mm along with the manufacturing method through this study. I feel very welcome. Finally, I hope that anyone working in the Department of Radiation Oncology will be able to easily manufacture the helmet required for radiation therapy using a bolus through the guide-line on helmet manufacturing provided by this institute. I hope and hope that if you have any questions or inquiries that arise during the production process, please feel free to contact us through the researcher's e-mail or mobile phone at any time.

• Journal of Service Research and Studies
• /
• v.12 no.2
• /
• pp.1-22
• /
• 2022

This study was conducted based on the service philosophy as a study to capitalize on the wisdom of Korea and Koreans. This is a study that capitalizes on the wisdom of the founding president who led civilization changes in Korea. Wisdom as a visionary leader who played a leading role in Korea's development from a continental civilization to a maritime civilization was derived. We analyzed the wisdom of the founding president, who established the Republic of Korea with a new identity as a liberal democracy and protected it, and laid the foundation for Korea to leap into an advanced country through legal system reform and human resource development. First, we analyzed the essence of politics and presented the essential tragic nature that visionary leaders must bear as politicians. We also analyzes his courage and belief to accept a tragic fate, the insights on the spirit of independence, anti-communism, liberal democracy and the future. We analyze the wisdom as a visionary leader that is consistently revealed through countless choices and decisions to give up. It suggests that such wisdom is essential for the founding and development of a nation, and the wisdom need to be assetized. It needs a solid philosophical foundation to become a useful wisdom asset in the long run. In this study, Syngman Rhee's wisdom was assetized on the basis of the service philosophy. This is because it is wisdom based on the fiercely symmetrical balance principle. Human resource development was a choice that entailed great sacrifice, the market economy was a choice that entailed great sacrifice, and the protection of liberal democracy was also a choice that entailed great sacrifice, so it can be said that it is wisdom that fits the essence of the service philosophy. It is wisdom found only in outstanding visionary leaders. We present the wisdom of building a free democratic country, the wisdom of building a free market economy, and the wisdom of building a talent-oriented nation as assets in terms of national management philosophy, national management owner, time frame, and strategic asset. It also suggests that visionary leaders are continuously required for the long-term sustainable development of mankind and Korean society.

• Sim-seong Yeon-gu
• /
• v.33 no.1
• /
• pp.1-60
• /
• 2018

The paper was inspired by Jung's words in the Red Book "just as Christ tormented the flesh through the spirit, the God of this time will torment the spirit through the flesh." I propose that the new form of torment in this era could be eroticism as a way of the individuation process because it seems to be one of a very few ways left to modern men to grasp the sense of permanence, the essence of the divine, without religion because of its peculiar nature of transcendence. I suppose that it is not only a man who is tortured but also god is in torment since the divine needs a man as a womb for his incarnation. Therefore I suggest that man and god are fated to seduce each other to be redeemed by each other. I imagine that Eros with numinous sexuality seduces a man who has potentials for the god's incarnation and who would be willing to give in to the god's demand. This god needs a man who desires his essence of perpetuity, the eternal water of life, in ecstasy. Thus the purpose of the divine's seduction is to make a man awake from unconsciousness to pursue god himself, namely the individuation process. I call such divine seduction "eroticism of god" There seem to be a certain type of people who are destined to live eroticism as a way of individuation process. Through investigations, a melancholic tendency appears to be suitable for this type of individuation. Melancholia is deeply related to the poignant awareness of impermanence as the existential condition, which is a precondition for seeking permanence through eroticism. Melancholia essentially causes deep longing for eternity that bears fulfillment, which exists in eroticism, so melancholic agony seems inevitable for eroticism as the path for individuation in that, without knowing about deficiency, we never seek what is lacking in us. It can also be viewed that while a lover is driven to seduce lost love, what actually waits to become seduced for redemption is the god of love itself behind the human beloved. Man and god are fated to seduce each other for redemption. I suppose that the initiation to Eros implies how to seduce Eros. In a woman's psyche, psychological virginity is one of the essential qualities that her ego needs to attain. To the male it is vital to live his sensuality thoroughly and to experience his own and his lover's emotions to their limit. It cannot be an easy task because it demands us to give up our egotism entirely. Through eroticism, unconsciousness seduces us to make us live life as a whole. The god of love brings powerful sexuality as a means of "spiritual crisis" to redeem our lukewarm soul. Only a few can withstand the experience since it requires a strong will to bear the brunt of the sword despite the keen awareness that it may leave us bleeding in pain.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.3-51
• /
• 2017

From a historical point of view, while the Warsaw Convention was passed in 1924 to regulate the unified judicial responsibility in the global air transportation industry, protection of airline consumers was somewhat lacking in protecting air carriers. In principle, the air carrier does not bear any obligation or liability when the aircraft is not operated normally due to natural disasters such as typhoon or heavy snowfall. However, in recent years, in developed countries such as the US and Europe, there has been a movement in which regulates the air carriers' obligation to protect their passengers even if there is no misconduct or negligence. Furthermore, the legislation of such advanced countries imposes an obligation on the airlines to compensate the loss separately from damages in case the abnormal operation of the aircraft is not caused by force majeure but caused by their negligence. Under this historical and international context, Korea is also modifying the system of aviation consumer protection by referring to other foreign legislation. However, when compared with foreign countries, our norm has a few drawbacks. First, the airline's protection or care obligations are mixed with the legal liability for damages in the provision, which seems to be due to the lack of understanding of the airline's passenger protection obligation. The liability for damages, which is governed by the International Convention or the Commercial Act, shall be determined by judging the cause of the airline's liability in respect of the damage of the individual passenger in the course of the air transportation. However, the duty to care and the burden for compensation shall be granted to all passengers who feel uncomfortable with the abnormal operation regardless of the cause of the accident. Also, our compensation system for denied boarding due to oversale is too low compared to the case of foreign countries, and setting the compensation amount range differently based on the time for the re-routing is somewhat unclear. Regarding checked-baggage claim, it will be necessary to refund the fee only from the fact that the baggage is delayed without asking whether there is any damage occurred from the delayed baggage. This is the content of the duty to care, which is different from the current Commercial Act or the international convention, in which responsibility is different depending on whether the airline takes all the necessary measures in order to prevent delaying of the baggage. The content of force majeure, which is a requirement for exemption from the obligation to care passengers on the airplane, shall be reconsidered. Maintenance for safe navigation is not considered to be included in force majeure, and connection to airplanes, airport conditions are disputable. According to the EC Regulation, if the cause of the abnormal operation of the airline is force majeure, the airline's compensation obligation is exempted but the duty to care of airline company is still meaningful. Furthermore, even if the main role of aviation consumer protection is on an airline, it is the responsibility of government agencies to supervise the fulfillment of such protection obligations. Therefore, it is necessary for the Korean government to actively take measures such as enforcing incentives for airlines that faithfully fulfill their obligation to care and imposed penalties on the contrary.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.177-200
• /
• 2017

This writer have thus far reviewed the civil and criminal obligations of the directors of a parent company that sponsored financially troubled affiliates. What was discussed here applies to logistics companies in the same manner. Hanjin Shipping cannot expect its parent company, Korean Air to prop it up financially. If such financial aid is offered without any collateral, under Korean criminal law, the directors of the parent company bears the burden of civil and criminal responsibility. One way to get around this is to secure fairness in terms of the process and the content of aid. Fairness in terms of process refers to the board of directors making public all information and approving such aid. Fairness in terms of content refers to impartial transactions that block out any possibilities of the chairman of the corporate group acting in his private interest. In the case of Korean Air bailing out Hanjin, the meeting of board of directors were held five times and a thorough review was conducted on the risks involved in the loans being repaid or not. After the review, measures to guard against undesirable scenarios were established before finally deciding on bailing out Hanjin. As such, there are no issues. In terms of the fairness of content, too, there were practically no room for the majority shareholder or controlling shareholder to pocket profits at the expense of the company. This is because the continued aid offered to a financially troubled company (i.e. Hanjin Shipping) was a posing a burden to even the controlling shareholder. This writer argues that the concept of the interest of the entire corporate group needs to be recognized. That is, it must be recognized that the relationship of control and being controlled between parent company and affiliate company, or between affiliate companies serves a practical benefit to the ongoing concern and growth of the group and is therefore just. Moreover, the corporate group and its affiliates, as well as their directors and management must recognize that they have an obligation to prioritize the interests of the corporate group ahead of the interests of the company that they are directly associated with. As such, even if Korean Air offered a loan to Hanjin Shipping without collateral, the act cannot be treated as an offense to law, nor can the directors be accused of damages that they bear the responsibility of compensating under civil law.

• The Korean Journal of Air & Space Law and Policy
• /
• v.21 no.1
• /
• pp.169-189
• /
• 2006

In 2007, KSLV(Korea Small Launching Vehicle) that we made at Goheung National Space Center is going to launch and promotes of our space exploration systematically and 'Space Exploration Promotion Act' was enter into force. 'Space Exploration Promotion Act' article 3, section 1, as is prescribing "Korean government keeps the space treaties contracted with other countries and international organizations and pursues after peaceful uses of outer space." The representative international treaties are Outer Space Treaty (1967) and Liability Convention (1972) etc. In Liability convention article 2, "A launching State shall be absolutely liable to pay compensation for damage caused by its space object on the surface of the earth or to aircraft in flight. The important content of the art. 2 is the responsible entity is the 'State' not the 'Company'. According by Korean Space Exploration Act art. 14, person who launches space objects according to art. 8 and art. 11 must bear the liability for damages owing to space accidents of the space objects. Could Korean government apply the Products Liability Act which is enter into force from July 1, 2002 to space launching person? And what is the contact type between Korea Aerospace Research Institute(KARl) and Russia manufacturer. Is that a Co-Development contract or Licence Product contract? And there is no exemption clause to waive the Russia manufacturer's liability which we could find it from other similar contract condition. If there is no exemption clause to the Russia manufacturer, could we apply the Korean Products Liability Act to Russia one? The most important legal point is whether we could apply the Korean Products Liability Act to the main component company. According by the art. 17 of the contract between KARl and the company, KARl already apply the Products Liability Act to the main component company. For reference, we need to examine the Appalachian Insurance co. v. McDonnell Douglas case, this case is that long distance electricity communication satellite of Western Union Telegraph company possessions fails on track entry. In Western Union's insurance company supplied to Western Union with insurance of $ 105 millions, which has the satellite regard as entirely damage. Five insurance companies -Appalachian insurance company, Commonwealth insurance company, Industrial Indemnity, Mutual Marine Office, Northbrook Excess & Surplus insurance company- went to court against McDonnell Douglases, Morton Thiokol and Hitco company to inquire for fault and strict liability of product. By the Appalachian Insurance co. v. McDonnell Douglas case, KARl should waiver the main component's product liability burden. And we could study the possibility of the adapt 'Government Contractor Defense' theory to the main component company.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.35-58
• /
• 2009

A treaty that governs the compensation on damage caused by aircraft to the third parties on surface was first adopted in Rome in 1933, but without support from the international aviation community it was replaced by another convention adopted again in Rome in 1952. Despite the increase of the compensation amount and some improvements to the old version, the Rome Convention 1952 with 49 State parties as of today is not considered universally accepted. Neither is the Montreal Protocol 1978 amending the Rome Convention 1952, with only 12 State parties excluding major aviation powers like USA, Japan, UK, and Germany. Consequently, it is mostly the local laws that apply to the compensation case of surface damage caused by the aircraft, contrary to the intention of those countries and people who involved themselves in the drafting of the early conventions on surface damage. The terrorist attacks 9/11 proved that even the strongest power in the world like the USA cannot with ease bear all the damages done to the third parties by the terrorist acts involving aircraft. Accordingly as a matter of urgency, the International Civil Aviation Organization(ICAO) picked up the matter and have it considered among member States for a few years through its Legal Committee before proposing for adoption as a new treaty in the Diplomatic Conference held in Montreal, Canada 20 April to 2 May 2009. Accordingly, two treaties based on the drafts of the Legal Committee were adopted in Montreal by consensus, one on the compensation for general risk damage caused by aircraft, the other one on compensation for damage from acts of unlawful interference involving aircraft. Both Conventions improved the old Convention/Protocol in many aspects. Deleting 'surface' in defining the damage to the third parties in the title and contents of the Conventions is the first improvement because the third party damage is not necessarily limited to surface on the soil and sea of the Earth. Thus Mid-air collision is now the new scope of application. Increasing compensation limit in big gallop is another improvement, so is the inclusion of the mental injury accompanied by bodily injury as the damage to be compensated. In fact, jurisprudence in recent years for cases of passengers in aircraft accident holds aircraft operators to be liable to such mental injuries. However, "Terror Convention" involving unlawful interference of aircraft has some unique provisions of innovation and others. While establishing the International Civil Aviation Compensation Fund to supplement, when necessary, the damages that exceed the limit to be covered by aircraft operators through insurance taking is an innovation, leaving the fate of the Convention to a State Party, implying in fact the USA, is harming its universality. Furthermore, taking into account the fact that the damage incurred by the terrorist acts, where ever it takes place targeting whichever sector or industry, are the domain of the State responsibility, imposing the burden of compensation resulting from terrorist acts in the air industry on the aircraft operators and passengers/shippers is a source of serious concern for the prospect of the Convention. This is more so when the risks of terrorist acts normally aimed at a few countries because of current international political situation are spread out to many innocent countries without quid pro quo.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.98
• /
• pp.104-129
• /
• 2020

Designated as a national treasure of Korea and inscribed on the UNESCO World Heritage List, the Tripitaka Koreana at Haeinsa Temple is the world's oldest and most comprehensive extant version of the Tripitaka in Hanja script (i.e., Chinese characters). The set consists of 81,352 carved woodblocks, some of which have two or more copies, which are known as "duplicate woodblocks." These duplicates are supplementary woodblocks (bogakpan) that were carved some time after the original production, likely to replace blocks that had been eroded or damaged by repeated printings. According to the most recent survey, the number of supplementary woodblocks is 118, or approximately 0.14% of the total set, which attests to the outstanding preservation of the original woodblocks. Research on the supplementary woodblocks can reveal important details about the preservation and management of the Tripitaka Koreana woodblocks. Most of the supplementary woodblocks were carved during the Joseon period (1392-1910) or Japanese colonial period (1910-1945). Although the details of the woodblocks from the Japanese colonial period have been recorded and organized to a certain extent, no such efforts have been made with regards to the woodblocks from the Joseon period. This paper analyzes the characteristics and production date of the supplementary woodblocks of the Tripitaka Koreana. The sutra with the most supplementary woodblocks is the Maha Prajnaparamita Sutra (Perfection of Transcendental Wisdom), often known as the Heart Sutra. In fact, 76 of the total 118 supplementary woodblocks (64.4%) are for this sutra. Hence, analyses of printed versions of the Maha Prajnaparamita Sutra should illuminate trends in the carving of supplementary woodblocks for the Tripitaka Koreana, including the representative characteristics of different periods. According to analysis of the 76 supplementary woodblocks of the Maha Prajnaparamita Sutra, 23 were carved during the Japanese colonial period: 12 in 1915 and 11 in 1937. The remaining 53 were carved during the Joseon period at three separate times. First, 14 of the woodblocks bear the inscription "carved in the mujin year by Haeji" ("戊辰年更刻海志"). Here, the "mujin year" is estimated to correspond to 1448, or the thirtieth year of the reign of King Sejong. On many of these 14 woodblocks, the name of the person who did the carving is engraved outside the border. One of these names is Seonggyeong, an artisan who is known to have been active in 1446, thus supporting the conclusion that the mujin year corresponds to 1448. The vertical length of these woodblocks (inside the border) is 21 cm, which is about 1 cm shorter than the original woodblocks. Some of these blocks were carved in the Zhao Mengfu script. Distinguishing features include the appearance of faint lines on some plates, and the rough finish of the bottoms. The second group of supplementary woodblocks was carved shortly after 1865, when the monks Namho Yeonggi and Haemyeong Jangung had two copies of the Tripitaka Koreana printed. At the time, some of the pages could not be printed because the original woodblocks were damaged. This is confirmed by the missing pages of the extant copy that is now preserved at Woljeongsa Temple. As a result, the supplementary woodblocks are estimated to have been produced immediately after the printing. Evidently, however, not all of the damaged woodblocks could be replaced at this time, as only six woodblocks (comprising eight pages) were carved. On the 1865 woodblocks, lines can be seen between the columns, no red paint was applied, and the prayers of patrons were also carved into the plates. The third carving of supplementary woodblocks occurred just before 1899, when the imperial court of the Korean Empire sponsored a new printing of the Tripitaka Koreana. Government officials who were dispatched to supervise the printing likely inspected the existing blocks and ordered supplementary woodblocks to be carved to replace those that were damaged. A total of 33 supplementary woodblocks (comprising 56 pages) were carved at this time, accounting for the largest number of supplementary woodblocks for the Maha Prajnaparamita Sutra. On the 1899 supplementary woodblocks, red paint was applied to each plate and one line was left blank at both ends.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.1-21
• /
• 2021

As the global business environment changes, uncertainties in technology development and market needs increase, and competition among companies intensifies, interests and demands for R&D activities of individual companies are increasing. In order to cope with these environmental changes, R&D companies are strengthening R&D investment as one of the means to enhance the qualitative competitiveness of R&D while paying more attention to facility investment. As a result, facilities or R&D investment elements are inevitably a burden for R&D companies to bear future uncertainties. It is true that the management strategy of increasing investment in R&D as a means of enhancing R&D capability is highly uncertain in terms of corporate performance. In this study, the structural factors that influence the R&D capabilities of companies are explored in terms of technology management capabilities, R&D capabilities, and corporate classification attributes by utilizing data mining techniques, and the characteristics these individual factors present according to the level of R&D capabilities are analyzed. This study also showed cluster analysis and experimental results based on evidence data for all domestic R&D companies, and is expected to provide important implications for corporate management strategies to enhance R&D capabilities of individual companies. For each of the three viewpoints, detailed evaluation indexes were composed of 7, 2, and 4, respectively, to quantitatively measure individual levels in the corresponding area. In the case of technology management capability and R&D capability, the sub-item evaluation indexes that are being used by current domestic technology evaluation agencies were referenced, and the final detailed evaluation index was newly constructed in consideration of whether data could be obtained quantitatively. In the case of corporate classification attributes, the most basic corporate classification profile information is considered. In particular, in order to grasp the homogeneity of the R&D competency level, a comprehensive score for each company was given using detailed evaluation indicators of technology management capability and R&D capability, and the competency level was classified into five grades and compared with the cluster analysis results. In order to give the meaning according to the comparative evaluation between the analyzed cluster and the competency level grade, the clusters with high and low trends in R&D competency level were searched for each cluster. Afterwards, characteristics according to detailed evaluation indicators were analyzed in the cluster. Through this method of conducting research, two groups with high R&D competency and one with low level of R&D competency were analyzed, and the remaining two clusters were similar with almost high incidence. As a result, in this study, individual characteristics according to detailed evaluation indexes were analyzed for two clusters with high competency level and one cluster with low competency level. The implications of the results of this study are that the faster the replacement cycle of professional managers who can effectively respond to changes in technology and market demand, the more likely they will contribute to enhancing R&D capabilities. In the case of a private company, it is necessary to increase the intensity of input of R&D capabilities by enhancing the sense of belonging of R&D personnel to the company through conversion to a corporate company, and to provide the accuracy of responsibility and authority through the organization of the team unit. Since the number of technical commercialization achievements and technology certifications are occurring both in the case of contributing to capacity improvement and in case of not, it was confirmed that there is a limit in reviewing it as an important factor for enhancing R&D capacity from the perspective of management. Lastly, the experience of utility model filing was identified as a factor that has an important influence on R&D capability, and it was confirmed the need to provide motivation to encourage utility model filings in order to enhance R&D capability. As such, the results of this study are expected to provide important implications for corporate management strategies to enhance individual companies' R&D capabilities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.1-40
• /
• 1973

There is a general tendency to increase nitrogen level in rice production to insure an increased yield. On the other hand, percentage of ripened grains is getting decreased with such an increased fertilizer level. Decreasing of the percentage is one of the important yield limiting factors. Especially the newly developed rice variety, 'Tongil' is characterized by a relatively low percentage of ripened grains as compared with the other leading varieties. Therefore, these studies were aimed to finding out of some measures for the improvement of ripening in rice. The studies had been carried out in the field and in the phytotron during the period of three years from 1970 to 1972 at the Crop Experiment Station in Suwon. The results obtained from the experiments could be summarized as follows: 1. The spikelet of Tongil was longer in length, more narrow in width, thinner in thickness, smaller in the volume of grains and lighter in grain weight than those of Jinheung. The specific gravity of grain was closely correlated with grain weight and the relationship with thickness, width and length was getting smaller in Jinheung. On the other hand, Tongil showed a different pattern from Jinheung. The relationship of the specific gravity with grain weight was the greatest and followed by that with the width, thickness and length, in order. 2. The distribution of grain weight selected by specific gravity was different from one variety to another. Most of grains of Jinheung were distributed over the specific gravity of 1.12 with its peak at 1.18, but many of grains of Tongil were distributed below 1.12 with its peak at 1.16. The brown/rough rice ratio was sharply declined below the specific gravity of 1.06 in Jinheung, but that of Tongil was not declined from the 1.20 to the 0.96. Accordingly, it seemed to be unfair to make the specific gravity criterion for ripened grains at 1.06 in the Tongil variety. 3. The increasing tendency of grain weight after flowering was different depending on varieties. Generally speaking, rice varieties originated from cold area showed a slow grain weight increase while Tongil was rapid except at lower temperature in late ripening stage. 4. In the late-tillered culms or weak culms, the number of spikelets was small and the percentage of ripened grains was low. Tongil produced more late-tillered culms and had a longer flowering duration especially at lower temperature, resulting in a lower percentage of ripened grains. 5. The leaf blade of Tongil was short, broad and errect, having light receiving status for photosynthesis was better. The photosynthetic activity of Tongil per unit leaf area was higher than that of Jinheung at higher temperature, but lower at lower temperature. 6. Tongil was highly resistant to lodging because of short culm length, and thick lower-internodes. Before flowering, Tongil had a relatively higher amount of sugars, phosphate, silicate, calcium, manganese and magnesium. 7. The number of spikelets of Tongil was much more than that of Jinheung. The negative correlation was observed between the number of spikelets and percentage of ripened grains in Jinheung, but no correlation was found in Tongil grown at higher temperature. Therefore, grain yield was increased with increased number of spikelets in Tongil. Anthesis was not occurred below 21$^{\circ}C$ in Tongil, so sterile spikelets were increased at lower temperature during flowering stage. 8. The root distribution of Jinheung was deeper than that of Tongil. The root activity of Tongil evaluated by $\alpha$-naphthylamine oxidation method, was higher than that of Jinheung at higher temperature, but lower at lower temperature. It is seemed to be related with discoloration of leaf blades. 9. Tongil had a better light receiving status for photosynthesis and a better productive structure with balance between photosynthesis and respiration, so it is seemed that tongil has more ideal plant type for getting of a higher grain yield as compared with Jinheung. 10. Solar radiation during the 10 days before to 30 days after flowering seemed enough for ripening in suwon, but the air temperature dropped down below 22$^{\circ}C$ beyond August 25. Therefore, it was believed that air temperature is one of ripening limiting factors in this case. 11. The optimum temperature for ripening in Jinheung was relatively lower than that of Tongil requriing more than $25^{\circ}C$. Air temperature below 21$^{\circ}C$ was one of limiting factors for ripening in Tongil. 12. It seemed that Jinheung has relatively high photosensitivity and moderate thermosensitivity, while Tongil has a low photosensitivity, high thermosensitivity and longer basic vegetative phase. 13. Under a condition of higher nitrogen application at late growing stage, the grain yield of Jinheung was increased with improvement of percentage of ripened grains, while grain yield of Tongil decreased due to decreasing the number of spikelets although photosynthetic activity after flowering was. increased. 14. The grain yield of Jinheung was decreased slightly in the late transplanting culture since its photosynthetic activity was relatively high at lower temperature, but that of Tonil was decreased due to its inactive photosynthetic activity at lower temperature. The highest yield of Tongil was obtained in the early transplanting culture. 15. Tongil was adapted to a higher fertilizer and dense transplanting, and the percentage of ripened grains was improved by shortening of the flowering duration with increased number of seedlings per hill. 16. The percentage of vigorous tillers was increased with a denser transplanting and increasing in number of seedlings per hill. 17. The possibility to improve percentage of ripened grains was shown with phosphate application at lower temperature. The above mentioned results are again summarized below. The Japonica type leading varieties should be flowered before August 20 to insure a satisfactory ripening of grains. Nitrogen applied should not be more than 7.5kg/10a as the basal-dressing and the remained nitrogen should be applied at the later growing stage to increase their photosynthetic activity. The morphological and physiological characteristics of Tongil, a semi-dwarf, Indica $\times$ Japonica hybrid variety, are very different from those of other leading rice varieties, requring changes in seed selection by specific gravity method, in milling and in the cultural practices. Considering the peculiar distribution of grains selected by the method and the brown/rough rice ratio, the specific gravity criterion for seed selection should be changed from the currently employed 1.06 to about 0.96 for Tongil. In milling process, it would be advisable to bear in mind the specific traits of Tongil grain appearance. Tongil is a variety with many weak tillers and under lower temperature condition flowering is delayed. Such characteristics result in inactivation of roots and leaf blades which affects substantially lowering of the percentage of ripened grains due to increased unfertilized spikelets. In addition, Tongil is adapted well to higher nitrogen application. Therefore, it would be recommended to transplant Tongil variety earlier in season under the condition of higer nitrogen, phosphate and silicate. A dense planting-space with three vigorous seedlings per hill should be practiced in this case. In order to manifest fully the capability of Tongil, several aspects such as the varietal improvement, culural practices and milling process should be more intensively considered in the future.he future.