• 소성∙가공
• /
• 제15권2호
• /
• pp.118-125
• /
• 2006

API steel is used for line-pipe to transport the oil and natural gas. As the recent trends in the development of API steel are towards the use of larger diameter and thicker plate, many researches have been studied to achieve higher strength, higher toughness and lower yield ratio in API steel. However, the strength of API steel after pipe forming is changed depending on the competition of the Bauschinger effect and work hardening which are affected by the strain history during pipe forming process. So, the purpose of this study is to investigate the influence of microstructure on the Bauschinger effect for API steel. To change the microstructure of API steel we have changed the hot rolling condition and the amounts of V and Cu addition. The compression-tensile test and the microstructure observation by OM and TEM were conducted to investigate the yield strength drop and the correlation between the Bauschinger effect and microstructure of API steel. The experimental results show that the increase of polygonal ferrites volume fraction increases the Baushcinger effect due to the back stress which comes from the increase of mobile dislocation density at polygonal ferrite interior during the compressive deformation. The hot rolling condition was more effective on the Bauschinger effect in API steel than the small amount of V and Cu addition.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.336-339
• /
• 2005

API steel is used for line-pipe to transport the oil and natural gas. As the recent trends in the development of API steel are towards the use of larger diameter and thicker plate, many researches have been studied to achieve higher strength, higher toughness and lower yield ratio in API steel. However, the strength of API steel after pipe forming is changed depend on the competition of the Bauschinger effect and work hardening. So, the purpose of this study is to investigate the influence on the Bauschinger effect for API steel by addition of V and Cu which are formed the precipitations for higher strength in API steel. The results are that the addition of V considered as a ferrite stabilizer and Cu considered as a austenite stabilizer decreases and increases the Bauschinger effect for API steel respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.313-316
• /
• 2005

In the present study, Bauschinger effect was investigated for the micro-alloying forging steel which has been developed for about 30 years ago to save energy consumption by eliminating the heat treatment processes in the forging industry. The micro-alloying steels used fur cold forging industry mainly aim to replace the usual carbon steel. With the conventional carbon steels, all the deformation history can be eliminated after the final heat treatment(quenching and tempering). In the case of micro-alloying forging steels, however, the prior deformation history should be taken into consideration to meet the mechanical property requirement since the microstructure of micro-alloying steels might exhibit the Bauschinger effect, which was not needed to consider in the case of conventional carbon steel having quenching and tempering treatment. In the present study, the reverse loading tests were carried out to determine the Bauschinger effect of micro-alloying steel which composed of ferrite and cementite phases.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.22-33
• /
• 1998

A continuum analysis of the evolution of plasticity and Bauschinger effect in a short fiber reinforced metal matrix composite, based on the FEM solution for a single fiber model has been performed to investigate the strengthening behavior. The evolution of matrix field quantities during one cycle of fully reversed loading have been examined in detail. The results indicate that the role of constrained matrix flow in generating different levels of matrix triaxiality during forward and reversed loading provides an important contribution to the developement of the Bauschinger effect in the metal matrix composite. Therefore, even when the plastic flow of the matrix material follows on isotropic hardening behavior, the Bauschinger effect is predicted for the composite material.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.326-329
• /
• 2005

Since the required strength of forged part is achieved by work hardening with the accumulation of plastic strain during the cold working, severe load can be exerted on die system. So, dies are liable to the early fracture for the non-heat treated steel forging in comparison with the conventional mild steels. Therefore, it is necessary to lower the flow stress of steels as much as possible during forging steps. Bauschinger effect can be utilized to lower flow stress during forging steps by giving the tensile prestrain on the forging billet during wire drawing step. In the present study, the prestrain effect on Bauschinger phenomenon is studied to avoid difficulties with application of non-heat treated cold forging steels in practice.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.477-483
• /
• 2003

An independent kinematic hardening material model in which the reverse yielding point is defined by the Bauschinger effect factor (BEF) , has been defined for stainless steel SUS 304. The material model and the BEF are obtained experimentally and represented mathematically as continuous functions of effective plastic strain. The material model has been incorporated in a non-linear stress analysis for the prediction of reverse yielding in thick-walled cylinders during the autofrettage process of these vessels. Residual stress distributions of the independent kinematic hardening material model at the onset of reverse yielding are compared with residual stresses of an isotropic hardening model showing the significant effect of the BEF on reverse yielding predictions. Critical pressures of direct and reverse yielding are obtained for the most commonly used cylinders and a range of permissible internal pressures for an efficient autofrettaged process is recommended.

• 한국정밀공학회지
• /
• 제26권12호
• /
• pp.110-116
• /
• 2009

Thick-walled cylinders, such as a cannon or nuclear reactor, are autofrettaged to induce advantageous residual stresses into pressure vessels and to increase operating pressure and the fatigue lifetimes. As the autofrettage level increases, the magnitude of compressive residual stress at the bore also increases. However, the Bauschinger effect reduces the compressive residual stresses as a result of prior tensile plastic strain, and decreases the beneficial autofrettage effect. The purpose of the present paper is to predict the accurate residual stress of SNCM8 high strength steel using the Kendall model which was adopted by ASME Code. The uniaxial Bauschinger effect test was performed to decide BEF, then this constant was used in calculation. There were some differences between theoretical solution and modified solution.

• 대한기계학회논문집A
• /
• 제37권10호
• /
• pp.1239-1249
• /
• 2013

본 연구에서는 zircaloy-4 판재에 대해 바우싱거 효과를 고려한 경화거동 예측모델을 구축했다. 금속소재 가공에서 인장 후 압축 시 항복응력이 감소한다. 이에 스프링백 해석 시 바우싱거 효과를 반드시 고려해야 한다. Simple shear 시험에서 적정 시편크기 및 적정 조임토크에 대한 결정법을 제시했다. 5 가지 재료에 대한 simple shear 시험을 통해 응력-변형률 곡선을 구했다. 또한 유한요소해석을 활용해 simple shear 하중-변위 곡선으로부터 유효응력-변형률 곡선으로 변환과정을 소개했다. 등방/운동성 경화 조합모델을 활용해 simple shear 순/역방향 시험을 모사했다. 이때 각 경화계수에 따른 하중-변위 곡선 변화를 관찰하고, zircaloy-4에 대한 경화계수를 결정했다.

• 한국추진공학회지
• /
• 제12권4호
• /
• pp.7-15
• /
• 2008

항공기 제작 시 중요한 요소는 항공기 구조의 안전성과 경량화라 할 수 있다. 자긴가공 공정을 통하여 고압의 항공기 부품을 신뢰성 증대와 함께 재료의 경량화도 같이 얻을 수 있다. 이 방법은 주로 단일 실린더에 적용되었다. 그러나 바우싱거 효과에 의하여 자긴가공의 유용함이 줄어든다. 바우싱거 효과를 줄이기 위한 억지 끼워맞춤과 자긴가공을 이용한 복합실린더에 대한 관심이 증대하고 있다. 본 연구에서 동일한 치수를 가진 단일 및 복합실린더를 고려하였다. 복합실린더에서 억지 끼워맞춤에 의하여 경계면에서 낮은 압축 잔류응력이 유도되며, 내경에서 보다 낮은 소성 변형률이 유도된다. 이는 바우싱거 효과를 줄여, 내경에서 더욱 유용한 잔류응력을 얻을 수 있음을 의미한다.

• 소성∙가공
• /
• 제13권1호
• /
• pp.15-20
• /
• 2004

본 연구에서는 자동차용 판재 성형시 발생하는 스프링백을 정확히 예측하기 위하여, 수정된Chaboche형에 기초한 혼합형 등방-이동경화규칙이 개발되었다. 또한 판재의 이방성을 위하여 최근 개발된 Barlat의 YId2000-24 비이차 비이방성 항복 함수가 이용되었다. 단순인장실험과 인장/압축(압축/인장) 실험에 의하여 Bauschinger 및 transient 거동과 비이방성이 측정되었으며, 유한요소해석에 의한 구성방정식의 검증을 위해 실제 자동차 부품을 부분 변형시킨 double S-rail이 제작되었다. 수정된 Chaboche 형 조성방정식과 비등방 항복함수를 적용한 유한요소에 의한 수치해석의 결과는 굽힘에 의한 스프링백과 비틀림에 있어서 실험과 잘 일치함을 알 수 있었다.