• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.1
• /
• pp.110-120
• /
• 2008

Gridded bathymetric data of 30 seconds apart in Korea marginal seas $(30^{\circ}N{\sim}44^{\circ}N,\;117^{\circ}E{\sim}143^{\circ}E)$ are produced. In order to make the data, both updated gridded data of 1 minute apart on internet sites and all the digital nautical charts issued by National Oceanographic Research Institute (NORI) in Oct. 2007 are used. The reference level of the gridded data is approximate level of lowest low water and the horizontal coordinates are based on the WGS84 ellipsoid. Especially a developed computer program can collect all the sounding data including depth contour directly from the digital charts and UTM coordinates of the data are converted to the WGS84 coordinates from which accuracy of data is significantly improved. An interpolation method is adopted to produce the gridded data which are compared and analyzed against the existing gridded data. In this gridded data we can see significantly detailed topographic features which could not be found in the previous data.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.286-290
• /
• 2011

This paper introduces the optimum macro-siting of a potential site for an offshore wind farm around Jeju Island using the RDAPS sea wind model. The statistical model was developed by analyzing the sea wind data from RDAPS model, and the meso-scale digital wind map was prepared. To develop the high resolution spatial calibration model, Artificial Neural Network(ANN) models were used to construct the wind and bathymetric maps. Accuracy and consistency of wind/bathymetric spatial calibration models were obtained using analysis of variance. The optimization problem was defined to maximize the energy density satisfying the criteria of maximum water depth and maximum distance from the coastline. The candidate site was selected through Genetic Algorithm(GA). From the results, it is possible to predict roughly a candidate site location for the installation of the offshore wind jam, and to evaluate the wind resources of the proposed site.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.70-77
• /
• 2015

This paper proposes an application of unscented Kalman filter(UKF) for localization of an underwater robot. The method compares the bathymetric measurement from the robot with the seabed terrain information. For the measurement of bathymetric range to seabed, it uses a DVL which typically yields four range data together with velocity of the robot. Usual extended Kalman filter is not appropriated for application in case of terrain navigation, since it is not feasible to derive Jacobian for the bathymetric range measurement. Though particle filter(PF) is a nice solution which doesn't require Jacobian and can deal with non-linear and non-Gaussian system and measurement, it suffers from heavy computational burden. The paper compares the localization performance and the computation time of the UKF approach and PF approach. Though there have been some UKF methods which are used for underwater navigation, application of the UKF for bathymetric localization is rare. Especially, the proposed method uses only four range data whereas many of the bathymetric navigation methods have used multibeam sonar which yields hundreds of scanned range data. The result shows feasibility of the UKF approach for terrain-based navigation using small numbers of range data.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1527-1539
• /
• 2022

As coastal erosion of the east coast is accelerating, the need for scientific and quantitative coastal erosion monitoring technology for a wide area increases. The traditional method for observing changes in the coast was precision monitoring based on field surveys, but it can only be applied to a small area. The airborne bathymetric Light Detection And Ranging (LiDAR) system is a technology that enables economical surveying of coastal and seabed topography in a wide area. In particular, it has the advantage of constructing topographical data for the intertidal zone, which is a major area of interest for coastal erosion monitoring. In this study, time series analysis of coastal seabed topography acquired in Aug, 2021 and Mar. 2022 on the littoral cell GW36 in Gangwon was performed using the Seahawk Airborne Bathymetric LiDAR (ABL) system. We quantitatively monitored the topographical changes by measuring the baseline length, shoreline and Digital Terrain Model (DTM) changes. Through this, the effectiveness of the ABL surveying technique was confirmed in coastal erosion monitoring.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1709-1718
• /
• 2021

The waveform data of the Airborne Bathymetric LiDAR (ABL; LiDAR: Light Detection And Ranging) system provides data with improved accuracy, resolution, and reliability compared to the discrete-return data, and increases the user's control over data processing. Furthermore, we are able to extract additional information about the return signal. Waveform decomposition is a technique that separates each echo from the received waveform with a mixture of water surface and seabed reflections, waterbody backscattering, and various noises. In this study, a new waveform decomposition technique based on a Gaussian model was developed to improve the point extraction performance from the ABL waveform data. In the existing waveform decomposition techniques, the number of decomposed echoes and decomposition performance depend on the peak detection results because they use waveform peaks as initial values. However, in the study, we improved the approximation accuracy of the decomposition model by adding the estimated potential peak candidates to the initial peaks. As a result of an experiment using waveform data obtained from the East Coast from the Seahawk system, the precision of the decomposition model was improved by about 37% based on evaluating RMSE compared to the Gaussian decomposition method.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.4
• /
• pp.221-233
• /
• 2016

This paper deals with performance assessment of the kinematic network-based GPS positioning technique with a view to using it for ellipsoidally referenced bathymetric surveys. To this end, two field trials were carried out on a land vehicle and a surveying vessel. Single-frequency GPS data acquired from these tests were processed by an in-house software which equips the network modeling algorithm with instantaneous ambiguity resolution procedure. The results reveals that ambiguity success rate based on the network model is mostly higher than 99.0%, which is superior to that of the single-baseline model. In addition, achievable accuracy of the technique was accessed at ${\pm}1.6cm$ and 2.7 cm with 95% confidence level in horizontal and vertical component respectively. From bathymetric survey at the West Nakdong River in Busan, Korea, 3-D coordinates of 2,011 points on its bed were computed by using GPS-derived coordinates, attitude, measured depth and geoid undulation. Note that their vertical coordinates are aligned to the geoid, the so-called orthometric height which is widely adopted in river engineering. Bathymetry was constructed by interpolating the coordinate set, and some discussion on its benefit was given at the end.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.461-473
• /
• 2015

Jinhae Bay located in the southern of Korean Peninsular is an important spawning area in Korea. By some preliminary studies it was measured several times that adult Pacific codes (Gadus microcephalus) were passed (swimming layer: 15 to 18 m) over a submerged sea tunnel (sea bottom: about 30 m) rather than another immigration route when the Pacific codes were tagged surgically with an acoustic transmitters and released inside of the Bay. There is a possibility that the Pacific codes and the other fishes use the route on the sea tunnel as an immigration route are affected by a human-generated underwater noise around the sea tunnel due to the sea tunnel traffic. On this study the 25-hour measurements of the underwater noise level by water layer were conducted with a hydrophone attached on a portable CTD and an underwater noise level meter during four seasons, and the acoustical characteristics of the underwater noise was analyzed. The mean traffic volume for one hour at the sea tunnel on the spring was shown the largest value of 1,408 [standard deviation (SD): 855] vehicles among four seasons measurement. The next one was ordered on the autumn [1,145 (SD: 764)], winter [947 (SD: 598)] and summer [931 (SD: 558)] vehicles. Small size vehicle was formed 84.3% of the traffic volume, and ultra-small size, medium size, large size and extra-large size of the vehicle were taken possession of 8.7%, 3.2%, 2.0% and 1.8%, respectively. On the daily change of the noise level in vertical during four seasons the noise level of 5 m-layer was shown the highest value of 121.2 (SD: 3.6) dB (re $1{\mu}Pa$), the next one was 10 m-layer [120.7 (SD: 3.5)], 2 m- and 15 m-layer [120.3 (SD: 3.5 to 3.7)] and 1 m-layer [119.2 (SD: 3.6)] dB (re $1{\mu}Pa$). In relation with the seasonal change of the noise level the average noise level measured during autumn was shown the highest value of 123.9 (SD: 2.6) dB (re $1{\mu}Pa$), the next was during summer [121.4 (SD: 3.2)], spring [118.0 (SD: 3.4)] and winter [116.5 (SD: 5.1)] dB (re $1{\mu}Pa$). In results of eigenray computation when the real bathymetry data (complicate shape of sea bed) was applied the average number of eigenray was 2.68 times (eigenrays: 11.03 rays) higher than those of model bathymetry (flat and slightly sloped sea bottom). When the real bathymetric data toward inside (water depth becomes shallow according to a distance between the source of noise and hydrophone) of the Bay was applied on the eigenrays calculation the number of the eigenray was 1.31 times (eigenrays: 12.49 rays) larger than the real bathymetric data toward outside (water depth becomes deep with respect to the distance). But when the model bathymetric data toward inside of the Bay was applied the number of the eigenray was 1.05 times (eigenrays: 4.21 rays) larger than the model bathymetric data toward outside.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.4
• /
• pp.235-243
• /
• 2021

River surveying is conducted to acquire basic geographic data for river master plans and various river maintenance, and it is also used to predict changes after river maintenance construction. ABL (Airborne Bathymetric LiDAR) system is a cutting-edge surveying technology that can simultaneously observe the water surface and river bed using a green laser, and has many advantages in river surveying. In order to use the ABL data for river surveying, it is prerequisite step to segment and extract the water surface and river bed points from the original point cloud data. In this study, point cloud segmentation was performed by applying the ground filtering technique, ATIN (Adaptive Triangular Irregular Network) to the ABL data and then, the water surface and riverbed point clouds were extracted sequentially. In the Gokgyocheon river area, Chungcheongnam-do, the experiment was conducted with the dataset obtained using the Leica Chiroptera 4X sensor. As a result of the study, the overall classification accuracy for the water surface and riverbed was 88.8%, and the Kappa coefficient was 0.825, confirming that the ABL data can be effectively used for river surveying.

• Journal of the Korean earth science society
• /
• v.26 no.8
• /
• pp.836-843
• /
• 2005

Two data sets of repeated hydrographic surveys with a single beam echo-sounder were obtained to investigate morphological changes on a sand mining site within EEZ near the Eocheong Islands, West Sea of Korea. Their accuracies of depth measurement, estimated from the crossover analysis, correspond to the Oder 2 of IHO standards. Bathymetric maps show a feature of 300m wide and 10m deep hollow, whose evolution can be seen in difference grids of the two bathymetric maps. However, data of higher accuracy and resolution enable precise quantification of extracted sand volume. Since this morphological change could affect sedimentary environment as well as benthic ecology, environmental impact assessment based on scientific research data is required for management and sustainable development of limited sand resource.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.525-528
• /
• 2006

The remote sensing data can be used to calculate the water depth especially in the clear and shallow water area. In this study, the SPOT data was used for bathymetric mapping in Dong-Sha atoll, located in northern South China Sea. The in situ sea depth was collected by echo sounder as well. A global positioning system was employed to locate the accurate sampling points for sea depth. An empirical model between measurement sea depth and band digital count was determined and based on least squares regression analysis. Both non-classification and unsupervised classification were used in this study. The results show that the standard error is less than 0.9m for non-classification. Besides, the 10% error related to the measurement water depth can be satisfied for more than 85% in situ data points. Otherwise, the 10% relative error can reach more than 97%, 69%, and 51% data points at class 4, 5, and 6 respectively if supervised classification is applied. Meanwhile, we also find that the unsupervised classification can get more accuracy to estimate water depth with standard error less than 0.63, 0.93, and 0.68m at class 4, 5, and 6 respectively.