• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.4
• /
• pp.23-29
• /
• 2000

We demonstrate the fabrication method of high-density and high-quality solder bump solving a copper (Cu) cross-contamination in Si-LSI laboratory. The Cu cross-contamination is solved by separating solder-bump process by two steps. Former is via-formation process excluding Cu/Ti under ball metallurgy (UBM) layer sputtering in Si-LSI laboratory. Latter is electroplating process including Ti-adhesion and Cu-seed layers sputtering out of Si-LSI laboratory. Thick photoresist (PR) is achieved by a multiple coating method. After TiW/Al-electrode sputtering for electroplating and via formation in Si-LSI laboratory, Cu/Ti UBM layer is sputtered on sample. The Cu-seed layer on the PR is etched during Cu-electroplating with low-electroplating rate due to a difference in resistance of UBM layer between via bottom and PR. Therefore Cu-buffer layer can be electroplated selectively at the via bottom. After etching the Ti-adhesion layer on the PR, Sn/Pb solder layer with a composition of 60/40 is electroplated using a tin-lead electroplating bath with a metal stoichiometry of 60/40 (weight percent ratio). Scanning electron microscope image shows that the fabricated solder bump is high-uniformity and high-quality as well as symmetric mushroom shape. The solder bumps with even 40/60 $\mu\textrm{m}$ in diameter/pitch do not touch during electroplating and reflow procedures. The solder-bump process of high-uniformity and high-density with the Cu cross-contamination free in Si-LSI laboratory will be effective for electronic microwave application.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.22-29
• /
• 2014

Recycling process of iron should be developed for efficient recovery of neodymium (Nd), rare metal, from acid-leaching solution of Nd magnet. In this study, $FeCl_3$ solution as iron source was used for preparation of iron nano particles with the condition of various factors, such as, reductant, and surfactant. $Na_4P_2O_7$ and Polyvinylpyrrolidone (PVP) as surfactants, $NaBH_4$ as reductant, and palladium chloride ($PdCl_2$) as a nucleation seed were used. Iron powder was analyzed by using XRD, SEM for measuring shape and size. Iron nano particles were prepared at the ratio of 1:5 (Fe (III) : $NaBH_4$). Size and shape of iron particles were round-form and 50 ~ 100 nm size. Zeta-potential of iron at the 100 mg/L of $Na_4P_2O_7$ was negative value, which was good for dispersion of metal particle. When $Na_4P_2O_7$ (100 mg/L), PVP($FeCl_3:PVP$ = 1 : 4, w/w) and Pd($FeCl_3:PdCl_2$ = 1 : 0.001, w/w) were used, iron nano particles which were round-shape, well-dispersed and near 100 nm-sized range. In this condition, $FeCl_3$ solution changed with spent Nd leachate solution, and then it is possible to be made round-formed iron nano particles at pH 9 and at the reaction bath over 20 L which is not include any surfactant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.24-25
• /
• 2006

SmBCO coated conductors were successfully fabricated using EDDC (Evaporation using Drum in Dual Chambers) deposition system that is a bath type co-evaporation system for fabrication of superconducting tape and divided into two chambers named evaporation chamber and reaction chamber. To obtain long and high quality superconducting coated conductor, it is very important to secure the uniformity of all the deposition parameters m the deposition system such as deposition temperature, oxygen partial pressure, compositional ratios and so on. Therefore, we investigated the distribution of the parameters along the axis of the drum m EDDC on which tapes were wound helically. When the temperature on the middle point of deposition zone was $700^{\circ}C$, that on the edge of deposition zone was $675^{\circ}C$. When the thickness of SmBCO layer on the middle point of deposition zone was 1063 nm, that on the edge of deposition zone was 899 nm. The partial pressure of oxygen was 5 mTorr in the reaction chamber while that was $7{\times}10^{-5}$Torr in the evaporation chamber. The composition ratio of Sm:Ba:Cu, that was measured by EDX, was very uniform along the axis of the drum. Under these deposition conditions, critical current distribution along the drum axis was 175 A/cm, 190A/cm, 217.5 A/cm, 182.5 A/cm, 175 A/cm with the interval of 9 cm between samples. It means that the EDDC system has the potential of fabricating (100m, 200A) class coated conductor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.527-533
• /
• 2017

As the clothing industry has advanced, dyeing technologies using various dyes have been developed. In recent years, interest in natural pigments has been increasing because of the negative impact of synthetic pigment on human health; therefore, development and application of microbial pigments is demanded. In this study, the dyeing effects on multifiber fabrics and biological activity were assessed using violet natural pigment from the marine bacterium, Microbulbifer sp. PPB12. The violet pigment produced by cultivation of Microbulbifer sp. PPB12 using Marine broth 2216 for 3 days was extracted using ethanol. Once dissolved in 20% ethanol, the violet pigment could be used to dye bleached cotton, diacetate, and especially polyamide. The optimal temperature, time, pH, and bath ratio under the dyeing conditions were $80^{\circ}C-90^{\circ}C$, more than 1 hour, pH 4-6, and 1:25, respectively. The mordant treatment was more suitable for color expression when $Na_2SO_4$ was used after 10 minutes of dyeing, but no significant difference was observed from untreated samples. The violet pigment also showed antibacterial activity against B. subtilis. The results of the present study indicate that the marine bacterial pigment could be an alternative for textile dyeing as a natural dye with antibacterial activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.525-531
• /
• 2018

This paper proposes a bi-component dye, including the unripe fruit of Diospyros kaki THUNB and Ecklonia cava, to substitute for traditional persimmon dyeing because fabrics dyed with persimmon juice become stiffer and natural persimmon is insufficient for dyeing. This study examined the color difference and fabric stiffness depending on the ratio of Ecklonia cava for in a one-bath dye solution with Diospyros kaki THUNB and showed that 6% of Ecklonia cava in the bi-component dye was the optimum for decreasing the fabric stiffness. Based on these results, a bi-component dye constituting of 94% Diospyros kaki THUNB and 6% Ecklonia cava was prepared. The particle size was found to be smaller than both single dyes and it maintained a similar amount of Catechin to Diospyros kaki THUNB dye. Finally, cotton fabric dyed with a bi-component dye was much improved in terms of the fabric hand and the surface color was similar to that of the traditional persimmon-dyed fabric. These results could help to develop the natural persimmon dyeing industry.

• YAKHAK HOEJI
• /
• v.44 no.3
• /
• pp.224-231
• /
• 2000

$Nokyangbotang^{TM}$ (NYBT) is a kind of powerful food for health and have been drunk at a oral dose of 80 ml (99.5 mg) three times per day: It has not been well studied about the anti-fatigue and hepatoprotective activity. In this experiments, we evaluated pathophysiologically the effect of NYBT on swimming time in mouse and hepatoprotective activity in rats intoxicated with carbon-tetrachloride. NYBT was nontoxic in orally acute toxicity test ($LD_{50}$, 320 ml/60 kg): a nontoxic food in more four times of one-shoot dosage (80 ml) to human. Weight-loaded forced swimming test was carried out to measure the swimming time of mice with a 4% load of body weight in plastic cylinder (diameter $10{\;}cm{\;}{\times}{\;}height{\;}20{\;}cm$) on water bath at $25^{\circ}C$, and the anti-fatigue activity represented the ratio of swimming time of experimental group to that of control group. NYBT had dose-dependent anti-fatigue activity Mice administered NYBT at a dose of 320 ml/60 kg once daily for 5 days could swim about two times more than control. Hepatoprotective activities of NYBT were examined by the determination of malonedialdehyde (MDA) and pathological survey in liver and liver function test of rat intoxicated with $CCl_4$ at i.m. dose of 2 ml/kg once daily for 7days. NYBT decreased dose-dependently thiobarbituric acid reactive substance: Oral administration of NYBT at a dose of 20 ml/60 kg was $38.51{\;}{\pm}{\;}3.02$ nmol MDA/g of tissue, that of 80 ml/60 kg was $33.76{\;}{\pm}{\;} 1.84$ nmol MDA/g of tissue, and that of 320 ml/60 kg was $32.87{\;}{\pm}{\;}1.90$ nmol MDA/g of tissue as compared with control group ($43.61{\;}{\pm}{\;}2.85$ nmol MDA/g of tissue). All rats administered NYBT at a dose of 320 ml/60 kg were survival as compared with 40% survival of control animals, and GPT activity of rats administered NYBT at a dose of 80 ml/60 kg was decreased as compared with control. In histopathological survey, NYBT improved slightly the fatty changes of hepatocytes around centrilobular area. These results suggest that NYBT has anti-fatigue and hepatoprotective activity in rats and mice.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.649-656
• /
• 2002

In situ patterned zinc oxide thin films were prepared by precipitation of Zn(NO$_3$)$_2$ aqueous solution containing urea and by microcontact printing using Self-Assembled Monolayers(SAMs) on A1/SiO$_2$/Si substrates. The visible precipitation of Zn(OH)$_2$ that was formed in the Zn(NO$_3$)$_2$ aqueous solution containing urea was enhanced with an increase of the reaction temperature and the amount of urea. As the reaction time of Zn(NO$_3$)$_2$ with urea was prolonged, the thickness and grain size of Zn(OH)$_2$ thin layers were increased, respectively. The optimum precipitation condition was at 80$\^{C}$ for 1 h for the solution with the ratio of Zn(NO$_3$)$_2$ to urea of 1 : 8. Homogeneous ZnO thin films were fabricated by the heat treatment of 600$\^{C}$ for 1 h of Zn(OH)$_2$ precipitation on Al/SiO$_2$/Si substrate. This was available to the in-situ patterned ZnO thin films with uniform grain size. Hydrophobic SAM, Octadecylphosphonic Acid(OPA) and hydrophilic SAM, 2-Carboxyethylphosphonic Acid(CPA) were applied on the Al/SiO$_2$/Si substrate by microcontact printing method. In situ patterned ZnO thin film was successfully prepared by the heat treatment of Zn(OH)$_2$ precipitated on the surface of hydrophilic SAM, CPA.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1420-1426
• /
• 2006

To establish a rapid and effective method for the analysis of soy isoflavone which is known to have lots of variation in derivatives of glucoside, conversion rate from isoflavone conjugates to its aglycones, and decomposition of conversed aglycones were investigated with various acid hydrolysis conditions. A number of heating conditions for acid hydrolysis including heating at convection oven $(105^{\circ}C)$, water bath $(95^{\circ}C)$, heating block $(120^{\circ}C)$, and hot plate $(120^{\circ}C)$ were applied. Acid hydrolysis in heating block with reflux was chosen as the best heating condition. From the stability test of isoflavone aglycone during acid hydrolysis, genistein, daidzein, and glycitein did not show any significant changes in their contents for 60 min of hydrolysis. Ten to thirty milligram of sample per 1 mL HCl was the best ratio of sample to acid. As conclusion, acid hydrolysis for 60 min after addition of 15 mL HCl solution to 0.5 g soybean, and then fill up to 50 mL with methanol, followed by HPLC analysis was set as a final analysis method. From this method, isoflavone contents expressed as total aglycone of feed meal was the highest with content of $1288.5{\mu}g/g$ followed by those of dehulled meal.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.310-316
• /
• 2009

The degradation characteristics of cross-linked lactide/hyaluronic acid (LA/HA) membranes were investigated for purpose of applying to tissue engineering. The lactide/hyaluronic acid cross-linked with 1,3-butadiene diepoxide (BD) and 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC) was degradated in deionized water in water bath at $37^{\circ}C$. As the LA/HA mole ratio or crosslinking agent concentration decreased, the degradation rate of the crosslinked membranes increased. In order to investigate the structure change of the membrane in the degradation process, the control sample and 3, 6, 9 days-degradated samples were analysed by the nuclear magnetic resonance spectroscopy. In case of the membranes crosslinked with EDC, the HA-EDC bonding structure was degradated slowly whereas the HA-LA bonding structure was degradated quickly and dissappeared completely after 6 days. In case of the membranes crosslinked with BD, all the crosslinked bonding structure degradated slowly. The HA-BD bonding structure maintained its original state about 89, 83% in case of 3, 6 days-degardated samples respectively whereas the HA-LA bonding structure maintained its original state about 83, 65%. The scanning electron microscopy of the degradated membranes showed that the pore density in the surface, and the structure in the surface and cross section, of the before and after-degradation membranes did not change greatly, so the membranes was shown to be applied to materials for tissue engineering.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.4
• /
• pp.479-485
• /
• 2009

The acidolysis was performed to produce structured lipid with palm mid fraction (PMF) and stearic acid for 7, 24, and 36 hr at $70^{\circ}C$. The reaction was catalyzed by lipozyme TLIM (immobilized lipase from Thermonyces lanuginosa, amount of 10% and 20% by weight of total substrates) in the shaking water bath. The reaction conditions for maximum incorporation of stearic acid on the structured lipid were obtained when molar ratio of PMF and stearic acid was 1:2; concentration of lipozyme TLIM was 20wt%; reaction temperature was $70^{\circ}C$; and reaction time was 36 hr. After reaction under this condition, incorporation of stearic acid in the structured lipid was obtained up to 36.3% while the major components of triacylglycerol were 1,2-dipalmitoyl-3-stearoylglycerol (PPS, 28.19 area%), 1-palmitoyl-2-oleoyl-3-stearoylglycerol (POS/PSO, 20.70 area%) and 1-palmitoyl-2,3-distearoylglycerol (PSS, 18.13 area%). However, the fatty acid composition at the sn-2 position suggested that the positional specificity of lipozyme TLIM was not observed due to the acyl migration.