• 한국표면공학회지
• /
• 제35권4호
• /
• pp.232-240
• /
• 2002

The composition and the microstructure of the Zn-Cr alloys electroplated in chloride bath with EDTA were studied according to electrolysis conditions. The cathode current efficiency decreased with increasing both Cr/(Cr+Zn) ratio and current density. The Cr content of the alloy deposits increased with Cr/(Cr+Zn) ratio and current density The phase structure of Zn-Cr alloy deposits changed from η-Zn through η-Zn+${\gamma}$'-ZnCr to ${\gamma}$'-ZnCr with increasing Cr content of alloys. The surface morphology of Zn-Cr alloy deposits changed from fine needle shaped crystallites through the mixed structure of needle-shaped and granular one to the colony structure with fine granular crystallites according to the change of phase structure

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.83-84
• /
• 2016

For the slip resistance test of shower room floor, the "O-Y Pull Slip Meter method (O-Y·PSM)" regulated under KS M 3510. This test method uses cooking oil as a substitute of soapy water, and thus it does not reflect the real condition. In this study, on 10 types of floor material samples, the Coefficient of Slip Resistance Bath (CSR·B) on bare foot between 10 types of body wash solution and 6 types of SDS solution was compared. The body wash solution is a mixture of soap and water in 1:20 ratio. As a result, SDS 0.1% solution was the most suitable for a substitute of soapy water in shower.

• 한국표면공학회지
• /
• 제16권4호
• /
• pp.188-194
• /
• 1983

The method of trivalent chromium plating has been studied. The relations between the mixing ratio of chromic chloride and DMF, and the corrosion resistance and throwing power of plated chromium have been investigated. As a result, the best result has been obtained, when the mole ratio of chromic chloride and DMF are 0.8 and 5.4M respectively, and it has been learned that the amounts of DMF added have particularly the delicate effects in chromium plating procedures. The results of measuring of pH and reduction potentials of chromium plating bath with addition of DMF showed that the functions of DMF have both the buffer actions for the solution and the complex formation of trivalent chromium.

• 공업화학
• /
• 제23권4호
• /
• pp.377-382
• /
• 2012

CIGS 화합물 반도체 태양전지에서 광흡수층과 상부투명전극 간의 격자부정합을 낮추기 위해 buffer layer로써 CdS 박막이 적용된다. 높은 광투과도와 낮은 비저항을 갖는 CdS 박막을 제조하기 위하여 화학적 용액 증착법에 의해 반응용액 내의 S 용액의 농도를 고정하고 Cd 용액의 농도를 변화시켜 CdS 박막을 제조하여 특성을 조사하였다. $[S^{2-}]/[Cd^{2+}]$ 농도비에 따른 박막의 구조적, 광학적 및 전기적 특성을 조사하였다. Cd의 농도가 S의 농도보다 높을 경우에는 균일반응이 촉진되어 CdS 결정들이 클러스터 형태로 기판에 흡착되어 결정 크기가 증가하고 광투과율이 감소하였다. 반면, Cd의 농도가 S의 농도보다 낮을 경우에는 용액 내에서 보다 기판위에서 CdS 결정입자가 생성되는 불균일반응에 의해 결정이 생성 및 성장되었고 수백 옹스트롱의 작고 균일한 구형 입자가 생성되었다. Cd 농도가 증가할수록 과잉 Cd가 증가하여 S 공극 생성으로 $[S^{2-}]/[Cd^{2+}]$ 조성비는 감소하였고 CdS 박막의 전하 농도가 증가되어 비저항이 감소되었다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.55-55
• /
• 2012

To improve the deodorizing and antibacterial performance of various fabrics (cotton, silk and wool) dyed with pomegranate(Punica granatum L.) extract without mordants, natural colorant solutions, which were extracted from pomegranate using water as an extractant at $90^{\circ}C$ for 90 min with a various liquor ratio (solid natural colorant material/solvent water, weight ratio) from 1:100 to 1:5 were used. To achieve the highest K/S and the deodorizing and antibacterial performance, the best liquor ratio, dyeing bath ratio, dyeing temperature and dyeing time were found to be 1:10, 1:50, $80^{\circ}C$ and 60 min, respectively. The deodorizing performance of dyed cotton, silk and wool fabrics against acetic acid vapor were found to be95,70,90%,respectively. However, all the dyed fabrics displayed outstanding deodorizing performance(99%) against ammonia gas and antibacterial performance(bacteriostatic reduction rate:99.9%) against Staphylococcu aureus and Klebsiella pneumonia(bacteriostatic reduction rate: 99.9%). It is worth noting that pomegranate (Punica granatum L.) colorants notably enhanced the deodorizing and antibacterial performance of cotton, silk and wool fabrics.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제21권1호
• /
• pp.145-150
• /
• 2010

The regenerated silk fibroin with various molecular weights (MW) was prepared by different dissolution condition and the effect of coagulant on the wet spinnability of the various MW silk fibroin solutions dissolved in formic acid was investigated by the observation of wet spun filament in coagulant and the measurement of maximum draw ratio. The observation on the wet spun filament in coagulation bath revealed that good fibers without bead were formed in a high MW and a very high MW silk fibroin samples. In contrast, beads were observed in the silk fibroin sample with medium MW. The maximum draw ratio of wet spun silk fibroin filament decreased with MW reduction. The decrease of maximum draw ratio in isopropanol, acetone, DMF and THF was remarkably higher than that in methanol and ethanol, indicating that the coagulant type strongly influenced the wet spinnability. The two simple evaluation methods used in this study showed complementary information for wet spinnability: (a) The observation of filament in coagulant was effective to check a continuous fiber formation and a bead formation, and (b) the maximum draw ratio measurement was useful to examine the post drawing ability related to molecular orientation.

• 대한화학회지
• /
• 제10권1호
• /
• pp.32-42
• /
• 1966

$CaCl_2$, CaO 및 $WO_3$로 構成되는 熔融鹽을 黑鉛 陽極과 鐵 陰極으로 電解하여 순수한 金屬텅스텐을 얻는 方法에 관하여 실험하였다. 電氣分解에 적합한 熔融浴을 選定하기 위하여 $CaCl_2$-CaO系와 $CaCl_2-CaWO_4$系에 관한 二相 狀態圖를 작성하였으며 同時에 $CaCl_2$와 $WO_3$와의 高溫下에서의 化學反應을 검토하여 安定한 電解浴을 얻기 위해서는 一定量의 CaO가 添加되어야 할 것임을 알 수 있었다. 炭素陽極을 사용하여 $WO_3$를 W와 CO로 분해시킬 때의 分解電壓은 -0.1 volt이었으며 熱力學的 計算에 의한 것은 -0.3 volt이었다. 熔融鹽을 電氣分解한 結果 金屬텅스텐이 100%에 가까운 電流效率로 電極에 析出되나 이는 陽極에서 二次的으로 발생하는 CO가스에 의하여 쉽게 WC등으로 변화하므로 순수한 텅스텐을 얻기 위해서는 電解浴의 溫度를 $1100^{\circ}C$이상으로 유지하여야 된다는 것을 알게 되었다. 電解浴의 組成은 可及的 低融點과 $WO_3$의 分解, $CaCl_2$의 蒸發 등을 억제하기 위해서는 $CaCl_2$ 100分에 대하여 CaO와 $WO_3$가 각 10 乃至 20分이 適切하였으며 CaO와 $WO_3$의 몰比率은 1이상이 요구되었다. 陰極 電流密度를 1~5 $amp/cm^2$의 範圍에서 變化시켜도 電流效率에 큰 影響이 없었다.

• 한국주거학회논문집
• /
• 제19권5호
• /
• pp.77-84
• /
• 2008

The purpose of this study is to develop the housing welfare indicators for evaluating housing welfare policies conducted by the Korean government. The contents of this research were as follows: as a phrase of setting up the development of housing welfare indicators, the scope of housing welfare and the direction of developing housing welfare indicators were settled. Second, as a phrase of drawing the housing welfare indicators, the indicators were categorized and selected. Third, as a phrase of applying the housing welfare indicators, the indicators in this research were quantified, and suggest the housing welfare from 2000 to 2005. As a result of this research, selected housing welfare indicators were settled as follows: the housing welfare indicators comprise 9 in the department of 'House', 4 in the department of 'Community', and 6 in the department of 'Policy Environment' (19 in total). Indicators were (1) Ratio of housing with Flush Toilets (2) Ratio of housing with Kitchen Sink (3) Ratio of housing with Bath facilities (4) Ratio of housing provided water supply (5) Ratio of housing supplied a sewage system (6) Floor Space per person (7) Number of persons per Room (8) PIR (9) RIR (10) Community Facilities Space per person (11) Urban Park Space per person (12) Journey to work (13) Crime Ratio (14) Number of Houses per 1,000 persons (15) Ratio of Substandard housing of the Minimum Housing Standard (16) Ratio of Irregular Dwelling Households (17) Ratio of Owner Occupant (18) Ratio of compulsory immigration (19) Ratio of Long-term Public Social Houses. The housing welfare indicators developed in this research will be used for the comprehensive assessment of the results of housing welfare policies and the establishment of housing policies as a basic material in the future.

• 한국식품영양과학회지
• /
• 제38권8호
• /
• pp.1062-1068
• /
• 2009

DAG 합성율이 가장 높은 몰비율을 선정하기 위하여 GMO와 CLA의 몰비율을 1:1, 2:1 그리고 3:1로 하고 Lipozyme TLIM은 기질 질량의 20%를 사용하여 반응하였다. 그 결과 총 DAG의 함량은 1 hr일 때 높게 나타나 몰비율이 1:1, 2:1, 3:1(GMO:CLA)일 경우 각각 42.6, 54.4 그리고 54.6 area%로 나타났고, DAG 함량이 높은 2:1과 3:1의 기질몰비율 조건 중 MAG와 TAG의 함량이 낮았던 2:1 비율을 가장 적합한 비율로 선정하였다. 적합한 몰비율로 선정된 GMO와 CLA의 몰비율 2:1에 효소량을 2%, 5%, 10% 그리고 20%를 사용하여 효소량에 따른 DAG 합성율을 살펴 본 결과, 효소량을 10% 사용하였을 경우, 반응 6 hr에서 56.2 area%의 가장 높은 DAG 함량을 나타내었다. 이어 Lipozyme TLIM을 10% 사용하여 GMO와 CLA의 몰비율 2:1에 molecular sieves를 전체 기질 질량의 10% 사용하여 molecular sieves 첨가의 유, 무에 따른 DAG 합성율을 알아보았다. 그 결과 효소량을 5%를 사용하여 반응하였을 경우 molecular sieves를 첨가하지 않았을 때보다 총 DAG 함량이 약 30%의 증가율을 보였고, 효소량을 10% 사용하였을 경우 23%의 증가율을 보였다. 이상에서 DAG가 가장 많이 합성된 반응조건은 몰비율이 GMO와 CLA가 2:1이고, Lipozyme TLIM과 molecular sieves의 양이 각각 기질 질량의 10%씩 사용되었을 때이었다. 이 반응 조건으로 6 hr 반응하였을 때 최대의 DAG량이 생성되어 그 함량은 69 area%로 나타났으며, 1,3-DAG과 1,2-DAG의 지방산 조성변화를 살펴 본 결과 1,2-DAG의 지방산 조성 중 CLA의 함량은 반응 시간이 지날수록 증가한 반면, 1,3-DAG의 CLA 함량은 1 hr에서 24 hr까지 증가하였다가 72 hr에서 감소함을 보였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.382-385
• /
• 2008

In the present study, the effect of cold reduction ratio on the spheroidization rate of SK85 high carbon steel sheet was investigated. High carbon steel sheet fabricated by POSCO was soaked at $850^{\circ}C$ for 2 hr in a box furnace and then treated at $570^{\circ}C$ and $670^{\circ}C$ for 10 min in a salt bath furnace followed by water quenching to obtain a fine pearlite structure and coarse pearlite structure. Cold rolling was conducted on the sheets by reduction ratios of 20, 30, and 40 % and heat treatment for spheroidization was carried out at $720^{\circ}C$ for the various time intervals from 1 to 32 hrs. Area fraction of spheroidized cementite was measured with an image analyzer as a function of cold reduction ratios and duration times.