• 한국연초학회지
• /
• 제27권1호
• /
• pp.68-74
• /
• 2005

Glycerol triacetate(triacetin) is the currently used common plasticizer in the making filters from cellulose acetate tow. For the mono acetate filter, the determination of triacetin contents is already established by CORESTA recommended method (No. 59). But unfortunately, the analytical method of triacetin in the activated carbon filter have not reported so far. In this study, it was established the analytical method of carbon filter's triacetin contents at various extraction conditions, bath ratio and internal standard materials. The confidential level appeared above $95\%$ when the extraction time, ISTD material and bath ratio was 3 hours, tripropionin and below 500 mg activated carbon / 50 $m\ell$ ethanol, respectively. Also, in the distribution of triacetin with filter materials in activated carbon filters, the triacetin amount was the most contained in activated carbon. Therefore, this method can be applied to the determination of triacetin contents in the activated carbon filter.

• 한국지역사회생활과학회지
• /
• 제19권2호
• /
• pp.213-221
• /
• 2008

In this study, a dye bath was made using a mixture of distilled water, pine needle extract and bamboo vinegar. Analysis and comparison of various functions of cotton fabrics dyed using bamboo charcoal and gardenia seeds in distilled water and in the dye bath mixture were done. The summary of the results is as follows. Comparing bamboo vinegar and the pine needle extracts, the bamboo vinegar had a higher antibacterial function. In the case of natural dyeing cotton fabrics using bamboo charcoal and gardenia seeds, the additional amount of dyestuff for optimization is 10 g and 20 g respectively per 1 liter of distilled water. The suitable dye bath mixture ratio of distilled water, pine needle extract, and bamboo vinegar considering functionality and economical efficiency of dyed fabrics is 4:3:3. By using the mixture made in this study as a dye bath, improved antibacterial function, deodorization, and colorfastness can be obtained more than distilled water alone.

• 한국표면공학회지
• /
• 제31권6호
• /
• pp.379-388
• /
• 1998

The iron-zinc interfacial reaction and corrosin properties in galvanizing bath containning Ni have been intestigated. The substrate steel plates were galvanized in Zn or Zn-0.018Al baths with various Ni contents. The corrosion resistance of galvanized specimens was also evaluated by $60^{\circ}$bending test for galvannealing speaaimens. The corrosion resistance was improved with Ni addition in pure Zn bath, while deteriorated with Ni addition in Zn-0.18Al bath. The anti-powdering property, on thhe otherhand, was improved with Ni addition in Zn-0.18Al bath, while deteriorated with Ni addition in pure Zn. It was found that the anti-powdering property was improved with increasing $\xi$ phase ratio in reaction layer.

• 한국전자통신학회논문지
• /
• 제8권7호
• /
• pp.1111-1120
• /
• 2013

본 연구는 고장초를 이용한 입욕제를 개발하고자 천연물질인 어성초, 녹차 및 애엽을 고장초와 혼합하여 완제품 3종류를 만들어서 선호도에 관하여 조사하였다. 향, 색, 맛 및 촉감에서 녹차와 고장초가 높은 선호도를 보였다. 고장초에 첨가할 혼합액에 대한 선호도 조사결과 어성초 50%, 녹차 30% 및 애엽 20% 비율로 만든 혼합액의 선호도가 가장 높았다. 선정된 혼합액을 가지고 고장초와 비율을 달리하여 만든 완성품에 대한 선호도 조사에서 선정된 혼합액이 40%, 고장초 60%를 첨가하여 만든 완성품이 가장 높은 선호도를 보였다. 최종 선정된 완제품 입욕제를 가지고 피부조건 변화에 대해 조사한 결과 높은 만족도를 보였다. 그러므로 고장초를 이용한 입욕제 개발은 피부를 건강하게 해주는 효능이 상승하여, 우수한 입욕제가 될 것으로 판단된다.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.797-805
• /
• 2011

This study was carried out to investigate dyeing characteristics of CDP(cation dyeable polyester)/silk knitted fabrics with disperse type cation dyes/acid dyes by one bath dyeing method in comparison with two bath dyeing method in the interests for rationalization of the dyeing process. The apparent color depth(K/S) of the disperse type cation dyes with CDP and that of acid dyes with silk decreased slowly with increasing pH values of dyebath with the exception of sharp decrease at alkali region for CDP. The contamination behavior of CDP by the acid dyes and that of silk by the disperse type cation dyes decreased with progressing of dyeing. The migration ratio(%) of the disperse type cation dyes with CDP is low compared with that of acid dyes with silk. The sediment in mixed dying solution of disperse type cation dyes and acid dyes remarkably less compared with that of regular type cation dyes and acid dyes at $100^{\circ}C$ regardless applying of preventer agent of precipitation. When CDP/silk knitted fabrics was dyed with by with mixtures of disperse type cation dyes/acid dyes one bath or two bath dyeing method, the characteristic of reflectance spectra of CDP components were greatly influenced by disperse type cation dyes and that of silk components by acid dyes. It was confirmed that K/S values of each components of CDP/silk knitted fabrics dyed by one bath dyeing method decreased slightly compared with two bath dyeing method.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.243-251
• /
• 2024

The asymmetric polylactic acid (PLA) membrane was prepared via phase inversion method using non-solvent induced separation (NIPS) technique. This study aims to synthesized as well as to characterize the PLA membrane and evaluating the membrane performance on water flux and permeability. In addition, this research also studied the removal performance of methylene blue dye. The polymer solution has been prepared using 12 wt.% of PLA and dissolved in 88 wt.% of Dimethylacetamide (DMAc) as a solvent. Then, the cast film was immersed in different ratio of coagulant bath medium (distilled water: methanol: ethanol) ranging from 100:0:0, 75:25:0, 75:0:25 and 75:12.5:12.5, respectively). Several characterizations were performed which include, membrane contact angle and membrane porosity. Performance PLA membranes were determined in terms of water flux and permeability at 1 bar transmembrane pressure using dead-end permeation cell. Finally, methylene blue (MB) removal efficiency was tested at the same transmembrane pressure. The findings revealed that the increase of alcohol concentration in coagulant bath resulted in higher porosity and lower contact angle. In short, MB dye rejection efficiency is also closely related to the amount of alcohol ratio used in coagulant baths. Increases in concentration of methanol and ethanol in coagulant bath medium increases the membrane porosity thus increased in efficiency of methylene blue rejection.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.820-832
• /
• 2001

In order to obtain the basic data on the optimum conditions of electroforming process for fabricating the micro wiring pattern for plate type micro- motor core, characteristics of plating bath and properties of deposits were studied with various copper plating baths which contain sulfate, fluoborate, pyrophosphate and cyanide salt, respectively. Cathodic polarization, throwing power, internal stress, texture and surface morphology of deposits were observed. Throwing power of plating solution is deeply related to the polarization curves and the values are in the range of +20∼20%. The order of values ate as follows- pyrophosphate, cyanide, sulfate and fluoborate bath. Internal stresses of deposits are tensile in all of the copper plating bath. Thickness of the deposits plated at the center of holes has the highest value in the pyrophosphate bath and K factor, ratio of height and width of deposit, is 1.44. It was confirmed that the pyrophosphate bath was the best one for the electroforming of wire pattern.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.16-21
• /
• 2008

In this study the effects of swelling and fixing agent for the cotton side of polyester/cotton blended fabrics and the thermosol temperature on the dyeing properties and fastness. were investigated, when the polyester/cotton blended fabrics were dyed with a disperse dye which was able to dye both side of fiber by one bath one step thermosol process. The obtained results are as follows; The dye adsorption decreased with the increase of cotton blend ratio in polyester/cotton blended fabrics, when the ratio of swelling and fixing agent for cotton side was constant. As the thermosol temperature increased up to $210^{\circ}C$, the dye adsorption were increased, but that effect was less significant when the cotton blend ratio was higher.

• 스트레스연구
• /
• 제25권4호
• /
• pp.239-245
• /
• 2017

본 연구는 아로마테라피 족욕이 스트레스와 자율신경계의 활성도에 미치는 효과를 비교하기 위한 연구이다. 실험 처치로 아로마테라피 족욕 군에게는 에센셜 오일 라벤더, 레몬, 티트리를 6:3:1의 비율로 혼합한 후 18 L의 물에 0.5 cc 떨어뜨려 족욕을 하도록 하였고, 족욕 군은 물로만 족욕을 하도록 하였다. 연구결과로 아로마테라피 족욕은 주관적 스트레스 점수(t=3.465, p=0.001), 스트레스 지수(t=3.021, p=0.004)가 유의하게 감소하였으며, 교감신경 활성도는 아로마테라피 족욕 군이 더 유의하게 증가하였고(t=-2.913, p=0.005), 부교감신경 활성도는 유의한 차이가 나타나지 않았다(t=-1.831, p=0.072). 결론적으로 아로마테라피 족욕과 족욕 모두 스트레스를 완화하는 데 효과적이었으며 그 중 아로마테라피 족욕이 스트레스를 더 완화했다. 그러므로 아로마테라피 족욕이 스트레스 감소를 위한 효과적인 중재가 될 수 있으므로, 건강한 성인뿐만 아니라 간호 대상자의 스트레스 감소를 위한 중재로 적극적으로 활용될 수 있으리라 생각한다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.78-85
• /
• 2006

In textile industries, waste effluent containing zinc is generated during the manufacture of rayon yarn from the wood pulp or cotton linters. Due to the strict environmental regulations and the presence of toxic metallic and other constituents, the discharge of industrial effluents in the sewage or disposal of solid sludge as landfill is restricted. Before recycling of zinc as zinc sulphate solution to the spinning-bath of the rayon manufacturing plant the zinc sulphate solution must be free from calcium, which is deleterious to the process as gypsum precipitates with the increase in concentration and forms scale in the bath. In the present work an attempt has been made to develop a process following solvent extraction technique using thiophosphinic extractants, Cyanex 272 and 302 modified with isodecanol and diluted in kerosene to recover zinc from rayon effluent. Various process parameters viz. extraction of zinc from different concentration of solution, distribution ratio, selective extraction, O/A ratio on extraction and stripping from the loaded organic, complex formation in the organic phase etc. have been studied to see the feasibility of the process. The extractant Cyanex 302 has been found selective for the recovery of 99.99% of zinc from the effluent above equilibrium pH 3.4 maintaining the O/A ratio of 1/30 leaving all the calcium in the raffinate. It selectively extracted zinc in the form of complex $[R_{2}Zn.3RH]_{org}$ and retained all the calcium in the aqueous raffinate. The zinc from the loaded Cyanex 302 can be stripped with 10% sulphuric acid at even O/A ratio of 10 without affecting the stripping efficiency. The stripped solution thus obtained could be recycled in the spinning bath of the rayon plant. The raffinate obtained after the recovery of zinc could be disposed safely without affacting environment.