• Journal of the Korean institute of surface engineering
• /
• v.35 no.4
• /
• pp.232-240
• /
• 2002

The composition and the microstructure of the Zn-Cr alloys electroplated in chloride bath with EDTA were studied according to electrolysis conditions. The cathode current efficiency decreased with increasing both Cr/(Cr+Zn) ratio and current density. The Cr content of the alloy deposits increased with Cr/(Cr+Zn) ratio and current density The phase structure of Zn-Cr alloy deposits changed from η-Zn through η-Zn+${\gamma}$'-ZnCr to ${\gamma}$'-ZnCr with increasing Cr content of alloys. The surface morphology of Zn-Cr alloy deposits changed from fine needle shaped crystallites through the mixed structure of needle-shaped and granular one to the colony structure with fine granular crystallites according to the change of phase structure

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.83-84
• /
• 2016

For the slip resistance test of shower room floor, the "O-Y Pull Slip Meter method (O-Y·PSM)" regulated under KS M 3510. This test method uses cooking oil as a substitute of soapy water, and thus it does not reflect the real condition. In this study, on 10 types of floor material samples, the Coefficient of Slip Resistance Bath (CSR·B) on bare foot between 10 types of body wash solution and 6 types of SDS solution was compared. The body wash solution is a mixture of soap and water in 1:20 ratio. As a result, SDS 0.1% solution was the most suitable for a substitute of soapy water in shower.

• Journal of the Korean institute of surface engineering
• /
• v.16 no.4
• /
• pp.188-194
• /
• 1983

The method of trivalent chromium plating has been studied. The relations between the mixing ratio of chromic chloride and DMF, and the corrosion resistance and throwing power of plated chromium have been investigated. As a result, the best result has been obtained, when the mole ratio of chromic chloride and DMF are 0.8 and 5.4M respectively, and it has been learned that the amounts of DMF added have particularly the delicate effects in chromium plating procedures. The results of measuring of pH and reduction potentials of chromium plating bath with addition of DMF showed that the functions of DMF have both the buffer actions for the solution and the complex formation of trivalent chromium.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.377-382
• /
• 2012

CdS thin films have been widely used as a buffer layer of CIGS semiconductor solar cells to reduce the lattice mismatch between transparent electrode and absorber layer. In order to prepare the CdS films with high transparency and low resistivity, they were deposited by varying Cd concentration with the constant S concentration in the solution using chemical bath deposition method. They were analyzed in terms of structural, optical and electrical properties of CdS films according to the $[S^{2-}]/[Cd^{2+}]$ ratio. In the case of Cd concentration higher than S concectration, CdS thin films were formed mainly by cluster- by-cluster formation due to the homogeneous reaction between Cd and S in the solution. Therefore the grain size increased and the transmittance decreased. On the other hand, in the case of Cd concentration lower than S concentration, CdS films were formed by heterogeneous reaction on the substrate rather than in the solution. The CdS films have the grains with the uniform circular shape of a few hundreds ${\AA}$. As the Cd concentration increased in the solution, the $[S^{2-}]/[Cd^{2+}]$ ratio decreased and the resistivity decreased by the increase in the carrier concentration due to the formation S vacancy by the excess Cd.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.55-55
• /
• 2012

To improve the deodorizing and antibacterial performance of various fabrics (cotton, silk and wool) dyed with pomegranate(Punica granatum L.) extract without mordants, natural colorant solutions, which were extracted from pomegranate using water as an extractant at $90^{\circ}C$ for 90 min with a various liquor ratio (solid natural colorant material/solvent water, weight ratio) from 1:100 to 1:5 were used. To achieve the highest K/S and the deodorizing and antibacterial performance, the best liquor ratio, dyeing bath ratio, dyeing temperature and dyeing time were found to be 1:10, 1:50, $80^{\circ}C$ and 60 min, respectively. The deodorizing performance of dyed cotton, silk and wool fabrics against acetic acid vapor were found to be95,70,90%,respectively. However, all the dyed fabrics displayed outstanding deodorizing performance(99%) against ammonia gas and antibacterial performance(bacteriostatic reduction rate:99.9%) against Staphylococcu aureus and Klebsiella pneumonia(bacteriostatic reduction rate: 99.9%). It is worth noting that pomegranate (Punica granatum L.) colorants notably enhanced the deodorizing and antibacterial performance of cotton, silk and wool fabrics.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.21 no.1
• /
• pp.145-150
• /
• 2010

The regenerated silk fibroin with various molecular weights (MW) was prepared by different dissolution condition and the effect of coagulant on the wet spinnability of the various MW silk fibroin solutions dissolved in formic acid was investigated by the observation of wet spun filament in coagulant and the measurement of maximum draw ratio. The observation on the wet spun filament in coagulation bath revealed that good fibers without bead were formed in a high MW and a very high MW silk fibroin samples. In contrast, beads were observed in the silk fibroin sample with medium MW. The maximum draw ratio of wet spun silk fibroin filament decreased with MW reduction. The decrease of maximum draw ratio in isopropanol, acetone, DMF and THF was remarkably higher than that in methanol and ethanol, indicating that the coagulant type strongly influenced the wet spinnability. The two simple evaluation methods used in this study showed complementary information for wet spinnability: (a) The observation of filament in coagulant was effective to check a continuous fiber formation and a bead formation, and (b) the maximum draw ratio measurement was useful to examine the post drawing ability related to molecular orientation.

• Journal of the Korean Chemical Society
• /
• v.10 no.1
• /
• pp.32-42
• /
• 1966

The electrolysis of tungstic oxide dissolved in the bath of calcium chloride and calcium oxide was studied to produce metallic tungsten using carbon as anode and iron as cathode in the temperature range of 900^{\circ}$ to $1200^{\circ}C$. The binary phase diagrams $CaCl_2$-CaO and $CaCl_2-CaWO_4$ systems were constructed to determine the suitability of bath composition and the range of temperatures for the electrolysis. As $WO_3$ reacted with $CaCl_2$ to form oxychloride in the fused salt, the addition of the proper amount of CaO was necessary to avoid the loss of $WO_3$. The optimum compositions of fused bath were $CaCl_2$ 100 parts, CaO and $WO_3$ each 10 to 20 parts, with the CaO, $WO_3$ ratio greater than unity, to keep freezing point low and to prevent the vaporization of $CaCl_2$. The observed decomposition voltage at which $WO_3$ decomposes to W and CO was-0.1 volt, whereas the calculated was -0.3 volt. Metallic tungsten deposited at the cathode reacted easily with CO formed secondarily at the anode surface, to form WC below $1050^{\circ}C$, so that the cell temperature should be above $1050^{\circ}C$. The effects of cathode current densities on current efficiency were minor in the range of 1 to 5 $amp/cm^2$.

• Journal of the Korean housing association
• /
• v.19 no.5
• /
• pp.77-84
• /
• 2008

The purpose of this study is to develop the housing welfare indicators for evaluating housing welfare policies conducted by the Korean government. The contents of this research were as follows: as a phrase of setting up the development of housing welfare indicators, the scope of housing welfare and the direction of developing housing welfare indicators were settled. Second, as a phrase of drawing the housing welfare indicators, the indicators were categorized and selected. Third, as a phrase of applying the housing welfare indicators, the indicators in this research were quantified, and suggest the housing welfare from 2000 to 2005. As a result of this research, selected housing welfare indicators were settled as follows: the housing welfare indicators comprise 9 in the department of 'House', 4 in the department of 'Community', and 6 in the department of 'Policy Environment' (19 in total). Indicators were (1) Ratio of housing with Flush Toilets (2) Ratio of housing with Kitchen Sink (3) Ratio of housing with Bath facilities (4) Ratio of housing provided water supply (5) Ratio of housing supplied a sewage system (6) Floor Space per person (7) Number of persons per Room (8) PIR (9) RIR (10) Community Facilities Space per person (11) Urban Park Space per person (12) Journey to work (13) Crime Ratio (14) Number of Houses per 1,000 persons (15) Ratio of Substandard housing of the Minimum Housing Standard (16) Ratio of Irregular Dwelling Households (17) Ratio of Owner Occupant (18) Ratio of compulsory immigration (19) Ratio of Long-term Public Social Houses. The housing welfare indicators developed in this research will be used for the comprehensive assessment of the results of housing welfare policies and the establishment of housing policies as a basic material in the future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.8
• /
• pp.1062-1068
• /
• 2009

Diacylglycerol (DAG) were synthesized by enzymatic esterification of glyceryl monooleate (GMO) and conjugated linoleic acid (CLA) in a shaking water bath. The reaction was catalyzed by Lipozyme TLIM (immobilized lipase from Thermomyces lanuginosa). Effects of reaction time, molar ratio, enzyme road and molecular sieves were studied. Results of normal-phase high performance liquid chromatography (NP-HPLC) analysis were performed. At 1:1, 2:1 and 3:1 (GMO : CLA) molar ratio and Lipozyme TLIM of 20% amount, DAG were produced in 42.6, 54.4 and 54.6 area% in 1 hr, respectively. When different Lipozyme TLIM amounts (2, 5, 10, 20%) were used with 2:1 (GMO : CLA) molar ratio, DAG were produced 21.4 (24 hr), 51.7 (12 hr), 56.2 (6 hr) and 54.4 (1 hr) area%, respectively. The reaction in the absence of molecular sieves increased DAG contents. The maximum DAG concentration conditions were obtained with molar ratio of 2:1 (GMO : CLA), lipase concentration of 10% (of substrate), 10% molecular sieves and reaction time of 6 hours at 55$^{\circ}C$. Under this reaction condition, produced DAG-rich oil was composed of 69 area% DAG, 7.9 area% TAG, 2 area% FFA, and 21.1 area% MAG.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.382-385
• /
• 2008

In the present study, the effect of cold reduction ratio on the spheroidization rate of SK85 high carbon steel sheet was investigated. High carbon steel sheet fabricated by POSCO was soaked at $850^{\circ}C$ for 2 hr in a box furnace and then treated at $570^{\circ}C$ and $670^{\circ}C$ for 10 min in a salt bath furnace followed by water quenching to obtain a fine pearlite structure and coarse pearlite structure. Cold rolling was conducted on the sheets by reduction ratios of 20, 30, and 40 % and heat treatment for spheroidization was carried out at $720^{\circ}C$ for the various time intervals from 1 to 32 hrs. Area fraction of spheroidized cementite was measured with an image analyzer as a function of cold reduction ratios and duration times.