• 한국토양환경학회지
• /
• 제2권2호
• /
• pp.53-60
• /
• 1997

중금속에 의해 오염된 토양에 대해 토양세척기법을 적용하기 위한 최적의 조건을 도출하고자 회분식 및 실험실 규모의 파이롯트 실험을 수행하였다. 대상 중금속으로는 구리, 납, 아연을 선정하였고 각 중금속의 농도는 구리 500mg/kg dry soil, 납 1,000mg/kg dry soil, 아연 500mg/kg dry soil로 결정하였다. 세정제로는 유기산 중 citric acid와 oxalic acid를 선정하였다. 회분식 실험 결과, 구리, 납, 아연의 세정효율은 각각 79%, 72%, 72%로 나타났으며, 구리와 납에 대한 세정제의 농도와 진탕비는 citric acid 50mM과 1:5(중량/체적비)가 최적조건으로 판명되었고, 계면활성제 OA-5 및 SDS l∼2%를 첨가함으로써 세정효율을 향상시킬 수 있었다. 파이롯트 규모실험에서는 납으로 오염된 토양에 대하여 1차 토양세척시 59%의 세정효율을 얻었으며, 2차 토양세척으로 78%까지 세척할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제34권3호
• /
• pp.229-254
• /
• 2004

The objective of this study was to scrutinize the rationale of SUPAC-MR and its application in processing postapproval changes to modified release solid oral dosage forms. The types of postapproval changes that were primarily covered with SUPAC-MR included variations in the components and composition, the site of manufacturing, batch size, manufacturing equipment, and manufacturing process. SUPAC-MR defined levels of postapproval changes that the industry might make. Classification of such categories was based on the likelihood of risk occurrence and potential impact of changes upon the safety and efficacy of approved drug products. In most cases, the changes could be classified into 3 levels. It described what chemistry, manufacturing, and control tests should be conducted for each change level. The important tests specified in SUPAC-MR were batch release, stability, in vitro dissolution, and in vivo bioequivalence tests. It then suggested what type of a filing report should be submitted to the FDA for each change level. In general, level 1 changes could be reported in an annual report, whereas level 2 and/or 3 changes could be submitted in changes-being-effected or prior approval supplements. It could be understood that the purpose of SUPAC-MR was to maintain the safety and quality of approved modified release solid oral dosage forms undergoing certain changes. At the same time, it contributed to providing a less burdensome regulatory process with the manufacturers when they wanted to make postapproval changes. European regulatory agencies also implemented SUPAC-like regulations in handling such changes to drug products. Therefore, in this study a recommendation was made for KFDA and the Korean industry to evaluate thoroughly the usefulness of these guidances and regulations in dealing with postapproval changes to modified release solid oral dosage forms.

• Nuclear Engineering and Technology
• /
• 제6권4호
• /
• pp.231-237
• /
• 1974

유동액체를 수송하는 도관 또는 폐용기의 누설의 탐지 및 위치한정을 위하여 $^{51}$ Cr-EDTA및 $^{51}$ Cr-DTPA를 합성하고 Column Experiment 그리고 PH를 변화시켜 Batch equilibrium Experiment를 하였다. Column Experiment에서 $^{51}$ Cr-EDTA의 회수율은 Quartz sand에서 100%, Steel sawdust에서 80.9% 그리고 $^{51}$ Cr-DTPA는 Quartz sand에서 77.4%, Steel sawdust에서 6.4%이다. Recovery curve는 Steel sawdust $^{51}$ Cr-DTPA system에서 예외로 일정한 Plateau 를 표시하지 않는다. Batch Equilibrium Experiment에서 분배계수 Kd와 pH와의 관계를 Quartz asand, Montmorillonite, steel sawdust 그리고 Mixed Cement Raw Material둥을 매질로 하여 검토하였다. 일반적으로 $^{51}$ Cr-EDTA에 대한 Kd값이 $^{51}$ Cr DTPA에 대한 그것보다 낮다. $^{51}$ Cr-EDTA에 대한 Kd값이 pH 6.0, 7.0, 그리고 8.0에서 거의 0이 된다.

• Journal of the Korean Data and Information Science Society
• /
• 제28권6호
• /
• pp.1245-1255
• /
• 2017

온라인 학습은 자료가 실시간으로 혹은 배치 단위로 축적되는 상황에서 주어진 목적함수의 해를 계산하는 방법을 말한다. 온라인 학습 알고리즘 중 배치를 이용한 확률적 경사 하강법 (stochastic gradient decent method)은 가장 많이 사용되는 방법 중 하나다. 이 방법은 구현이 쉬울 뿐만 아니라 자료가 동질적인 분포를 따른다는 가정 하에서 그 해의 성질이 잘 연구되어 있다. 하지만 자료에 특이값이 있거나 임의의 배치가 확률적으로 이질적 성질을 가질 때, 확률적 경사 하강법이 주는 해는 큰 편이를 가질 수 있다. 본 연구에서는 이러한 비정상 배치 (abnormal batch) 있는 자료 하에서 효과적으로 온라인 학습을 수행할 수 있는 수정된 경사 하강 알고리즘 (modified gradient decent algorithm)을 제안하고, 그 알고리즘을 통해 계산된 해의 수렴성을 밝혔다. 뿐만 아니라 간단한 모의실험을 통해 제안한 방법의 이론적 성질을 실증하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권6호
• /
• pp.864-873
• /
• 2013

In developing countries, biogas energy production is seen as a technology that can provide clean energy in poor regions and reduce pollution caused by animal manure. Laboratories in these countries have little access to advanced gas measuring equipment, which may limit research aimed at improving local adapted biogas production. They may also be unable to produce valid estimates of an international standard that can be used for articles published in international peer-reviewed science journals. This study tested and validated methods for measuring total biogas and methane ($CH_4$) production using batch fermentation and for characterizing the biomass. The biochemical methane potential (BMP) ($CH_4$ NL $kg^{-1}$ VS) of pig manure, cow manure and cellulose determined with the Moller and VDI methods was not significantly different in this test (p>0.05). The biodegradability using a ratio of BMP and theoretical BMP (TBMP) was slightly higher using the Hansen method, but differences were not significant. Degradation rate assessed by methane formation rate showed wide variation within the batch method tested. The first-order kinetics constant k for the cumulative methane production curve was highest when two animal manures were fermented using the VDI 4630 method, indicating that this method was able to reach steady conditions in a shorter time, reducing fermentation duration. In precision tests, the repeatability of the relative standard deviation (RSDr) for all batch methods was very low (4.8 to 8.1%), while the reproducibility of the relative standard deviation (RSDR) varied widely, from 7.3 to 19.8%. In determination of biomethane concentration, the values obtained using the liquid replacement method (LRM) were comparable to those obtained using gas chromatography (GC). This indicates that the LRM method could be used to determine biomethane concentration in biogas in laboratories with limited access to GC.

• Journal of Animal Science and Technology
• /
• 제52권6호
• /
• pp.513-519
• /
• 2010

A series of experiments were performed to study the influence of the following parameters on the physical traits and composition of swine manure compost: (1) addition of magnesium (Mg) at a molar ratio of 1.2 with respect to $PO_4$, and (2) reutilization of compost containing $MgNH_4PO_4{\cdot}6H_2O$ (magnesium ammonium phosphate, MAP). Three independent batch tests were conducted for replication: batch test I-control (C) and Mg added (T), batch test II-C, T and compost recycle ($T_{R1}$), and batch test III-C, T and compost recycle ($T_{R2}$). Magnesium addition and compost reutilization had no adverse effect on the degradation of organic matter. Reuse of the compost, however, had a clear effect on the total nitrogen (TN) and total phosphorus (TP) contents in the final compost. Repeated compost reutilization as a bulking material was resulted in composts rich in N and P. Upon adding the Mg supplement to the composting materials, the ortho-phosphate (OP) to TP ratio decreased due to the MAP crystallization reaction. The decrease in the OP/TP ratio and the increase in the TP content of the compost indicate that water-soluble phosphate is converted into a slow-release phosphate by the formation of crystals during composting. X-ray diffraction analysis of the irregular shaped crystals in the compost indicated that they are MAP crystals and that the crystallization of MAP begins immediately after the addition of the Mg supplement. The Mg addition to composting materials and the reutilization of compost as a bulking material would be a practical means to conserve nutrient content.

• 한국재료학회지
• /
• 제33권7호
• /
• pp.265-272
• /
• 2023

In this study, the synthesis of nitrobenzene was carried out using sulfated silica catalyst. The study delved into H₂SO₄/SiO₂ as a solid acid catalyst and the effect of its weight variation, as well as the use of a microwave batch reactor in the synthesis of nitrobenzene. SiO₂ was prepared using the sol-gel method from TEOS precursor. The formed gel was then refluxed with methanol and calcined at a temperature of 600 ℃. SiO₂ with a 200-mesh size was impregnated with 98 % H₂SO₄ by mixing for 1 h. The resulting 33 % (w/w) H₂SO₄/SiO₂ catalyst was separated by centrifugation, dried, and calcined at 600 ℃. The catalyst was then used as a solid acid catalyst in the synthesis of nitrobenzene. The weights of catalyst used were 0.5; 1; and 1.5 grams. The synthesis of nitrobenzene was carried out with a 1:3 ratio of benzene to nitric acid in a microwave batch reactor at 60 ℃ for 5 h. The resulting nitrobenzene liquid was analyzed using GC-MS to determine the selectivity of the catalyst. Likewise, the use of a microwave batch reactor was found to be appropriate and successful for the synthesis of nitrobenzene. The thermal energy produced by the microwave batch reactor was efficient enough to be used for the nitration reaction. Reactivity and selectivity tests demonstrated that 1 g of H₂SO₄/SiO₂ could generate an average benzene conversion of 40.33 %.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 총회 및 춘계 학술발표회 논문집
• /
• pp.43-49
• /
• 1998

Retardation effect of heavy metals in soils caused by adsorption onto the surfaces of solids particles is well known phenomena. The adsorption of metal ions has been recognized more strong in clay mineral and organic matter contents rather than sands and gravels. In this study, we investigated the retardation effect in two sandy soils by conducting batch and column tests. The column tests were conducted to obtain the relationship between concentration and time known as breakthrough curve (BTC). We applied pulse type injection of ZnCl$_2$solution on the inlet boundary and monitored the effluent concentration at the exit boundary under steady state condition using EC-meter and ICP-AES. Batch test consisted of an equilibrium procedure for fine fractions collected from two sandy soils for various initial ZnCl$_2$concentrations, and analysis of Zn ions in equilibrated solution using ICP-AES. The results of column test showed that i) the peak concentration of Zn analyzed by ICP was far less than that detected by EC-meter for both soils and ii) travel times for peak concentration were more less identical for two different monitoring techniques. The first result can be explained by ion exchange between Zn and other cations initially present in the soil particles since ICP analysis showed a significant amount of Ca, Mg ions in the effluent. From the second result, we found that retardation effect was not present in these soils due to strong cation exchange capacity of Zn ion over other cations since we did not apply a solution containing more adsorptive cations such as Al. The result of batch test also showed high distribution coefficients (K$_{d}$) for two soils supporting the dominant ion exchange phenomena. Based on the retardation factor obtained from the Kd, we predicted the BTC using CDE model and compared with the BTC of Zn concentration obtained from ICP The predicted BTC, however, disagreed with the monitored in terms of travel time and magnitude of the peak concentrations. The only way to describe the prominent decrease of Zn ion was to introduce decay or sink coefficient in the CDE model to account for irreversible decrease of Zn ions in liquid phase.e.

• 한국응용과학기술학회지
• /
• 제29권1호
• /
• pp.1-12
• /
• 2012

본 논문은 다양한 시설내에 적은 농도의 $CO_2$ 제거를 위한 선택적 $CO_2$ 흡수능력을 향상시킨 흡착제의 효율평가에 관한 것이다. 직경 4mm의 구형 흡착제는 시판용 제올라이트에 첨가제, 물, 바인더, LiOH를 섞어 제조하였다. 칼럼테스트에서 400분 이내에 90% 이상의 $CO_2$흡착효율을 나타내었고, 흡착필터모듈 흡착능력을 평가하기 위해 회분식과 연속식타입의 챔버테스트가 시행되었다. 회분식테스트에서 30분 이내에 약 92%의 $CO_2$가 제거되는 것을 확인하였다. 연속식테스트에서 30분 이내 70%의 $CO_2$가 제거효율을 보였으며, 2,500ppm 이상의 $CO_2$가 제거되는 것을 확인하였다. 재현성테스트를 수차례 수행한 결과 15일동안 1,000ppm 이상의 $CO_2$가 연속적으로 제거됨을 보였다. TGA 분석법을 이용한 흡착량 분석에서 흡착제 g당 5.0mmol의 $CO_2$를 흡착하는 것으로 나타났다. 본 연구에서 개발된 흡착제는 상온에서 저농도 $CO_2$ 실내환경에 적용가능한 것으로 판단된다.

• 상하수도학회지
• /
• 제13권4호
• /
• pp.62-71
• /
• 1999

The containment retardation capacities of four different aquifers were evaluated in a preliminary study for development of bank filtration in the Young San river area. $NO_3-N$, $NO_2-N$, $NH_4^+-N$, Fe, Mn, phenol, and chloride were selected as the target contaminants and a nonreactive tracer, respectively. Batch isotherm tests were conducted to measure the partition coefficients of the target contaminants. The mass transport parameters of nonreactive tracer were estimated from column tests. From the results of bath isotherm tests, it was shown that lower stream aquifer materials have greater partition coefficients of $NO_3-N$, $NH_4^+-N$, Mn, and phenol than the upper stream aquifer materials; however, there was no significant position-dependent trend for Fe. All aquifer materials tested have the same range of partition coefficients for $NO_2-N$. Column tests showed that the molecular diffusion of Cl- was much less than the mechanical dispersion; and there was no significant difference between the estimated dispersivities of tested aquifer materials. Consequently, it seems that the difference in the containment retardation capacities between four aquifers tested in this study would primarily result not from hydrodynamic dispersion but from partitioning.