• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.82-90
• /
• 1999

The buddhistic painting of Song-Kwang temple in Seungjoo-gun, Chonnam, Korea is not known in chronicle, but it could be estimated to works in the early 19th century through it's remaining records and qualities of materials. And it was analysed the qualities of materials consisting of pigment layer, silken-ground layer and support layer in order to preserve buddhistic painting, made back-adherent paper of the support layer proper to it, tested its compatibility, and then concluded as follows. 1. The section structures of buddhistic painting is consisted of the pigment layer, silken-ground layer of silk and the support layer of Korean hand made paper, it could be recognized that buddhistic painting in 19th century was basically composed of the pigment layer, the silken-ground layer and the support layer. Moreover the pigment layer and the silken-ground layer got adhered with glue, and sheets of support layers got back adhered with paste. 2. The support layer of buddhistic painting consisted of 5 layers and two kinds of paper were used for them. The first and second layers were composed of Korean hand made paper made of pure paper mulberry bast fibers, and the rest of them of paper that paper mulberry bast fibers were mixed into recycled hemp fibers. Though it is difficult to assert without the security of more data, finding out the then situation through the qualities of materials, it was presumed that the society in 19th century was suffered from economical difficulties and the operation of the paper industry of temples was rather difficult and so low-qualitative recycled hemp fibers might used for back-adherent paper. 3. Considering tension between silken-ground layers and support layers of this materials, newly made back-adherent paper was used for repair, and then I could conform that it was proper to back-adherent paper for repair.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.43-49
• /
• 2007

Anatomical properties of Kenaf (Hibiscus cannabinus L.) planted in a reclaimed-land of Korea were examined to understand the growth characteristics by an optical and scanning electron microscopy. The samples of kenaf were taken from four positions of the stem (3, 35, 70, 105 cm above from the ground) in four growth periods (July. August, September, October) from seeding planted in the middle of May. Bast fiber, phloem rays, cortex parenchyma cells and sieve tube members were observed in phloem, and vessel elements, fibers and rays in xylem. Solitary and multiple radial pores existed in xylem. The cell types of ray parenchyma in radial section were procumbent, upright, and square. The intervascular pitting showed an alternate type. Xylem proportion, the number of bast fibers and dimension of phloem rays increased with increasing growth period, and decreased with increasing stem height. The proportion of multiseriate rays was higher than that of uniseriate and biseriate rays in xylem with increasing growth period. On the other hand, The proportion of multiseriate rays was lower than that of uniseriate and biseriate rays in xylem with increasing stem height.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.88-97
• /
• 2014

For the purpose of reproduction of traditional gold thread, the artifact investigation was organized for 70 cases (109 pieces) of relics from Korea, China and Japan. In most cases, the main backside material of gold thread from Korea was the bast fibers from paper mulberry. In this study, the optimum sheet-making of Hanji for gold thread reproduction was tried by controlling several process factors of Hanji such as the cooking and beating time of paper mulberry fibers, the number of sheet-making ply, and converting method (Dochim). Tensile index, folding endurance and compressive strength of Hanji showed differences according to the correlation between cooking and beating time, and application of converting method (Dochim), while bending stiffness fell with decrease of thickness. These results can be applied to consider manufacturing factors to make Hanji for the production of gold thread.

• The Korean Journal of Ecology
• /
• v.24 no.6
• /
• pp.381-384
• /
• 2001

A preliminary comparative histodimensional studies, such as wood to bark ratio, total area of parenchyma cells and bast fibers, height and diameter of vascular rays, pith diameter and phenological parameters, height of the plant, perimeter of the stem, dry weight of the stem and leaves have been investigated for the low and high rubber bearing Guayule plants growing in same and different climatic regions of India. A plausible correlation is found between the percentage of rubber content and anatomical characters in the investigated varieties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.5
• /
• pp.26-31
• /
• 2007

Hanji is a traditional Korean handmade paper, which has been known in ancient Far East as excellent quality calligraphic paper for more than 1,500 year. Hanji is mostly made of Korean paper mulberry bast fibers, and if properly processed, normally lasts for more than 1,000 years with significant strength and still recognizable calligraphic writings or drawings on it. Dochim is a special way of Hanji calendering process, but is turned out to be quite different from modern calendering (machine calendering) in several aspects. In Dochim process, mechanical impacts were applied vertically to the surface of papers. Compared to the modern calendering, Dochim increased paper gloss much more, but paper smoothness a little less. By the Dochim process, densification occurred and the degree of densification was more sensitive to the fiber type in the Dochim process than in the calendering method.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.49-56
• /
• 1993

This study was performed to investigate the pollution-free Korean traditional papermaking characteristics from paper mulberry by sulfomethylation pulping. Bast fibers were pulped by sulfomethylated cooking liquor, and by alkali and alkali-peroxide processes for the comparison. Sulfomethylated pulping resulted in the superior pulp with high yield and better quality compared to those of alkali and alkali-peroxide pulps. Since the pulp was so bright, there was almost no need additional bleaching. Pollutant loads of sulfomethylated pulping effluent were very low in terms of pH, turbidity and color compared to those of alkali. Pollution-free effluents was accomplished by simple filtering treatment with pine bark, charred rice hull and sawdust compost. Pine bark was the most effective in reduction rate of pollutants.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.17-22
• /
• 2003

A kind of image analysis system is used to investigate the structural features of the papers made from Indian mallow. The screen mark on the paper was identified and analyzed. The dusts, shives and fiber bundles were manifested and calculated. In the aspect of Indian mallow hanji's surface characteristics analyzed by an Image analyzer, the average of gray level and its standard deviation hanji from the woody core were rather lower than of bast fiber pulp because of better sheet formation of the formers. Hower. high brightness hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.4 s.132
• /
• pp.60-65
• /
• 2005

This study was carried out to investigate the sheet properties of Indian mallow Hanji, made by different pulping methods, such as alkali and sulfomethylated pulpings, and different stock compositions, various mixing ratios of bast fiber and wood core fibers. Indian mallow Hanjis made with 60% of woody core pulps were shown better Chinese ink spreading distance than those of the others. The Chinese ink spreading distance of the Indian mallow Hanjis made from bast fiber pulp only were unsuitable for Hwaseonji. The Chinese ink spreading distance of Indian mallow Hanji was closely related to the mixing ratio of long fiber and short fiber. Especially sulfomethylated pulping method was superior to alkali pulping method.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.562-577
• /
• 2020

In this study, to conserve the clay seated Vairocana Buddha triad in Seonunsa temple, Gochang (Treasure 1752), the primary materials employed for creating the clay Buddha statues were scientifically analyzed. By analyzing the soil layer constituting the Buddha statues, it is observed that the said layer comprises sand having particle size greater than that of medium sand and soil having particle size smaller than that of fine sand, which were used in a ratio of 7:3, along with the bast fibers of paper mulberry (Broussonetia kazinoki). Hence, the aforementioned soil layer is composed of a mixture of sand and weathered soil, along with bast fibers to prevent scattering. By analyzing the tree species, it is found that the wooden materials constituting the bottom board and the interior of Buddha's sleeves of the Amitabha Buddha statue, Vairocana Buddha statue, and Medicine Buddha statue are hard pines (Pinus spp.). Additionally, three layers are found in the cross section of the gold layer. Furthermore, each of the hair sections of the Buddha statues is composed of earthy materials such as quartz, albite, microcline, mica, and magnetite, and the hair surface was painted by incorporating black materials containing magnetite.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.67-74
• /
• 2010

This study was carried out to investigate the pulping and papermaking characteristics of lotus (Nelumbo nucifera G.) leafstalk for the development of high performance paper. Anatomical and chemical properties of the lotus leafstalk were analyzed. The pulping and papermaking properties of the lotus leafstalk by conventional alkali and sulfomethylated pulping processes were also evaluated. The length and width of fibers were 0.06-3.32 mm (av. 1.23 mm) and 3.47-25.6 ${\mu}m$ (av. 20.7 ${\mu}m$), respectively. The length and width of vessel elements were 0.07-0.78 mm (av. 0.20 mm) and 14.1-330.0 ${\mu}m$ (av. 54.13 ${\mu}m$), respectively. The fiber length/fiber width ratio was 60.20. The extractives (cold water, hot water, 1% NaOH and ethanol-benzene) and lignin content of lotus leafstalk were higher than those of plant bast fiber. The contents of holocellulose, lignin, and ash were 73.8%, 24.3%, and 4.3%, respectively. The pulp yields based on pulping methods were sulfomethylated pulping av. 52%, and alkaline pulping av. 42%. The conventional alkaline pulping shows better pulp and sheet properties than the sulfomethylated pulping which was modified pulping processes. But the sulfomethylated pulping shows higher brightness than alkali pulping. In the consequence of FE-SEM observation, lotus leafstalk pulp consists of various kinds of thin walled fibers which have large amount of small pits.