• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.25-32
• /
• 2009

Currently, various types of TDM (Transportation Demand Management) policies are being studied and implemented in an attempt to overcome the limitations of supply oriented policies. In this context, this paper addressed issues of effectiveness and possible domestic implementation of the HOT lane. The possible site of implementation selected for this simulation study is part of the Kyung-bu freeway, where a dedicated bus lane is currently being operated. Minimum length of distance required in between interchanges and access points of the HOT lane for vehicles to safely enter and exit the lane, and traffic management policies for effectively managing the weaving traffic trying to enter and exit the HOT lane were presented. A 5.2km section of freeway from Ki-heuing IC to Suwon IC and a 8.3km section from Hak-uei JC to Pan-gyo JC have been selected as possible sites of implementation for the HOT lane, in which congestion occurs regularly due to the high level of travel demand. VISSIM simulation program has been used to analyze the effects of the HOT lane under the assumption that one-lane HOT lane has been put into operation in these sections and that the lane change rate were in between 5% to 30%. The results of each possible scenario have proven that overall travel speed on the general lanes have increased as well by 1.57~2.62km/h after the implementation of the HOT lane. It is meaningful that this study could serve as a basic reference data for possible follow-up studies on the HOT lane as one effective method of TDM policies. Considering that the bus travel rate would continue increase and assuming the improvement in travel speed on general lanes, similar case study can be implemented where gaps between buses on bus lane are available, as a possible alternative of efficient bus lane management policies.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.99-111
• /
• 2023

The purpose of this study was to provide basic data for setting more detailed standards for baby food and to provide food information that can be used in real-world settings. We purchased 80 snacks and 40 drinks for infants and toddlers from supermarkets and online markets and analyzed tar color, artificial sweeteners, mycotoxins, and nutritional components (e.g., sucrose, sodium, and calcium). Fortunately, it was confirmed that both tar color and sodium saccharin, which do not have detection criteria for labeled foods for infants and toddlers, were not detected. However, acesulfame potassium was detected at 0.07 g/kg in one snack sample. As for myxotoxins, aflatoxin (B1, B2, G1, and G2) and ochratoxin A were not detected. Fumonisin B1, fumonisin B2, and zearalenone were detected in the ranges of 9.78-78.94 ㎍/kg, 5.58-11.73 ㎍/kg, and 2.96-8.83 ㎍/kg, respectively, but only in snacks. Sucrose was detected in 65 of the snacks (0.02-40.94 g/net weight [g]) and in 24 of the drinks (0.12-27.60 g/net weight [g]). Minerals were detected in most of the samples, and in four snacks, the zinc content per net exceeded the tolerable upper intake level for infants. Sixteen snacks exceeded the food standards for sodium content for infants and toddlers, but none of them were labeled as food for infants and toddlers in the product manufacturing report, such that the corresponding standards could not be applied. Therefore, it seems necessary to establish institutional improvements, such as strengthening labeling standards, so that the currently enforced standards can be appropriately applied, and establishing standards for labeled foods for infants and toddlers.

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.537-545
• /
• 2011

This study was conducted to obtain basic information on physiological and proteomic responses of barley seedlings to salt stress. Shoot dry weight decreased significantly as the level of soil salinity increased. Salt stress-induced decrease of relative shoot dry weight was lower in cv. "Sanglok" than in cv. "Sunwoo". Under the salt stress, SPAD value decreased, and the value was higher in cv. "Sanglok" than in cv. "Sunwoo". Sodium ion content in the leaves increased as NaCl concentration increased, and the content was higher in cv. "Sunwoo" than in cv. "Sanglok". The K⁺/Na⁺ ratio was higher in cv. "Sanglok" than in cv. "Sunwoo". Salt stress-induced alterations in protein expression of the leaves were detected by two dimensional electrophoresis, and 47 protein spots showing altered expression were selected. Among the selected protein spots, 17 protein spots were up-regulated and 28 spots down-regulated in cv. "Sanglok". In cv. "Sunwoo", 14 protein spots were up-regulated and 27 spots down-regulated. Out of 47 deferentially expressed protein spots, 18 protein spots were identified using mass spectrometry and NCBI protein database. Among the identified proteins, ten proteins are known to be involved in various stress responses, but the others are not directly involved in stress responses.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.142-157
• /
• 2001

This study was conducted to get the basic information for promoting farm machinery productivity by surveying the regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester. The survey was carried out through 9 provinces including Cheju province by direct visiting farmers with prepared questionnaire. The results of this study can be summarized as follows : 1. The average farming carrier of the surveyed farmers was 25.3 years, and 21-30 years of farming carrier showed the highest portion as 40.7%. The average carrier of using farm machinery was 9.4 years, and that was 14.9 years for power tiller, 8.3 years for farm tractor, 9.0 years for rice transplanter, 7.9 years for combine harvester, 7.5 years for mini tiller, 9.7 years for power sprayer, and 8.2 years for binder etc. 2. The regular maintenance for farm machinery was conducted mainly at repair shop (49.5%) or dealer agency (12.0%) as 61.5%, and 34.9% of farmers conducted the regular maintenance by themselves at their house. 3. The reasons for not-fully recognizing operation manual and insufficient before-, during-, after-maintenance of farm machinery were insufficient time for them (45.8%), troublesome (22.9%), unknown maintenance method (16.3%), unknown the necessity for maintenance (12.4%), and others (2.6%) in order. 4. For the annual exchange of engine oil, 3.2 times is necessary but actually 1.7 times was exchanged for power tiller, 4.3 times is necessary but actually 1.9 times was exchanged for farm tractor, 2.7 times is necessary but actually 1.7 times was exchanged for rice transplanter, 2.2 times is necessary but actually 2.3 times was exchanged combine harvester. 5. For the annual cleanness or exchange of fuel filter, 3.2 times is necessary but actually 1.1 times was done for power tiller, 4.3 times is necessary but actually 1.6 times was done for farm tractor, 2.7 times is necessary but actually 1.7 times was done for rice transplanter, 1.9 times is necessary but actually 0.8 times was done for combine harvester. 6. For the annual cleanness or exchange of air filter, 3.2 times is necessary but actually 1.4 times was done for power tiller, 4.2 times is necessary but actually 2.4 times was done for farm tractor, 2.6 times is necessary but actually 1.6 times was done for rice transplanter, 3.9 times is necessary but actually 7.0 times was done for combine harvester. 7. For the experience of breakdown related to maintenance, 5.3% of farmers experienced breakdown due to the insufficient exchange of engine oil, 7.7% of farmers experienced breakdown due to the insufficient cleanness or exchange of fuel filter, and 2.9% of farmers experienced breakdown due to the insufficient cleanness or exchange of air filter. 8. Most farmers (76.1%) recognized the necessity for agricultural machinery training or education, and most farmers preferred about one week for the training period, simple or ease maintenance for the training level, agricultural technical center or agricultural machinery manufacturer for the training agency. 9. Complete recognition of operation manual and sufficient before-, during-, and after-maintenance for farm machinery can minimize the breakdown as well as conduct suitable period farming, enlarge the endurance, prevent the safety accidents, and promote productivity of farm machinery. Therefore, these can be accomplished by the thorough training or education for agricultural machinery.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.19-19
• /
• 2022

Hulled and naked oat is a perspective crop for the low input production systems due to its low requirements for soil quality and nutrition. Oats have good competitive ability against weeds and can provide appropriate yield in organic farming in comparison with other cereal species such as wheat or barley. It is a perspective crop from the point of view of use in the food industry too. The aim of our study was to compare the production and quality parameters of naked and hulled oat grown in both organic (OF) and conventional fields (CF). Small plot trials were conducted in two locations in the Czech Republic (České Budějovice, Prague) for four years (2018-2021) in two production systems (OF, and CF). We used four varieties of hulled oat (Korok, Kertag, Raven, Seldon) and one variety of naked oat (Patrik). During the vegetation, agronomically important data were recorded. After harvest samples were processed in the laboratory and analyzed selected quality parameters of grain dry matter (the protein content was determined by the Kjeldahl method, starch content in grain according to Ewers, fat content in grain dry matter by the modified method according to Soxhlet, and ash content in grain dry matter). The data were evaluated using the program STATISTICA version 13.2, StatSoft, Inc., California, USA. It is clear from the results that the number of panicles before the harvest was influenced by the location, cultivation system, year, and, to a lesser extent, the influence of the variety. The number of panicles in OF averaged 340 per square meter, which was 90% of the value of CF. For thousand grain weight (TGW), a significantly predominant effect of year was found. The independent effect of location on TGW was statistically not significant. Grain yield was predominantly influenced by cultivation system and location. In OF, it reached an average of 3.97 t.ha^-1, which was 75% of the yield of CF. As part of the evaluation of the basic grain quality indicators, the content of protein, starch, fat, and ash in the dry matter of the grain was evaluated. The content of protein in the dry matter of the grain was predominantly influenced by year, followed by the influence of the variety and a fairly comparable influence of the cultivation system and locality. On average, it achieved 16.05% in OF and 17.01% in CF. The starch content was then related to the protein content, where as a result of the lower protein content in the grain of OF oats, the content of starch and fat was on the contrary increased. The year turned out to be the most significant factor, affecting both the starch content in the dry matter of the grain and the fat content. This was followed again by a fairly comparable influence on the cultivation system and locality. The influence of the cultivation system and location was not statistically significantly applied in the case of ash content in dry matter. Based on our results we can propose both types of oat (hulled and naked) as perspective crops for OF. An organic farmer can expect to achieve stable yields which, in less favorable conditions for the production of cereals in the OF, may be close to the level of conventional yields. In the future, it will be important to change agrotechnology in OF and increase oat yield because this crop has a good potential to grow in areas with low nitrogen input or less fertile soil.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.24-35
• /
• 2023

Recently, the Ministry of Land, Infrastructure and Transport presented the '6th Construction Technology Promotion Basic Plan' and 'Smart Construction Revitalization Plan (2022.7.20)'. Off-Site Construction (OSC), which involves construction and production of PC (Precast Concrete) and Modular, etc., has advantages in shortening the construction period, reducing costs, improving quality, reducing construction waste, and reducing safety accidents. However, the construction cost is high compared to the traditional RC construction method, which has hindered its utilization and spread. In this study, OSC utilization was improved. An economic analysis indicator and methodology that can support decision-making in the planning and design stages for multi-unit housing were proposed. The factors used in the economic analysis of OSC (based on the PC method) of apartment houses were reviewed. As for the indicators used in the cost and benefit section, 'Construction Period', 'Disaster Occurrence', 'Waste Generation', and 'Greenhouse gas Emission', which reflect the technical advantages of OSC, were derived. In addition, a scenario analysis was conducted based on actual apartment housing case data for the presented economic analysis indicators and benefit calculation standards. The level of benefit that offsets the difference between the existing RC construction method and the construction cost was reviewed. In future studies, it will be necessary to conduct additional case studies to apply the measurement criteria for detailed indicators and supplement the benefit indicators.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.6
• /
• pp.1-11
• /
• 2023

By comparing and analyzing the effects of the 2013 Suncheon Bay International Garden Expo and the 2023 Suncheon Bay International Garden Expo, designated as Korea's first national garden, this study aims to present basic data for the future operation direction and sustainability strategy. First, in both fairs, satisfaction throughout the event was high, 4.0 or higher. In particular, the satisfaction level of the 2023 Suncheon Bay International Garden Expo was higher than that of the 2013 Suncheon Bay International Garden Expo. As the longest international event held since the COVID-19 pandemic, it reflected the citizens' demand for healing and recharging in natural spaces. Second, as a result of comparing the types of perceptions that affected satisfaction, it was found that economic, environmental, and ecological types commonly affected satisfaction at the 2013 and 2023 Suncheon Bay International Garden Expo. The 2013 Suncheon Bay International Garden Expo established the brand value as an "ecological city" by creating a garden in the city center along with an ecological resource called Suncheon Bay. In addition, the 2023 Suncheon Bay International Garden Expo expanded the scope of the garden to the entire city center. It also attempted to create a city where humans and nature coexist by realizing values, such as responding to climate change and carbon neutrality. In other words, one of the ways to secure urban competitiveness is to attract corporate investment and tourists and build a differentiated brand in Suncheon by promoting the 2023 fair based on the potential ecological values of the region after the 2013 Suncheon Bay International Garden Expo. Therefore, if the Suncheon Bay International Garden Expo continues to develop environmental and ecological content and programs in line with changes in society and tries to establish itself in citizens' perception through cooperation with local governments and residents, it will be able to establish its identity and brand power.

• Journal of Marine Life Science
• /
• v.8 no.2
• /
• pp.136-149
• /
• 2023

Basic bioactivities (antioxidant, anti-inflammatory, antibacterial, anticancer, antiviral) were investigated from 370 strains of marine bacteria, fungi, and microalgae obtained from various marine environmental regions in Korea, and the activity results were obtained at the collection site, isolation source, and species level was compared. In the case of marine bacteria, strains belonging to the generally useful genera Streptomyces and Bacillus were observed to have particularly strong efficacy and useful resources were mainly isolated from marine sediments. In the case of marine fungi and microalgae, results showing strong species-specific activity were confirmed, and results showing efficacy-specific activity were also obtained. Based on these results, it is a research result that can facilitate priority access as a strategic material for industrial revitalization and the establishment of a strategy to secure resources based on usefulness when conducting research on chemicals that are selectively effective against specific diseases or when conducting resource-based research. In addition, we believe that by using these results as material for sale through the Marine BioBank (MBB), academia and industry can use them to help accelerate the revitalization of the marine bio industry.

• Journal of Venture Innovation
• /
• v.5 no.4
• /
• pp.109-115
• /
• 2022

As the 4th industrial revolution progresses, foreign countries are promoting smart manufacturing innovation through digital transformation as a priority task early on to secure a competitive edge in the manufacturing industry. In response, the Korean government is also promoting a policy to enhance the competitiveness of small and medium-sized manufacturing companies by promoting digital transformation in the corporate sector to meet the global trend of the 4th industrial revolution era. Manufacturing powerhouses such as Germany and Japan see manufacturing as a key sector in digital transformation and are leading related policies, while emerging countries such as China are also promoting manufacturing innovation strategies such as building digital infrastructure and creating a digital innovation ecosystem. Korea is promoting the 'Korean-style smart factory dissemination and expansion strategy' by transforming Germany's manufacturing innovation strategy for smart factory supply to suit the domestic situation. However, the policy to supply smart factories so far has been conducted with support from individual companies under the leadership of the government, and most of the smart factories are at the basic level, and it is evaluated that there are limitations such as the lack of manpower to operate smart factories. In addition, while the current policy focuses on expanding the supply of smart factories in SMEs, it is necessary to establish a smart manufacturing system through linkages between large and small businesses in order to achieve the original goal of establishing a smart manufacturing system. Therefore, it can be said that from the standpoint of small and medium-sized enterprises (SMEs), who are consumers of smart factories, it can be said that the digital transformation policy can achieve the expected results only when appropriate incentives are provided for the introduction of smart factories in a situation where management resources such as funds, technology, and human resources are lacking. In addition, it is judged that the uncertainty of the performance of digital investment always exists, and as long as large and small companies are maintained as an ecosystem of delivery and subcontracting, there is very little incentive for small and medium-sized manufacturing companies to voluntarily invest in or advance digital transformation. Therefore, the digital transformation policy of small and medium-sized manufacturing companies in the future has practical significance in that it suggests that there is a need to seek ways to attract SMEs' digital-related voluntary investment.

• Journal of Nutrition and Health
• /
• v.56 no.5
• /
• pp.573-588
• /
• 2023

Purpose: This study aimed to examine social networking service (SNS) use and recommended information utilization (SURU) according to the food-related lifestyles (FRLs) of consumers and analyze how the interaction between the FRL and SURU affects the practice of eating alone and visiting restaurants. Methods: Data on 4,624 adults in their 20s to 50s were collected from the 2021 Consumer Behavior Survey for Food. Statistical methods included factor analysis, K-means cluster analysis, the complex samples general linear model, the complex samples Rao-Scott χ² test, and the general linear model. Results: The following three factors were extracted from the FRL data: Convenience pursuit, rational consumption pursuit, and gastronomy pursuit, and the subjects were classified into three groups, namely the rational consumption, convenient gastronomy, and smart gourmet groups. An examination of the difference in SURU according to the FRL showed that the smart gourmet group had the highest score. The result of analyzing the effects of the FRL and SURU on eating alone revealed that both the main effect and the interaction effect were significant (p < 0.01, p < 0.001). The higher the SURU, the higher the frequency of eating alone in the convenience pursuit, and gastronomy pursuit groups. The main and interaction effects of the FRL and SURU on the frequency of eating out were also significant (p < 0.01, p < 0.001). In all the FRL groups, the higher the SURU level, the higher the frequency of visiting restaurants. Specifically, the two groups with convenience and gastronomic tendencies showed a steeper increase. Conclusion: This study provides important basic data for research on consumer behavior related to food SNS, market segmentation of restaurant consumers, and development of marketing strategies using SNS in the future.