• 보존과학회지
• /
• 제33권1호
• /
• pp.25-33
• /
• 2017

보은 법주사 사천왕석등의 주부재는 K-장석이 반상조직을 보이는 티탄철석계열의 흑운모 화강섬록암 석재이며, 땅 속에 묻혀있던 알칼리 화강암 재질의 하대하석 및 지대석이 복원되며 본래의 모습을 되찾았다. 석등에는 균열 및 탈락에 의한 손상이 두드러지게 발생하였으며 이외에도 변색, 염 침착 및 생물 착생 등이 관찰된다. 특히 화사석의 전면과 후면을 관통하는 균열과 수평 불균형으로 인해 물리 및 구조적 안정성이 취약한 상태이다. 이에 따라 티타늄 보강재의 위치, 규격 및 정착 길이를 산정하여 구조적 보강을 실시하였다. 화학 및 생물학적 오염물은 석재에 손상을 주지 않는 한도 내에서 세정하고 산화된 철편을 티타늄제로 교체하였다. 또한 에틸 실리케이트계 강화제를 도포하여 암석의 강화와 원활한 수분 배출을 유도하였다.

• 한국결정성장학회지
• /
• 제28권3호
• /
• pp.130-134
• /
• 2018

솔더(solder) 재료는 수 천년 이상 인류 문명과 함께해온 대표적인 금속 합금으로서 현재까지도 전자 패키징(electronic packaging) 및 표면 실장(SMT, surface mount technology) 분야의 핵심 소재로 사용되고 있다 그러나 최근 Ag 가격의 급격한 상승과 전자산업의 저가격화 전략으로 인해 솔더 재료에서의 Ag 함량의 감소가 지속적으로 요구되고 있다. 본 연구에서는 Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu(weight%) 조성의 무연납 솔더바 샘플을 주조법으로 합금화 하였다. 제조한 Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu 샘플에 대한 결정구조, 화학조성 및 미세구조를 XRD, XRF, 광학현미경, FE-SEM 및 EDS 분석을 이용하여 조사하였다. 분석결과, 제조된 샘플은 ${\beta}-Sn$, ${\varepsilon}-Ag_3Sn$ 및 ${\eta}-Cu_6Sn_5$ 결정으로 구성되어 있었을 확인할 수 있었다.

• 폴리머
• /
• 제37권5호
• /
• pp.632-637
• /
• 2013

늑연골세포는 초기 증식능력이 관절연골세포보다 우수하며, 또한 세포 채취에 용이하다는 장점이 있어, 관절연골의 대안으로 사용된다. FDA의 승인을 받은 합성고분자인 폴리락산-글리콜산 공중합체(PLGA)는 조직공학적 생체재료로 사용되고 있으나, 세포 부착률이 낮고, 염증반응을 야기시킨다고 보고되고 있다. 본 연구에서는 세포의 증식에 영향을 주며 염증반응이 감소된다고 보고된 탈미네랄골분(DBP)을 이용하여, 함량별 DBP/PLGA를 제조한 뒤, 세포를 파종하여 연구를 실시하였다. 세포의 부착 및 증식률을 측정하기 위하여 세포 파종한 후 MTT와 SEM 분석을 수행하였으며, DBP가 세포외 기질 형성에 미치는 영향을 확인하고자 글리코스아미노글라이칸(sGAG)과 콜라겐 함량을 측정하였다. 생체 내 외 환경에서 세포의 부착과 증식에 미치는 영향을 관찰하기 위해 연구를 진행하여, PLGA 지지체보다 DBP/PLGA 지지체가 세포의 성장과 증식에 영향을 주는 것을 확인하였으며, DBP의 함량이 증가할수록 효과가 좋은 것으로 나타났다.

• 한국건설순환자원학회논문집
• /
• 제3권4호
• /
• pp.348-354
• /
• 2015

현재 국내에서 가장 많이 시공되고 있는 우레탄 방수재는 시공이 간편하고 이음매 없이 도막을 만들 수 있다는 장점을 가지고 있지만, 저온 및 낮은 습도에서 경화지연 및 도막 두께의 제한과 같은 결점이 있어서 현장 시공 시에 물을 강제적으로 혼합하여 경화시키는 방법인 수경화성 폴리우레탄 방수재가 해결방안으로 제시되고 있다. 하지만, 수경화성 폴리우레탄 방수재는 경화제로 사용하는 물 혼합비에 따라 방수성능 및 현장 시공성에 어떠한 영향을 주게 되는지에 대한 객관적이고 정량적인 평가가 없는 실정이다. 따라서 시공현장에서는 객관적인 기준 없이 작업자의 판단에 따라 물을 혼합하여 시공하고 있어서 일정한 성능과 품질을 얻을 수 없는 문제점이 있다. 따라서, 본 연구에서는 수경화성 폴리우레탄 방수재가 폭 넓게 적용되는 계기를 만들기 위하여, 물 혼합비에 따른 성능의 변화를 정량적인 근거를 바탕으로 평가, 분석하여 적정한 물 혼합비 제안을 위한 기초적 자료를 마련하기 위해 진행하였다. 연구의 방법은 수경화성 폴리우레탄 방수재의 물 혼합비(0%, 5%, 10%, 15%, 20%, 25%, 30%, 40%, 50%)에 따른 객관적 성능 평가를 통해 결과 값을 도출하고 비교 분석하여 혼합비별 물성변화 특성을 파악한 후 이를 데이터 베이스화 하여 가장 적정한 물 혼합비 제안을 위한 기초적인 자료로 활용 가능할 수 있도록 결과를 제시하였다.

• 대한치과보철학회지
• /
• 제43권2호
• /
• pp.191-203
• /
• 2005

Statement of problem. In Korea, the preliminary impression trays for dental and edentulous maxillae are manufactured on the base of the statistical value of Westerners. There had been less study on the dental and edentulous arches of Koreans. Purpose. The purpose of this study was to evaluate an average dental cast, preliminary impression trays, three-dimensional relation of dental and edentulous maxilla of Koreans Material and methods. The subjects for this study were 173 dental casts of maxilla (dental: 52, edentulous : 146) with ages $18\{\sim}60$ years old. Each of the master casts was measured 69 measuring points on the dental cast or maxilla, and 46 measuring points on the edentulous cast of maxilla with three-dimensional digital measuring machine. Each measuring points were analysed and were overlapped, that three dimensional dental graphic manufactured by CAD/CAM system. Results. 1. A standard of distribution to alveolar bone were width between left and right buccal border lines of the standard 3/4 line. The mean value of dental and edentulous casts were 67.27mm, 63.49mm respectively. 2. Morphological classification of dental casts were divided into three groups or V-shape, O-shape, U-shape, that proportion of distribution were 17%, 16%, 67%, respectively. Dimensional classification of the dental casts were divided into five groups of less than 63mm, 63 up to 65mm, 65 up to 67mm. 67 up to 69mm, more than 69mm, respectively. 3. Morphological classification of edentulous casts were divided into three groups or V-shape, O-shape, U-shape, that proportion of distribution were 18%, 17%, 65%, respectively Dimensional classification of the edentulous casts were divided into five groups of less than 57mm, 57 up to 61mm, 61 up to 65mm, 65 up to 69mm, more than 69mm, respectively. 4. Mean dental and edentulous cast of maxilla were overlapped, the proportion of bone resorption to alveolar bone is higher than that of palatal bone, its difference were higher anterior 2/4 area than posterior 3/4 area. Conclusion. It obtains information of preliminary impression trays for dental and edentulous maxilla of Koreans.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.362-374
• /
• 2007

Statement of problem. The intial stability for osseointegration of implant has been an interesting factor. Especially, in the case of poor bone quality or immediately loaded implant, various strategies have been developed focusing on the surface of materials to improve implant fixation to bone. The microscopic properties of implant surfaces play a major role in the osseous healing of dental implants. Purpose. The aims of this study are to perform a histologic and histomorphometric comparison of the healing characteristics of three different surfaces and the comparison of resonance frequency analysis (RFA) values measured by $Osstell^{TM}$ and perio-test values (PTV) measured by Periotest. Material and methods. A total of 24 screw titanium implants (Dentium Co., Seoul, Korea) with 6mm in length and 3.4mm in diameter, were placed in the mandible of 4 beagle dogs. Implants were divided into three groups following the surface treatment methods: Group I is machined(control group). Group II is anodically oxidized. Group III is coated 500nm in thickness with hydroxyapatite(HA) by ion beam assisted deposition(IBAD) on the anodized oxidization. Bone blocks from 2 dogs were caught after 3 weeks of covered healing and another blocks from 2 dogs after 6 weeks. RFA values and PTV were measured right after insertion and at 3 and 6weeks. Histomorphometric analysis was made with Kappa Image Base System to calculate bone-to-implant contact (BIC) and bone area inside the threads. Pearson's correlation analyses were performed to evaluate the correlation between RFA and PTV, BIC and bone area ratio of three different surfaces at 3 and 6 weeks. Results. 1) In all surface treatment methods, the RFA values decreased and the PTV values increased until 6 weeks in comparison to initial values. 2) At 3 weeks, no significant difference was found from bone-to-implant contact ratio and bone area ratio of three different surface treatment methods(P>0.05). However, at 6 weeks, different surface treatment methods showed significantly different bone-toimplant contact ratio and bone area ratio(P<0.05). 3) In the implants with the IBAD on the anodic oxidization, significant difference was found between the 3 weeks and the 6 weeks bone area ratio(P<0.05). 4) Correlation was found between the RFA values and the bone area ratio at 3 and 6 weeks with significant difference(P<0.05). Conclusions. These results indicate that the implants with the IBAD on the anodic oxidization may have a high influence on the initial stability of implant.

• The Journal of Advanced Prosthodontics
• /
• 제12권2호
• /
• pp.100-106
• /
• 2020

PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.224-232
• /
• 2012

Although evolution of construction materials brought about development of modern architecture, they caused destruction of the environment and pollution. This problem is not a new one in terms of ecological esthetics and materials of sustainable architecture in light of the Eastern view of nature and this idea became a background of this study. The basic concept is to try to find out their characteristics from a perspective of ecological esthetics in relation to traditional building materials that nature, architecture, and humans coexist and live with each other to balance. Based on ecological esthetics and precedent studies on materials of traditional architecture, we investigated connections, expressive methods and characteristics in traditional residential construction space. This attempt has meanings in that it can propose a new framework of forming various viewpoints and spatial perceptions in relation to esthetics and traditional construction materials. The current study examined the characteristics by dividing them into tangible and intangible elements based on expressive features of elements of nature. The characteristics found by this process are not simply notion of physical materials, but plays a key role aesthetically and ecologically. Nature and materials take circulation of the law of nature, regulate energy, increase efficiency and play a major role in an economic way. Nature in itself becomes natural alternative energy, and plays its role in an invisible fashion. It examined how expressive characteristics of construction materials are reflected through analyzing residential space and Korean traditional garden having relationships with Eastern viewpoint of nature in relation to Korean traditional construction materials from a perspective of ecological esthetics. Findings of the above study indicate that expressive characteristics of Korean traditional construction materials from a perspective of ecological esthetics are that nature, space, humans coexist and live together and they will provide a clue to an alternative to solve ecological and environmental problems modern society will have in the future. Through this process, it provided a possibility that traditional space and materials can be succeeded in creative and new ways, and it found out the way for nature, space, and humans to coexist and a possibility of ecological esthetics. It addition, it will provide a key base as an alternative of sustainable design of the future.

• 플랜트 저널
• /
• 제10권2호
• /
• pp.48-59
• /
• 2014

본 연구에서는 고온 고압 배관용 단조밸브 용접부의 품질확보를 위하여 단조밸브 제작현장에서 활용할 용접후열처리의 유지시간 및 유지온도를 연구했다. ASTM A182 F92 재료를 단조밸브의 용접부에 해당되는 밸브 끝단부 및 누설방지용접부와 동일한 형상의 두께 1 inch 쿠폰으로 가공하고, 쿠폰을 가스 텅스텐 아크용접(GTAW: Gas Tungsten Arc Welding) 방법으로 완전용입 용접하여 시편을 제작했다. 용접부 호칭두께가 1 inch인 시편을 $705^{\circ}C$, $735^{\circ}C$, $750^{\circ}C$, $765^{\circ}C$, $795^{\circ}C$ 및 $825^{\circ}C$에서 1시간 유지하여 용접후열처리를 실시(Group 1)하였다. 그리고 용접부 호칭두께가 1 inch인 시편 3개를 $735^{\circ}C$에서 30분, 1시간 및 2시간으로 달리 유지(Group 2)하여 용접후열처리를 실시하였다. 다른 유지시간과 유지온도에 따른 경도의 변화를 관찰하기 위하여 모재부, 열영향부 및 용착금속부에서 경도를 측정하였다. 본 실험의 결과에 따라, 1 inch당 1시간 온도를 유지할 경우는 용접후열처리가 $750^{\circ}C{\sim}765^{\circ}C$에서 수행되어야 바람직한 것으로 확인되었다. 단조밸브 제작규격에서 요구하는 최소 유지온도 보다 $5^{\circ}C$가 높은 $735^{\circ}C$에서 1 inch당 1시간 유지할 경우에 요구된 경도 값을 만족하지 못하여, 요건보다 긴 시간인 1 inch당 2시간 용접후열처리 시 경도 값을 만족하는 것으로 확인되었다. 또한 용착금속부의 조직은 템퍼드-마르텐사이트 조직으로 확인되었다.

• 치과방사선
• /
• 제26권2호
• /
• pp.133-145
• /
• 1996

Aspirating or swallowing foreign bodies is a common occurrence. If they are wholly or partly radiopaque, their localization in and progress through the gastrointestinal tract can be more effective. Of the dental origin foreign materials swallowed, the most common things are fragments of anterior maxillary partial denture. But the radiopacity of denture base resins is not sufficient to determine the location of the objects. The purpose of this study was to develop a radiopaque dental acrylic resin, which has clinically detectible radiopacity with minimal change of mechanical properties and color. The radiopacity, color change(CIE 6..E) and microhardness of acrylic resins were determined after mixing barium sulfate or iodide compound. Thermocycling course was conducted to determine the change of characteristic of resins after using for a long time in the mouth. Five or ten percent of barium sulfate to total weight of cured material was mixed with heat curing dental acrylic resin or chemically curing orthodontic resin. In the case of iodide compound, the mixing ratio was two or three percent. After mixing the high radiopaque materials, resin was cured to 20×20×2 mm plate, polished with #600 sand paper and finally polished with Microcloth(Buehler). The specimens were thermocycled in 5 and 55 t distilled water for 2,000 times, and the measurement of radiopacity, color and Vickers hardness was repeated every 500 times thcrmocycling. The radiopacity of specimens on the X -ray films was measured with densitometer(X-rite). The color change was detennined with differential colorimeter(Model TC-6FX, Tokyo Denshoku), and the Vickers hardness number was measured with microhardness tester(Mitsuzawa). The following results were obtained : 1. All the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, had combined effect on the radiopacity of the dental acrylic resins(p<0.0l). 2. The two variables, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of the dental acrylic resins(p<0.01). But the kinds of acrylic resins did not influence on the color change of mixed dental acrylic resins(p>0.05). 3. Each of the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of dental acrylic resins(p<0.0l). 4. The high radiopaque materials used in this study did not yield clinically usable radiopacity, and the color change was great after mixing those materials.