• Journal of Korean Society of Forest Science
• /
• v.107 no.1
• /
• pp.81-95
• /
• 2018

Camp Page, To minimize the negative impacts such as the contraction of the local economy and the reduction of community activities, it has designated Baekdudaegan as protect area since September 2005, also the Korea Forest Service has implemented Support Project for National Income. However, the fundamental purpose and linkage called protection of Baekdudaegan is in lacking status, also various problems were also corrected such as indiscretion business application. For this, the purpose of this research is to provide improvement method by analyzing the problems of support project for national income of Baekdudaegan through a literature research and questionnaires of the responsible officers. First, as the research results, the strengthening sense of responsibility for Baekdudaegan supporting project for National by developing the local nationals as the Baekdudaegan's protection and management agent. Second, think the local nationals as the part of Baekdudaegan and there is need for development of system that can keep income as well as culture with community. Third, By constructing governance that the local nationals and administrations can cooperate, the area activation shall be realized through the Baekdudaegan's symmetric protection and management. The research like this, ban be used as base material of business promotion that consists area development and nationals of development restricted area while protecting the Bekdudaegan later.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.128-139
• /
• 2020

The purpose The purpose of this study was to compare and observe research trends of sex education for young children·elementary school students·middle school students, provide base material for research on sex education, and present research prospects and tasks for the future. For this, 30 theses from Korean journals related to sex education for young children·elementary school students·middle school students from years 2000 to 2019 were extracted and analysis was conducted on the general trends (by research period and by academic field) of sex education and they were categorized by research topic, by research subject, and by research method. Research results showed that, with research period, research increased in the mid-2000s and with journal trends by research subject, and was published in 24 journals. Second, with regard to research topic aspects, most studies looked into 'sex education perceptions and conditions' and research dealing with 'gender concept development' and 'program development and teaching method strategies' also increased. Third, in terms of the research subjects, there were 9 papers for children, 6 papers for elementary students, 14 papers for middle school students, 2 for high school students, and 9 papers for teachers and parents. Fourth, with trends according to research methods, the quantitative research method of 'questionnaires' was used most and following were 'literary studies' and 'interviews', in that order. Reflecting these research results, discussions were presented and proposals for future studies were made.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.2
• /
• pp.137-144
• /
• 2016

The ultimate research goal of the current study was a development of hydrolyzed whey protein powder (7%-GNANA) manufactured with normal content of sialic acid, a marker compound, that is naturally occurring at 7% concentration in GMP obtained from the milk protein. GMP is a safe food, used worldwide in infant and baby foods, etc. The test substance was prepared using (7% sialic acid containing) GMP as a raw material, and then using alcalase, an enzyme approved as a food additive, after separation of sialic acid with 100% efficiency and 7%-GNANA (containing 7% sialic acid and protein; product name: HELICOBACTROL-7) provided by MEDINUTROL Inc. (Korea). Bacterial reverse mutation (Ames) test was conducted in accordance with GLP Guideline using the test substance specified above. To identify its mutagenic potential against microorganisms, histidine auxotrophic strains of Salmonella Typhimurium, TA98, TA100, TA1535, and TA1537, and tryptophan auxotrophic strain of Escherichia coli, WP2uvrA, were used. The bacterial reverse mutation (Ames) test was performed by dividing the test substances into five different concentration groups (0, 61.7, 185, 556, 1,670, $5,000{\mu}g/plate$). Results of this experiment did not reveal repetitive increase of colony generating values or positive criteria for reverse mutagenicity for any concentration of test substances in any of the five strains, regardless of the presence of a metabolic activation system, and no dose-dependency was identified. In conclusion, the safety of 7%-GNANA test substance was verified by bacterial reverse mutation test conducted before registration of 7%-GNANA as a food additive.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.146-156
• /
• 1998

Fly ash produced in coal combustion is a fine-grained material consisting mostly of spherical, glassy, and porous particles. A physical, morphological, and chemical characteristic of fly ash has been analyzed. This study may contribute to the data base of domestic fly ash, the improvement of combustion efficiency, ash recycling and ash collection in the electrostatic precipitator. The physical property of fly ash is determined using a particle counter for the measurement of ash size distribution and gravimeter. Morphological characteristic of fly ash is performed using a scanning electron micrograph and an optical microscope. The chemical components of fly ash are determined using an inductively coupled plasma emission spectrometry (ICP). The distribution of fly ash size was ranged from 15 to 25 $\mu$m in mass median diameter. Exposure conditions of flue gas temperature and duration within the combustion zone of the boiler played an important role on the morphological properties of the fly ash such as shape, relative opacity, coloration, cenosphere and plerosphere. The spherical fly ash might be generated at the condition of complete combustion. The size of fly ash was found to be increased the with particle-particle interaction of agglomeration and coagulation. Fly ash consisted of $SiO_2\;Al_2O_3\;and\;Fe_2O_3$ with 85% and carbon with 3~10% of total mass.

• Clinics in Shoulder and Elbow
• /
• v.11 no.1
• /
• pp.46-52
• /
• 2008

Purpose: This study examined the outcomes of reconstruction of the coracoclavicular ligaments with using two suture anchors and performing coracoacromial ligament transfer in patients with acromioclavicular dislocation. Material and methods: Forty patients with complete acromioclavicular dislocation were included in this study. According to the preoperative radiographs, 5 patients with AC dislocations were diagnosed as type III, 4 patients as type IV and 31 patients as type V. Two 3.5mm suture anchors with four strands of nonabsorbable sutures were separately placed on the anterolateral and posteromedial portion of the base of the coracoid process to stabilize the distal clavicle. The coracoacromial ligament was then transferred to the undersurface of the distal end of the clavicle for augmentation. Results: At a mean follow-up of 28 months, the average Constant score improved to 97 points. All the patients returned to normal life at an average of 3.2 months postoperatively. At the last follow-up, 37 patients achieved anatomical reduction and three patients showed complete redislocation. However, the clinical results of the patients with redislocation were satisfactory. Conclusion: Anatomical coracoclavicular reconstruction using two suture anchors and coracoacromial ligament transfer for treating complete acromioclavicular dislocation is a safe, effective procedure for restoring a physiologically stable acromioclavicular joint.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.63-70
• /
• 2005

The purpose of this study was to investigate how to modify the physical properties of cellulose after thermal treatment. Cellulose was treated between $225^{\circ}C$ and $325^{\circ}C$ for 3 hrs under air flow, and then the thermally treated cellulose was measured to specific surface area, constitute elements, consumption ofacid and base, as well as the adsorption capacity of ethylamine vapor. The higher was the treating temperature from $225^{\circ}C$ to $325^{\circ}C$, the lower was the total yield of cellulose. Elemental analysis revealed that carbon content in thermally treated cellulose was gradually increased in proportion to temperature increment. The amount of acidic functional groups tended to increase up to $300^{\circ}C$, after then to be lowered slightly. In principle, no alkaline functional groups were found in thermally treated cellulose. In case of treatment with $325^{\circ}C$, only a few amount of alkaline functional groups were detectable. Specific surface area of thermally treated cellulose are determined to $1.9m^2/g$, which value can become higher when the treated temperature rises. The thermally treated cellulose at $275^{\circ}C$ shows the highest adsorption capacity of ethylamine at $40^{\circ}C$ for 4 hrs. Solubility of those two celluloses with WPG (Weight Percent Gain) value of 113% and 108%, respectively, was determined to almost 100%. X-ray diffractogram of thermally treated cellulose suggested that the crystalline structure of cellulose began to be destroyed at the temperature of $275^{\circ}C$. As a conclusion, changes of such a physical properties make it possible to weaken inter and/or intra hydrogen bond in crystal region of cellulose macromolecules. When thermally treated cellulose adsorbs ethylamine, it turns to be well soluble to water.

• Fire Science and Engineering
• /
• v.23 no.4
• /
• pp.32-39
• /
• 2009

In this study, 18 plots were selected for particular investigation on Gangneung area and Samcheok area and Uljin area, where forest fire was occurred after thinning in 2007. After selection, a relationship between a damage of forest fire and thinning were compared and analyzed. Many factor such as a damaged species, a thinning or non-thinning, a direction of forest fire head, DBH, a height of tree, a mortality of tree, a leeward scorching ratio, a crown damage ratio, a forest tree standing crop density, a crown base height, a leaving of thinning slash, a location of plot (GPS), elevation, an aspect of slope, an angle of slope, and a topography were measured. Therefore, we analyzed a relationship with forest fire. In the result of this analysis, it was founded that the leeward scorching ratio was 24.7% on thinning area whereas 60.2% on non-thinning area. Subsequently, leeward scorching ratio on thinning area was increased by about 35.5% more than on non-thinning area. In the result of analysis about tree species, a forest of pine tree was more damaged than forest of oak tree. The mortality of tree was increased by about 41.4% on non-thinning area. When stands were close to thinning slashes, these were more damaged by 10${\sim}$20% than other stands for increasing of amount of a combustion material. Especially, as potential of re-ignition increased for more cumulated thinning slash, it will be more important to require a method for a periodical removing or practical utilization of slash.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.352-358
• /
• 2019

In recent years, printing paper with a function of information delivery and aesthetic value has attracted a great attention with increasing market demand for coated paper that is capable of high quality printing. The coated paper for inkjet printing with high-quality of photorealistic grades requires the coating layer with a good wettability and porous surface structure in order to improve the printability of ink. In this study, the coated paper was prepared using polyvinyl alcohol (PVA) and surface treated nano silica sol with silane coupling agent. It was confirmed that the coating layer with surface treated nano silica sol showed a uniform pore distribution and flat surface roughness. Glossiness of the prepared printing paper was similar to that of commercial high quality photo paper. Especially, the coated paper with surface treated nano silica sol showed improved printability with excellent roundness of the printed dot of ink. These results indicates that the coating layer with excellent wettability and uniform pore distribution can be formed by using the nano-silica particles with improved dispersibility through the surface treatment of the silane coupling agent.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.10 no.1
• /
• pp.96-107
• /
• 2003

Objective: The purpose of this study was to identify the effects of tracheal suction and the effects of different methods of bronchodilator inhalation (Ultrasonic nebulizer: MDI puff, MDI puff with spacer) in VSD surgery patients. Material & Method: From June 2001 to March 2002, sixty consecutive patients were randomly assigned to a control group (n= 15), ultrasonic nebulizer group (n=15), metered dose inhalation (MDI) puff group (n=15) and MDI with spacer group (n=15). Vital signs (HR, BP, CVP), ABGA and pulmonary functions were measured before suction (baseline for suction), after suction, 15 minutes after suction (base of bronchodilator inhalation), 30 minutes after bronchodilator inhalation, and 2 hours after bronchodilator inhalation. Stastistical analysis was performed using SPSS software. Repeated measure ANOVA was used to examine the effects of tracheal suction. One way ANOVA with Bonferroni's correction and multiple range test (the least significant difference test) were used to examine the effects of albuterol inhalation. Result: 1. Heart .ate increased significantly immediately after suction (p<.01) and recovered 15 minutes after suction. 2. $PaO_2$ and PH decreased significantly immediately after suction (p<.05) and $PaO_2$ recovered 15 minutes after suction. $PaCO_2$ increased immediately after suction and significantly 15 minutes after suction (p<.01). But changes in vital signs and ABGA were within the normal range. 3. Tidal volume decreased significantly 15 minutes after suction (p<.05). 4. Changes of HR and tidal volume were greater in the nebuizer group compared to the other groups (p<.05) 30 minutes after bronchodilator inhalation and recovered 2 hours after bronchodilator inhalation. 5. Changes of airway deadspace was greater in the nebulizer group compared to the control group and MDI puff group 30 minutes after albuterol inhalation (p<.05) and at 2 hours (p<.01). Conclusion: Tracheal suction did not have significant effect on vital signs and pulmonary functions after OHS. Although the methods of bronchodilator inhalation did not showed any significant difference on pulmonary function, the nebulizer method increased $PaO_2$ (20%) and tidal volume transiently. If the patient needs bronchodilator inhalation with bronchospasm after OHS, the nebulizer method is the best choice. More study on the effects of bronchodilator inhalation in bronchospasm group is needed.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.543-551
• /
• 2012

Road pavements in Korea generally show shorter service life than the predicted one. There are many reasons for this phenomenon including increased traffic load and other attacks from exposure conditions. In order to extend a service life and upgrade the pavement, a new multi-functional composite pavement system is being developed in Korea. This study is to investigate the performances of fiber-reinforced lean concrete for pavement base. This study considered mineral admixtures of fly ash and reject ash. The reject ash is defined as ash that does not meet the specifications for fly ash so that it cannot be used as a supplemental material for cement replacement. Due to the inherent property of lean concrete, compaction during the fabrication of specimens is a key factor. Therefore, this study suggests an appropriate compaction method. From the test results, the compressive strengths of the concrete satisfied the required limit of 5 MPa at 7 days. When a compaction roller was used to mimic actual field conditions, the strength development seemed to be influenced by the compaction energy rather than hydration of cement itself.