• Journal of Hydrogen and New Energy
• /
• v.29 no.4
• /
• pp.324-330
• /
• 2018

In this study a numerical study was conducted to show flow, temperature and gas distributions in a high temperature CO shift reactor which was designed specially for energy saving and then evaluated with the related experiment. Mole fractions of syngas at the end of the catalyst bed were predicted with various assumed pre-exponential factors, were compared with the corresponding experimental results and $10^8$ was finally selected as the value. With the selection, a base case was examined. It was calculated that the inlet duct attached asymmetrically to the CO shift reactor affects on the distribution of the upward momentum (+z directional). In addition, CO conversion ratio is achieved up to 90% in the catalyst bed and especially it reached up to 70% at the initial part of catalyst bed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.1
• /
• pp.117-123
• /
• 2001

In present study a methodology has been developed and applied for the optimum design and performance evaluation of microchannel heat sinks. The optimum design parameters include channel number and fin thickness. For a trial model of 127mm in length, 52.5mm in width, 16mm in height and 2.5mm in base thickness, the optimum channel number and the fin thinckness have been determined to be of 194 and 0.08359mm, respectively in laminar flow region. Performance of the optimally designed microchannel heat sinks has been compared with those having 50% and 150% of the number of channels. The results showed that the 50% and 150% designs increased the pumping power by 200% and 150%, respectively.

• Korean Journal of Acupuncture
• /
• v.21 no.1
• /
• pp.129-147
• /
• 2004

Objectives and methods : This research aims to study about conversion system of channels. In the present study, we investigated the movement and conversion of channels on the base of three step theory(三才論), Yeak(易), Hado.Laksea(河圖洛書) and five elements motion and six kinds of factors(Six-Qi). Results and Conclusions : The organization of meridian is composed of the following three parts: hand and foot, Yin and Yang, and the viscera and bowals. It is play an important role in energy flow and its conversion. The law governing energy conversion is divided into three groups i.e. taiyin-yangming channel, shaoyin-taiyang channel and jueyin-shaoyang channel group. Those are composed of Deadea(對待) of Six-Qi, making the body homeostasis. Taken together, we suggest that the conversion system of meridian is founded on the unity between the human body and nature which provides the medical workers with a necessary method of thinking in treating diseases.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.78-86
• /
• 2013

In this research, dilute colloidal suspension alumina nanofluids were prepared by dispersing alumina nanoparticles in DI water and ethylene glycol as base fluids. Particle size analyzer and TEM test results revealed that the size of the alumina nanofluids(3wt% and 5wt%) with dispersion time 3hrs were 46nm and 60nm respectively. Thermal conductivity of these alumina nanofluids was measured by means of hot wire technique using a LAMBDA system. For water based alumina nanofluids, thermal conductivity enhancement was from 2.29% to 3.06% with 5wt% alumina at temperatures ranging from 15 to $40^{\circ}C$. Whereas in case of ethylene glycol based alumina nanofluids under the same temperature range, thermal conductivity enhancement was from 9.6% to 10% with 5wt% alumina. An enhancement of 37% average convective heat transfer was achieved with 5wt% alumina nanofluids at Re of 1,100.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.412-422
• /
• 1999

Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

• Journal of Hydrogen and New Energy
• /
• v.24 no.5
• /
• pp.444-450
• /
• 2013

The distribution performance of refrigerant distributors in air conditioner evaporators was examined numerically and experimentally. Internal flow analysis of the distributor by CFD found that the distance from the socket to the cone, the angle of the cone and the base area of the cone were the most important factors affecting refrigerant distribution ability and vortex creation. To enhance distribution performance, two distributors with improved internal structures were designed. To test these new structures, distribution performance was also analyzed by CFD and an empirical experiment was carried out using the water-nitrogen. Experimental results on the distribution fraction of each distributor hole showed a good agreement with the results of the CFD analysis. Thus, the new design of the distributors enhanced distribution performance of the refrigerant distributors.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.153-154
• /
• 2008

This paper presents a window-based software package for the education and training for the reduction of power system by using locational marginal price (LMP), clustering, and similarity indices of each bus. The developed package consists of three modules: 1) the LMP module, 2) the Clustering module and 3) the Reduction module. Each module has a separated and interactive interface window. First of all, LMPs are created in the LMP module, and then the Clustering module carries out clustering based on the results of the LMP module. Finally, groups created in this Clustering module are reduced by using the similarity indices of each bus. The developed package displays a variety of tables for results of the LMPs of base network, voltages, phases and power flow of reduced network so that the user can easily understand the reduction of network. To demonstrate the performance of the developed package, it is tested for the IEEE 39-bus power system.

• Architectural research
• /
• v.15 no.2
• /
• pp.87-94
• /
• 2013

Throughout the history of architecture, sometimes the main focus of design was determined by a particular visual representation method, and other times a particular form of visual representation method was required by perception of a particular architectural issue or an architectural form or idea. That is why the visual representation method of architects becomes an important means of reading the flow of idea and thinking behind architecture. This study is an investigation on the relation between architectural thinking and visual representation method expressed through the conceptual drawings by avant-garde architects of the 1970s and 80s, a period of the emergence of postmodernism. Rather than proving the objective reality regarded important by traditional architectural drawing, attempts are made to express the design concept in which the project has its base. Such interpretation and explanation regarding the concept become the main interest of the drawing. It is not that the architecture itself was not expressed in the contents, but it may not be the main subject of expression in the drawing. The value of architectural drawing recovers its value as an art work in itself, as a means of communication, and as an important conceptual tool in the design process. It can be seen that the visual representation method in postmodern architectural drawings is breaking free of the traditional objective depiction of matter and is changing and developing as a design tool of the architect.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.288-291
• /
• 2008

Recently, the importance and necessity of engineering analysis has shown a steady growth. However, researchers working in small and medium enterprises know little about the usefulness of engineering analysis and suffer from lack of technical knowledge. Axial fan is air fluid machinery in various fields of industry such as automobile, electric appliance, and heavy machinery. It is also a time and budget consuming equipment to develop the axial fan through physical experiments. In order to overcome this problem, we have designed and developed a web-base automated simulator for axial fan's fluid analysis using supercomputer. Automated simulator means that all of processes for engineering analysis including pre-process, solving, and post-process can be performed automatically without user intervention after transferring fan model(CAD files) made by user. After executing the simulator with some parameters, user can receive the report including pressure P and flow rate Q. In this paper, we introduce the architecture of our easy and efficient automated engineering analysis simulator, related techniques and result of development.

• Journal of The Korean Association of Information Education
• /
• v.7 no.3
• /
• pp.309-317
• /
• 2003

Web-Based Education System changed from one side transmission of information to bi-directional information exchange with user. Accordingly, It had been implemented on 3-tier models with each function separation using database and server side language such as CGI (Common Gateway Interface). But, The CBSD(Component Based Software Development) techniques receives many interests recently, and efforts to apply this are appearing. Thus, In this research implemented component base question solving system. For this, I used EJB(Enterprise Java Beans) that is web server component model, and used Petri-Net for typical specification about message flow between components.