DOI QR코드

DOI QR Code

Numerical Study on High Temperature CO-Shift Reactor in IGFC

고온수소 전환 반응기에 관한 수치해석적 연구

  • SEO, DONG-KYUN (Clean Combustion Group, Clean Power Generation Laboratory) ;
  • LEE, JIN-HYANG (Clean Combustion Group, Clean Power Generation Laboratory) ;
  • CHI, JUN-HWA (Clean Combustion Group, Clean Power Generation Laboratory) ;
  • HONG, JIN-PYO (Clean Combustion Group, Clean Power Generation Laboratory) ;
  • OH, SUK-IN (C-Energy)
  • 서동균 (한국전력공사 전력연구원) ;
  • 이진향 (한국전력공사 전력연구원) ;
  • 지준화 (한국전력공사 전력연구원) ;
  • 홍진표 (한국전력공사 전력연구원) ;
  • 오석인 ((주) 씨에너지)
  • Received : 2018.07.05
  • Accepted : 2018.08.31
  • Published : 2018.08.31

Abstract

In this study a numerical study was conducted to show flow, temperature and gas distributions in a high temperature CO shift reactor which was designed specially for energy saving and then evaluated with the related experiment. Mole fractions of syngas at the end of the catalyst bed were predicted with various assumed pre-exponential factors, were compared with the corresponding experimental results and $10^8$ was finally selected as the value. With the selection, a base case was examined. It was calculated that the inlet duct attached asymmetrically to the CO shift reactor affects on the distribution of the upward momentum (+z directional). In addition, CO conversion ratio is achieved up to 90% in the catalyst bed and especially it reached up to 70% at the initial part of catalyst bed.

Keywords

References

  1. "8th Basic Plan for Electricity Supply and Demand", 2017.
  2. S. H. Kim, P. Victor, J. H. Yoo, S, H, Lee, Y. J. Rhim, J. H. Lim, S. D. Kim, D. H. Chun, and H. K. Choi, "Comparative Evaluation of Steam Gasification Reactivity of Indonesian Low Rank Coals", Trans. of the Korean Hydrogen and New Energy Society, Vol. 27, No. 6, pp. 693-701. https://doi.org/10.7316/KHNES.2016.27.6.693
  3. "Commercialization Status of SOFC", Korea Gas News Paper, Vol. 1271, 2016.
  4. D. S. Newsome, "The water gas shift reaction", Catalysis Reviews Science and Engineering, Vol. 21, No. 2, 1980, pp. 275-318. https://doi.org/10.1080/03602458008067535
  5. B. A. Haberman and J. B. Young, "Three-dimensional simulation of chemically reacting gas flows in the porous support structure of an integrated-planar solid oxide fuel cell", International Journal of Heat and Mass Transfer, Vol. 47, 2004, pp. 3617-3629. https://doi.org/10.1016/j.ijheatmasstransfer.2004.04.010
  6. W. H. Chen, M. R. Lin, T. L. Jiang, and M. H. Chen, "Modeling and simulation of hydrogen generation from high temperature and low temperature water shift reactions", International Journal of Hydrogen Energy, Vol. 33, No. 22, 2008, pp. 6644-6656. https://doi.org/10.1016/j.ijhydene.2008.08.039
  7. S. Z. Saw and J. Nandong, "Simulation and control of water gas shift packed bed reactor with inter stage cooling", IOP Conference Series : Materials Science and Engineering, Vol. 121, 2016.
  8. Y. S. Seo, D. J. Seo, Y. T. Seo, and W. L. Yoon, "Investigation of the characteristics of a compact steam reformer integrated with a water-gas shift reactor", Journal of Power Sources, Vol. 161, 2006, pp. 1208-1216. https://doi.org/10.1016/j.jpowsour.2006.05.039
  9. J. Park, Y. Choi, K. Kim, and M. Oh, "Rigorous modeling and simulation of multi-tubular reactor for water gas shift reaction", Korean Chem. Eng. Res., Vol. 46, 2008, pp. 931-937.
  10. D. K. Seo, I. K. Noh, J. H. Hwang, J. K. Choi, D. H. Shin, and H. S. Kim, "Effect of tip size and aspect ratio on reforming performance in a methane reformer for polymer electrolyte membrane fuel cell (PEMFC)", Trans. of the Korean Hydrogen and New Energy Society, Vol. 21, No 5, 2010, pp. 364-374.
  11. C. U. Yang, Y. H. Lee, S. G. Park, C. M. Yang, and S. J. Park, "Study on the design parameters of a heat exchange steam reformer (HESR) using CFD", Trans. of the Korean Hydrogen and New Energy Society, Vol. 27, No. 1, 2016, pp. 1-12. https://doi.org/10.7316/KHNES.2016.27.1.001
  12. J. Xu and G. F. Froment, "Methane steam reforming, methanation and water gas shift. I, intrinsic kinetics", American Institute of Chemical Engineers Journal, Vol. 35, No. 1, 1989, pp. 88-96. https://doi.org/10.1002/aic.690350109
  13. H. S. Choi, J. W. Kim, W. H. Kim, S. J. Kim, and D. J. Koh, "Optimization of reaction conditions for the high purity hydrogen production process using by-product gases in steel works", Trans. of the Korean Hydrogen and New Energy Society, Vol. 27, No. 6, 2016, pp. 621-627. https://doi.org/10.7316/KHNES.2016.27.6.621