• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.895-900
• /
• 2013

Several plasma spray and metallurgical surface coatings such as $Al_2O_3$, $Cr_2O_3$, WC-Ni, and chromizing coating have been examined for their application in environments with high temperature, wear, and corrosion. The chromizing coating is different from others coatings in the manufacturing process the surface. These coatings' characteristics were tested experimentally, and the results were compared. WC-Ni shows good performance against thermal barrier, wear, and corrosion and is one of the best candidates for the environment considered herein. These coatings were studied for their application in the steel manufacturing industry. The most commonly required functions in this industry are thermal and wear resistance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.496-501
• /
• 2009

Interior Permanent Magnet Synchronous Motor (IPMSM) produces two kind of torque that Magnetic and Reluctance torque. The permanent magnet linkage flux ${\Psi}_a$ and d-axis and q-axis inductances have an important influence on the torque characteristic of IPMSM. Thus their accurate prediction is essential for predicting performance aspect such as the torque and flux-weakening capabilities. In this paper, the influence of barrier width on the ${\Psi}_a$ and $L_d$, $L_q$ is calculated by FEM analysis. Predictions are validated by comparison the average torques, using Maxwell Stress Tensor method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.355-355
• /
• 2010

We studied the dependence of the performance of schottky barrier metal-oxide-field effect transistors(SB MOSFETs) on the work function of source/drain metals. A strong impact of the various work functions and the light wavelengths on the transistor characteristics is found and explained using experimental data. We used an insulator of a high thickness (100nm) and back gate issues in SOI substrate, subthreshold swing was measured to 300~400[mV/dec] comparing with a ideal subthreshold swing of 60[mV/dec]. Excellent characteristics of Al/Si was demonstrated higher on/off current ratios of ${\sim}10^7$ than others. In addition, extensive photoresponse analysis has been performed using halogen and deuterium light sources(200<$\lambda$<2000nm).

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.42-47
• /
• 2014

This paper investigates an adaptive approximation design problem for the tracking control of output-constrained non-affine pure-feedback systems. To satisfy the desired performance without constraint violation, we employ a barrier Lyapunov function which grows to infinity whenever its argument approaches some limits. The main difficulty in dealing with pure-feedback systems considering output constraints is that the system has a non-affine appearance of the constrained variable to be used as a virtual control. To overcome this difficulty, the implicit function theorem and mean value theorem are exploited to assert the existence of the desired virtual and actual controls. The function approximation technique based on adaptive neural networks is used to estimate the desired control inputs. It is shown that all signals in the closed-loop system are uniformly ultimately bounded.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.1 s.14
• /
• pp.21-25
• /
• 2006

To improve the performance of organic thin film transistor, we investigated the properties of gate insulator's surface according to the leakage current by I-V measurement. The surface was treated by the dilute n-octadecyltrichlorosilane solution. The alkyl group of n-octadecyltrichlorosilane induced the electron tunneling and the electron tunneling current caused the breakdown at high electric field, consequently shifting the breakdown voltage. The 0.5% sample with an electron-rich group was found to have a large leakage current and a low barrier height because of the effect of an energy barrier lowered by, thermionic current, which is called the Schottky contact. The surface properties of the insulator were analyzed by I-V measurement using the effect of Poole-Frankel emission.

• Proceedings of the Korean Reliability Society Conference
• /
• 2002.06a
• /
• pp.211-216
• /
• 2002

실제적인 문제에서 신뢰성 기반 최적 설계(RBDO)를 구현하기 위해서는 유한요소 모델을 해석하기 위한 상용 프로그램과 설계한 것에 대한 신뢰성을 산정할 수 있는 프로그램을 통합하고 최적화 알고리듬을 적용하여야 최적화를 수행하여야만 한다. 또한 최적화 과정에서 최적상태에서 제약조건이 비활성 영역에서 놓이게 되는 것을 방지하기 위해서 제약조건 최적화 문제를 비제약 조건 최적화 문제로 바꾸어 주는 장애 함수를 사용하여 최적화를 수행하였다. 그리고 이 방법론을 기존의 신뢰성기반 최적화 방법론, 즉 신뢰도지수 접근방법과 목표성능치 접근방법과의 비교를 하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.150-154
• /
• 2001

도로 및 철도에서 발생하는 소음을 저감시키기 위해 설치되는 방음벽은 흡음률, 투과손실 등과 같은 음향성능 외에도 태풍과 같은 강풍에 견딜 수 잇는 구조성능이 확보되어야 한다. 따라서, 본 논문에서는 지역별 특성 및 풍속을 고려한 풍압을 산정하는 방법을 소개하고, 풍압에 의한 방음판의 구조해석을 수행하였다. 또한, EN 1794-1의 규정에서 정하는 시험방법에 따른 방음판의 하중변형량 시험을 통하여 방음판의 구조성능을 평가하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.143-146
• /
• 2004

This study is aimed to numerically evaluate a sound absorption performance of periodically folded barriers. Based on the formulation for sound absorption of a locally reacting surface in a periodic arrangement, variations of the sound absorption with parameters such as the folded width and depth are investigated. In comparison with the sound absorption of a conventional barrier with a flat surface, it is found that the periodically folded barriers can achieve a higher sound absorption especially in the low frequency range.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1778-1783
• /
• 2000

When visual intrusion is an important factor, it is desirable to find alternative methods of improving the insertion loss of a noise barrier without increasing the height. Therefore, the primary object of the work attenuates the noise due to transport vehicle by small interference device installed at noise barrier edge. In this paper the performance of noise barriers with attached interference device, in terms of shape, absorptive material and split panel, are examined using the boundary element approach. Also, the scale models are moanted in an anechoic chamber and the frequency of the sound sources are appropriately scaled to simulate full scale site conditions. Lastly, experimental measurements of the designs are executed for a range of frequencies and receiver positions, and are compared with the results of numerical modeling.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.67-70
• /
• 2002

Remediation of groundwater contaminated with chlorinated organics, nitro aromatics, and heavy metals using zero valent iron (ZVI) filings has paid considerable attention in recent years. When the contaminants of high concentration leaked abundantly in subsurface environment, permeable reactive barrier technology using iron filing is taken a long time for the remediation of contaminated groundwater, The problem of contaminant shock is able to be solved using surfactant (hexadecyltrimethylammonium, HDTMA) modified bentonite (SMB) as immobilizing material. Therefore, the purpose of this research was to develop the combined remediation technology using conventional permeable reactive and immobilizing barrier for the enhanced decontamination of chlorinated compounds. Four column experiments were conducted to assess the performance of the mixed reactive materials with Ottawa sand, iron filing, and HDTMA-bentonite for trichloroethylene (TCE) removal under controlled groundwater flow conditions. TCE reduction rates with sand/iron filing/HDTMA-bentonite were highest among four column due to dechlorination of TCE by iron filing and sorption of TCE by SMB.