• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.702-706
• /
• 1996

Husked barley contained 17.2% dietary fiber and naked barley contained 14.9% dietary fiber. The barley was ground in a Udy cyclotec mill having a 0.5 mm screen and sieved with a 400-mesh screen (38 m openings). Coarse material of naked barley retained by the screen, with a weight yield of 54.1%, contained 7.0% soluble dietary fiber, 13.9% insoluble dietary filer and 20.9% total dietray fiber. As the naked barley flour level increased in bread baking, the water absorption, mixing time, and loaf weight increased, but the loaf volume decreased. Barley flour was added to wheat flour at a replacement level of 10% without a large adverse effect on bread quality, and the dietary fiber content of bread was increased from 3.0% to 5.0%. The soluble dietary fiber content was not changed, but the insoluble dietary fiber content was increased during the baking process.

• Korean Journal of Food Science and Technology
• /
• v.18 no.3
• /
• pp.197-203
• /
• 1986

An enzymatic flour milling process for barley into three major fractions (barley flour, bran-crease-germ and water solubles) was studied. Carbohydrate and protein of barley endosperm could be efficiently solubilized by the digestion process of partially pearled barley with enzymes. Bran, crease and germ were removed from hydrolyzate by filtering through 30-40mesh sieves. And then filtered product was separated into fractions by sedimentation or centrifugation. The most effective digestion of the barley was obtained by the enzyme with higher activities of glucanase and protease under such conditions as barley-water ratio, 1:1.5(W/V) and temperature at $45^{\circ}C$. Total flour yield recovered was approximately 73-76% of the barley, and the portions recovered as bran-crease-germ and water solubles were about 3.6 and 15.8%, respectively.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1078-1083
• /
• 1996

During the pearling process of hull-less barley, protein, lipid, ash and insoluble dietary fiber (IDF) contents decreased, while soluble dietary fiber (SDF) and ${\beta}-glucan$ contents slightly increased. Depending on milling methods and types of grinding mills used, there were differences in particle size distribution of barley flour. Flour particle size was smaller in the following order of Fitz mill, Ball mill, Pin mill, Cyclotec sample mill and Jet mill. Color (brightness) was closely related to the particle size of barley flour. Damaged starch (%) in pearled barley flour was the highest in Jet mill among different mills. Flours prepared with Cyclone mill and Pin mill had a reasonable amount of damaged starch. Flour produced by Fitz mill showed the lowest amount of damaged starch. Scanning electron microscopy (SEM) of the flour samples demonstrated different sizes and shapes of particles consisting of starch granules and cell wall materials. Damaged starch tended to increase water absorption index (WAI), water solubility index (WSI), and water retention capacity (WRC). Pasting viscosity determined by amylograph was relatively high in Pin-milled and Cyclone-milled flours. Viscosity was the lowest in coarsely ground flour by Fits mill.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.99-107
• /
• 1984

Naked barley flour(Baekdong cultivar) was examined with respect to its pasting properties by means of Brabender amylograph after adding barley lipids, fatty acids, vegetable oils and emulsifiers at 1% level. Amylogram of barley flour showed a similar gelatinization temperature but higher paste viscosities at all reference points as compared with wheat flour. Barley flour showed lower amylograph curves by defatting with n-hexane, namely reductions in initial gelatinization point, maximum viscosity and setback value. But re-addition of n-hexane extract to the defatted flour essentially reproduced the curve obtained in the undefatted flour. Addition of polar and nonpolar lipids exhibited different effects on the pasting properties of barley flour. Polar lipids generally increased maximum viscosity a little while non-polar lipids increased the maximum viscosity substantially. Addition of increasing amounts of nonpolar lipids was found to progressively increase the maximum viscosity. Addition of fatty acids increaed th maximum viscosity and delayed the peak time. The maximum viscosity of defatted barley flour impregnated with unsaturated fatty acids was higher than that of defatted barley flour impregnated with saturated fatty acids Increasing amounts of linoleic acid were fount to progressively increase the maximum viscosity and to delay the peak time of defatted barley flour. Addition of six vegetable oils lowered the gelatinization temperature and rasied the maximum viscosity and temperature at maximum viscosity. Addition of increasing amount of peanut oil was found to decrease the maximum viscosity. The effect of emulsifiers was greater in undefatted flour than in defatted flour. The maximum viscosity of defatted flour was slightly affected by Methocel 50, Methocel 1500 and Emulthin, and substantially increased by Methocel 4000, sodium polyacrylate and calcium stearyl lactylate.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.6-15
• /
• 1973

In an attempt to develop composite flours based on raw materials available in Korea, six domestic resources were investigated with respect to their physical and chemical properties, nutritive value and economy. The results are summarized as follows: 1) Flours from naked barley, sweet potato, potato, corn, defatted rice bran and defatted soybean were compared in respect of their proximate composition, thiamine content and protein score. 2) In color comparison, naked barley and defatted soy flours were comparable to wheat flour whereas corn and sweet potato flours were a little inferior. In raising power, naked barley and defatted soy flours were similar to wheat flour and others were inferior. 3) In maximum viscosity of flours by amylograph, naked barley, corn and potato flours were higher than wheat flour and others were lower. In viscosity in cooling, corn flour was similar to wheat flour and naked barley and potato flours were lower. Addition of $10{\sim}20%$ defatted soy flour into other flours generally caused the lowering of viscosity. Addition of emulsifiers such as glyceryl monostearate, calcium stearyl lactylate, Methocel and Emulthin into the flours manifested different effects on the amylogram. 4) In nutritional test by rat, diets consisting of naked barley, sweet potato, potato or corn flours, each containing defatted soy flour (at 10% level with exception of 20% for sweet potato flour) and naked barley flour fortified with lysine were similar to wheat flour in digestibility, but were superior in NPU and biological value. 5) In price estimation, sweet potato and corn flours were competitive with wheat flour, but naked barley flour was a little expensive. On the other hand, barley and sweet potato are promising in terms of domestic production.

• Korean journal of food and cookery science
• /
• v.23 no.5
• /
• pp.720-730
• /
• 2007

This study was investigated (replaced) the sensory and physicochemical properties of Jeungpyun substituted with 30% or 60% of brown rice and barley flours, respectively. The quality changes of the functional Jeougpyun during the storage periods were analyzed by a texturometer. We found that batter pH was decreased as fermentation progressed, but showed a higher pH resulted after steaming. The brown rice replaced Jeungpyun had higher specific gravity and lower viscosity; however, the barley-replaced Jeungpyun had lower specific gravity and higher viscosity compared to those of the control(0% replace with brown rice or barley flour). The barley-replaced samples showed significantly larger volume indexes than that of the control. The L-value of the for lightness decreased significantly within the replaced samples(p<0.001). All samples had negative a-values, with slight peen colors rather than red. The barley-replaced samples were darker than those of the brown rice sample groups, with less green and yellow color. The brown rice-replaced samples had larger values for adhesiveness, overall, and moistness, and the barley-replaced samples showed intensities greater in cell size, springiness, hardness, and flavor by sensory evaluation. The 30% flour-replaced samples of the comparisons had higher values for overall desirability(p<0.001). The replaced samples showed slow increases in hardness when measured by a texturometer, indicating that, the retrogradation rates decreased as the storage periods increased. The control stored for 72 hr had a hardness value that was 8.0 times harder than that of the control stored for one hour. The 30 and 60% brown rice-replaced samples stored for 72 hr were 5.8 times and 4.7 times harder of their replacement level, respectively, and the 30 and 60% barley-replaced samples stored for 72 hr were 5.7 times and 4.2 times harder of their replacement level, respectively. The adhesiveness and cohesiveness of all samples tended to decrease as the storage period increased. The barley-replaced samples showed significantly the lower adhesiveness and cohesiveness during the storage periods. The springiness of all samples decreased slowly during the storage periods. In conclusion, Jeungpyun that was substituted with brown rice and barley flours demonstrated improved functionality and higher dietary fiber replaced effect. Furthermore, the storage period of was extended as the retrogradation rate was delayed as a result of the dietary fibers.

• Korean Journal of Food Science and Technology
• /
• v.6 no.2
• /
• pp.65-69
• /
• 1974

Noodles were made from composite flours based on barley or sweet potato/wheat flour and their quality was assessed to obtain the following results. 1) In noodle sheet and dried noodle formation, barley flour could substitute 100% and sweet potato flour, 70% of wheat flour and their textural characteristics were improved by addition of glyceryl monostearate and sodium polycrylate. 2) Textural parameters such as hardness, cohesiveness and gumminess of noodle sheet and dried noodle were decreased by admixture of barley of sweet potato flour whereas they were increased by use of the additives. Noodle sheet required hardness over 6.2 and gumminess over 430 while dried noodle needed hardness over 6.8. 3) In cooked noodle, replacement of wheat flour and use of additives tended to lower the textural parameters. With respect to the cooking quality, barley flour could substitute 60% and sweet potato flour, 40% of wheat flour. 4) In organoleptic evaluation of cooked noodle with respect to its color, taste and texture, 20% replaced composite flour was not different significantly at 5% level from wheat flour and the quality defect was mainly due to discoloration of the product.

• Korean Journal of Food Science and Technology
• /
• v.7 no.4
• /
• pp.187-193
• /
• 1975

A supplemental effect of Undaria Pinnatifida extract on the composite flour prepared from a blend of wheat, barley, sweet potato, potato, and defatted soybean flours was studied in terms of binding properties, cooking test, and sensory analysis. Dry noodle of the composite flour was made by the conventional method and air dried. Instant noodle was prepared in a hot vegetable oil bath after the noodle was made. The standard was made of wheat flour only. 1. The noodle prepared with composite flour (wheat flour : barley flour, 5 : 5) and Undaria Pinnatifida extract (1 or 2%) showed same results of cooking and sensory tests as well as properties of texture as the standard. 2. The mixture of wheat, barley and defatted soybean flour (10%) had a less efficient binding capacity with Undaria Pinnatifida extract. The binding effect was, however, significantly improved with the wheat and barley flour mixture with either sweet potato or potato flour. 3. The instant noodle prepared with the composite flour (either barley, or sweet potato, or potato was mixed with wheat flour up to 70% separately) and hydroxypropyl methyl cellulose (1% as final) showed the higher oil absorption and the sensory results were the same as the standard. Nevertheless, the binding properties and cooking quality were less efficient.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.260-266
• /
• 2013

The study was carried out to determine the gel pasting properties of barley (Hordeum vulgare L. cv. Geoncheonheugbori) as affected by different proton beam irradiation. The ${\lambda}max$, blue value, and amylose content were significantly associated with increasing proton beam irradiation. The pasting time in barley flour irradiated with proton beam ranged 0.09 to 0.16 min shorter than nonirradiated barley flour. Gel pasting temperature ranged 57.4 to $60.5^{\circ}C$. Gel pasting temperature in barley flour decreased with increasing proton beam irradiation. Proton beam irradiation caused a significant decrease in the onset temperature (To), peak temperature (Tp), conclusion temperature (Tc) and enthalpy change (${\Delta}H$). Gelatinization range (R) in barley starch was more broaden than that of non-irradiated barley starch. Barley starches gave the strong diffraction peak at around $2{\Theta}$ values$15^{\circ}$, $18^{\circ}$, $20^{\circ}$, and $23^{\circ}$ $2{\Theta}$. Peak intensity tended to increase with increased proton beam irradiation. The granule crystallinity is closely associated with decreased amylose and increased amylopectin component. The crystallinity degree of barley starch irradiated with proton beam was significantly increased and it ranged from 24.9 to 32.9% compared to the non-irradiated barley starches. It might be deduced that proton beam irradiation causes significant changes of properties of starch viscosity in rice, especially at high irradiation of proton beam.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.890-896
• /
• 1998

In order to increase the use of waxy barley, cakes were made and the textural and sensory properties were investigated. The moisture content of cakes made out of waxy barley grain and flour were 51.0 and 52.1%, respectively. L values in color of the waxy barley cakes tended to decrease during 3 day storage at 15$^{\circ}C$. Textural analysis showed that there were no differences among two waxy barley and waxy rice cakes in hardness at fresh state. But after 3 day storage at 15$^{\circ}C$, the hardness of the waxy barley cake was lower than that of waxy rice cake. These results implied that the degree of retrogradation of waxy barley cake might be low due to its high dietary fiber content. The hardness and adhesiveness of the waxy barley cake thawed after 15 day freezing were not significantly different from those of the fresh cake. In sensory evaluation, the overall preference of waxy barley cake was lower than that of waxy rice, but the sensory score of the cake made of waxy baley flour was above 4 point in the 5 point scale, showing a patency of waxy barley for the cakes.