• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.755-760
• /
• 2016

In general, the storage life of hardy kiwifruit (Actinidia arguta) is approximately one month, even in cold storage, which is a limiting factor for its commercialization due to the short marketing period. This short shelf life is in contrast to those of green kiwifruit (A. deliciosa, 6 to 8 months) and gold kiwifruit (A. chinensis, 4 to 6 months). To increase the storage life of hardy kiwifruit, we performed a cross between A. arguta (a local collection, 'Hy2-1', female) and A. deliciosa ('Matua', male) at Wando station at the Fruit Research Institute of JARES, Korea in 1999. After the first selection in 2006, we clonally propagated the hybrid plants by grafting them onto A. arguta seedlings in Gwangyang and Haenam province, Korea. We performed the final selection of this cultivar in 2012 and applied for plant protection rights from the Korea Forest Research Institute in 2013. Several experimental orchards have been established for commercial production. 'Mansu' begins to flower on May 20 in Gwangyang. The horticultural maturity date in 'Mansu', when the soluble solid content reaches $7^{\circ}Bx$, is October 15, whereas that of the control variety ('Chiak') is October 5. The average fruit size of 'Mansu' is approximately 15 g. The soluble solid content of 'Mansu' is approximately 16 to $17^{\circ}Bx$ after ripening. The total yield of mature 'Mansu' vines is estimated to be 2.2 to 2.5 tons per 10a. The fruit firmness of 'Mansu' exceeded 1.5 kg/5 mmØ until 70 days after storage (at 0 and $1^{\circ}C$). Therefore, 'Mansu' fruits have much longer storability than the control. The cultivation and production of 'Mansu' may extend the marketing period for hardy kiwifruit.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.1
• /
• pp.45-52
• /
• 2003

A number of stress corrosion cracks in turbine rotor disk keyway in power plants have been found and the necessity has been raised to detect and evaluate the cracks prior to the catastrophic failure of turbine disk. By ultrasonic RF signal analysis and using a neural network based on bark-propagation algorithm, we tried to evaluate the location, size and orientation of cracks around keyway. Because RF signals received from each reflector have a number of peaks, they were processed to have a single peak for each reflector. Using the processed RF signals, scan data that contain the information on the position of transducer and the arrival time of reflected waves from each reflector were obtained. The time difference between each reflector and the position of transducer extracted from the scan data were then applied to the back-propagation neural network. As a result, the neural network was found useful to evaluate the location, size and orientation of cracks initiated from keyway.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.31-63
• /
• 1991

It was proved that in conventional kiln drying of disks piling position in the kiln exerted a great influence on drying rates, and the larger the variation of disk diameter, the more undulating drying rates of disks. While in vacuum drying disks there was no influence on drying rates. By the end-wrapping treatments and the radial direction of disks tangential surface stresses in the core of disks were slightly compressive in three species. In control disks the drying stresses distributed into one step-style that compressive stresses in the pith side of 6cm from pith were larger than those in the bark side, while in the disks end-wrapped with Korean paper the drying stresses distributed uniformly, because flow rates of free water in disks had no difference between heart-and sap-wood by obstruction of evaporating water from surface of disks by end-wrapping with Korean paper. And end-wrapping with Korean paper considerably restrained those. Tangential differential shrinkage stresses developed the maximum tensile stress near the bark and with approaching the pith the stresses gradually reduced and changed into compressive stresses in near the pith. At the end of vacuum drying the maximum tangential tensile stresses of disks end-wrapped with Korean paper were smaller than those of control disks, and critical moisture contents causing the V-shaped crack of disks end-wrapped with Korean paper were lower than those of control disks because of the set by obstruction of evaporating water of end-wrapping with Korean paper. In the experiment of vacuum drying stress distribution the disks end-wrapped with Korean paper or aluminum foil in three species were free from V-shaped cracks and control disks were defected very slightly by V-shaped cracks. And also disks end-wrapped with Korean paper were free from heart checks in Alnus japonica and Juglans sinensis, and heart checks were occurred very slightly in others. Especially, not to speak of disks end-wrapped with Korean paper, vacuum drying of disks end-wrapped with aluminum foil prevented effectively drying defects, moreover drying times could be shortened, that is. Ginkgo biloba, Alnus japonica, and Juglans sinensis disks could be dried from green to in-use moisture content in 110 hours, 272 hours, and 407 hours, respectively.

• Korean journal of applied entomology
• /
• v.46 no.1 s.145
• /
• pp.19-25
• /
• 2007

A survey to investigate the inhabitation of Callipogon relictus Semenov and evaluate the population of the species in the Gwangneung Forest was conducted during last seven years. During the study, a female was observed in the forest in 2006 which confirmed a possibility of the inhabitation with a small population. Fortunately, a ovipositing female was observed in the forest during this study period in 2006. The female laid more than 20 eggs singly in the crack of bark of the Carpinus laxiflora Blume. We collated the all available data for the species with the present study including the previous reports to provide the information far the conservation plan. It will be needed the long term monitoring and various efforts for the conservation of the species will be need hereafter.