• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.107-113
• /
• 2004

The advent of Radio Frequency Identification (RFID) technology has created new opportunities for improving the material management function in the construction industry and is starting to provide major improvements in the efficiency of the material management process. The objective of the research reported herein was to introduce the benefits of RFID technology on material management in the construction industry. RFID technology is discussed and various aspects of this technology are investigated. Potential RFID applications on material management proposed by Construction Industry Institute (CII) Breakthrough Strategy Committee (BTSC) and Fully Integrated and Automated Technology (FIATECH) are spelled out Finally, business analysis of RFID to estimate its impact is provided. It is concluded that there is a significant potential for improvement of material management function in the construction industry through the use of RFID.

• Annual Conference of KIPS
• /
• 2001.10b
• /
• pp.1217-1220
• /
• 2001

우편물의 자동구분은 우편물을 OVIS(OCR-Video coding Integrated System)에 자동으로 공급하고 우편물의 수취인 주소영역을 카메라를 이용하여 획득한 다음 우편번호를 인식하여 바코드로 변환하여 인쇄하게 되고, 이 우편물은 LSM(Letter Sorting Machine)으로 보내져 BCR(Bar Code Reader)에 의해 인쇄된 바코드를 판독하여 행선지별로 구분하는 과정을 거친다. 주소의 번지 이하 부분은 배달원의 수작업에 의해 최종 배달지점 순서대로 정렬한 다음 배달하게 된다. 이 부분의 작업에 소요되는 시간은 배달원 일일 평균 4 시간에 달하며 원가절감 대상으로 지적되고 있다. 이 부분을 자동화하여 우편물 처리시간을 단축하고 생산성을 향상하는 방안이 대두되고 있으며, 이를 해결하기 위해 번지 부분까지 OCR을 이용, 인식하여 우편번호 및 순로 데이터 베이스에서 인식결과에 해당하는 코드를 추출하여 해당 구분 칸으로 우편물을 분류하는 방식을 택하면 집배원이 우편물을 배달하는 순로까지 자동으로 정렬할 수 있게 된다. 본 논문은 수취인 주소영역의 주소부분을 자동판독하기 위한 시스템을 개발한 내용을 다루고자 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.114-122
• /
• 2013

This study introduces an optimization methodology for the determination of gate location that ensures the melt flow balance within a part cavity of injection mold. A new sequential direct-search scheme based on the recursive reduction of the designer-specified gate design area is developed, and it is integrated with a commercial flow simulation tool for optimization. To quantify the level of melt flow balance, we employ the maximum difference among the fill times for the melt fronts to reach the boundary elements of part cavity as objective function. The proposed methodology is successfully applied in the case study of melt flow balancing in molding of a bar code scanner model. The result shows that the melt flow balance at the optimized gate positions is significantly improved from that for the initial gate position.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.116-121
• /
• 2011

Performance of Secondary Injection Thrust Vector Control system is investigated under various secondary injection operating conditions. 3-dimensional converging-diverging nozzle having 8 secondary injection nozzles is used in this numerical study. Total pressure of flow inside the nozzle is about 70bars, and total temperature set to 300K for cold flow simulation. Effect of secondary injection flow rate and injection nozzle configuration is considered in this research. Simulation is conducted with commercial CFD code Ansys Fluent v13. Spalart-Allmaras(1-equation)model is used for turbulence modeling with AUSM+ scheme. Various performance factors as Axial thrust, side force, system specific impulse ratio are considered and explained for system performance evaluation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.1
• /
• pp.93-98
• /
• 2016

A large number of victims or witnesses to incidents and accidents should visit a police station and fill the decree stated. Stated decree workaround discomfort and hygienic problems in unnecessary step process using the fingerprint after you modify the modified portion when due modify the request as of the import or typos recognized that modifications and police in the. Stated decree in the investigation phase when creating KICS and electronic Resources investigation into the identity of the one-touch fingerprint reader linked with the introduction table system and thinning, which can simplify the day of the procedure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.115-120
• /
• 2010

Products companies, which manufactures finished goods with modular parts, will expect that the proper parts should be delivered to assembly line not only just in time (JIT) but also just in sequence (JIS) and also expect that faulty goods will not be produced due to the delivery of wrong parts. In order to satisfy the above requirements, recently Smart Pallet based Parts Delivery system (SPPD) was proposed. SPPD system can overcome the drawback of bar code based part delivery system in which much time for checking proper and in sequence parts is wasted due to labors' working in hand as well as the drawback of RFID based part delivery system in which recognition distance of RFID is very limited. In the paper, a PDA system is proposed and further implemented to maximize the efficiency of SPPD's operation as well as to manage the limited power of smart pallets efficiently.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.3
• /
• pp.389-400
• /
• 1997

A thermodynamic cycle analysis is performed for refrigerator-precooled Linde-Hampson hydrogen liquefiers, including catalysts for the ortho-to-para(o-p) conversion. three different configurations of the liquefying system, depending upon the method of the o-p conversion, are selected for the analysis. After some simple and justifiable models are introduced, a general analysis program to predict the liquid yield and the figure of merit(FOM) is developed with incorporating the commercial computer code for the hydrogen properties. The discussion is focused on the effect of the two primary design parameters-the precooling temperature and the high pressrure of hydrogen. When the precooling temperature is in the range between 45 and 60 K, the optimal high pressure for the maximal liquid yield is found to be in the range between 100 to 140 bar, regardless of the o-p conversion. However, the FOM can be maximized at slightly smaller values of high pressures. It is remarkable to observe that the lower precooling temperatures are favorable since both the liquid yield and the FOM can be obtained without compressing hygrogen to extremely high pressures.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.155-159
• /
• 2016

In this work, we have developed a test system to examine whether the charge indicator of the plug-in hybrid electric vehicle (PHEV) works properly or not. In PHEV, the driver should charge the necessary electricity by plugging in manually and be able to know the charging status through the charge indicator conveniently located for the charging individual. Our system used the CAN bus to transmit the same commands from ECU to the indicator to test the proper operation of the indicator lights. It measured the electric current values during operation and analyzed to determine the quality of the indicators. The inspection items included the proper packaging, the electrical shorts, the LED lighting during charging, the LED lighting for charging failure, and the LED lighting when errors occur. We developed the system for the operators in the factory allowing them to approve the test results at the site. We developed the hardware, the control software, and the software to store the test results and the history of the products in the database. Serial numbers were given to the good quality products and the bar code labels were printed to trace the products afterwards. Through this work, we developed a system to inspect the electric parts in real time upon fabrication. We are planning to further improve our system to inspect the brightness of the indicator by adding the vision inspection in future.

• Korean journal of food and cookery science
• /
• v.29 no.6
• /
• pp.795-803
• /
• 2013

This study examined the usage, perception and willingness to use beef traceability. The data were collected from 255 housewives in Busan and Gyeongnam region through a self-administered questionnaire. Frequency, Cronbach's ${\alpha}$, t test, one-way ANOVA, Duncan's multiple range test, Pearson's correlation analysis, and multiple regression analysis were conducted by SPSS Windows V.20.0. Only twelve percent of the respondents experienced to use beef traceability. Most respondents checked it by kiosk or bar code reader in a store. On the other hand, eighty-eight percent did not use beef traceability. The reasons for not usage of it were "Do not know beef traceability very well", "Do not know how to use beef traceability", and "Information from packing or counters is reliable" in order. In the level of perception of beef traceability, safety assurance was highest, followed by information quality, usefulness, and information accessibility. The percentage of correct answers of knowledge about beef traceability was not high. The multiple regression analysis showed that employment status, knowledge about beef traceability, information quality, information accessibility, and usefulness were significant factors to affect the willingness using beef traceability.

• Computers and Concrete
• /
• v.20 no.1
• /
• pp.39-47
• /
• 2017

In this paper, mode I fracture toughness of rock was determined by direct and indirect methods using Particle Flow Code simulation. Direct methods are compaction tension (CT) test and hollow centre cracked quadratic sample (HCCQS). Indirect methods are notched Brazilian disk (NBD) specimen, the semi-circular bend (SCB) specimen, hollow centre cracked disc (HCCD), the single edge-notched round bar in bending (SENRBB) specimen and edge notched disk (END). It was determined that which one of indirect fracture toughness values is close to direct one. For this purpose, initially calibration of PFC was undertaken with respect to data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, the simulated models in five introduced indirect tests were cross checked with the results from direct tests. By using numerical testing, the failure process was visually observed. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Mode I fracture toughness of rock in direct test was less than other tests results. Fracture toughness resulted from semi-circular bend specimen test was close to direct test results. Therefore semi-circular bend specimen can be a proper test for determination of Mode I fracture toughness of rock in absence of direct test.