• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.329-333
• /
• 2005

This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we propose the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The current resolution of the vibration measurement is limited to sub centimeter scale. However, the frequency bandwidth and resolution can be enhanced by a high-speed and high-resolution image processing system.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.10
• /
• pp.975-979
• /
• 2010

Existing quality adaptation schemes are useful for improving network stability in a congested network, but these schemes do not guarantee the quality of experience on video streaming due to the frequent variations in playback quality for a streaming service. In this paper, we propose a network-adaptive quality adaptation scheme to guarantee the quality of experience on SVC(Scalable Video Coding) video streaming. The proposed scheme estimates the available bandwidth by bandwidth measurement scheme using media characteristic, and then smoothly adjusts the quality level of SVC video stream according to the estimated bandwidth. Through the simulation, we prove that our scheme guarantees the quality of experience for video streaming by minimizing quality variation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.167-172
• /
• 2012

This paper aims on comparative analysis of measuring efficiency of occupied bandwidth between MRTG average traffic and internet real-time traffic by measuring the type of internet application service. Through this analysis, the user can measure their internet line and occupy a certain amount of bandwidth and will have to invest on how much is compared to MRTG maximum traffic graph. The result of measurement proved 1.4 times to 20 times occupied bandwidth error rate between real-time and average traffic by the type of internet services.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1287-1292
• /
• 2012

In this paper, a dual polarization patch antenna operates at the wide bandwidth of 1.525GHz~1.665GHz was designed and fabricated. To obtain the wide bandwidth and high gain, increased height of air floor from GND was applied, and to get wide band axial ratio and high gain, parasitic patch was applied. The simulation and measurement showed good agreements, the VSWR was less than 1.9 at the frequency bandwidth, the return loss was less than -10dB, and the LHCP(Left Hand Circular Polarization) and RHCP(Right Hand Circular Polarization) isolation was less than -13dB at the frequency bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.285-297
• /
• 2015

In this paper, Ulta-WideBand (UWB) channel measurement and modeling based on compressive sampling (CS) are proposed. The sparsity of the channel impulse response (CIR) of the UWB signal in frequency domain enables the proposed channel measurement to have a low-complexity and to provide a comparable performance compared with the existing approaches especially used for the indoor geo-localization purpose. Furthermore, to improve the performance under noisy situation, the soft thresholding method is also investigated in solving the optimization problem for signal recovery of CS. Via numerical results, the proposed channel measurement and modeling are evaluated with the real measured data in terms of location estimation error, bandwidth, and compression ratio for indoor geo-localization using UWB system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.359-365
• /
• 2018

Herein, electromagnetic shielding structures to reduce the external noise coupling to printed spiral coils (PSCs) and a design method for improving the bandwidth of shielded PSCs have been proposed. It has been demonstrated that the bandwidth of shielded PSCs is limited due to the parasitic capacitance between the coils and the shielding structures and is confirmed by the transfer function simulation of the shielded PSCs with a transmission line as the radio-frequency interference noise source. A design method for the bandwidth improvement of the shielded PSCs has been proposed based on the equivalent circuit model analysis and the case studies depending on PSC designs with a three-dimensional field simulation. With the design method, an optimized shielded PSC design has been presented and successfully confirmed by experimental verification in that the optimized design results in a significant bandwidth improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.30-37
• /
• 2006

In this paper, we propose a QoS-aware efficient bandwidth re-provisioning scheme in a next generation wireless packet transport network. At the transport network layer, it classifies the traffic of the radio network layer into a real time class and a non-real time class. Using an auto-regressive time-series model and a given packet loss probability, our scheme predicts the needed bandwidth of the non-real time class at every re-provisioning interval. Our scheme increases the system capacity by releasing the unutilized bandwidth of the non-real time traffic class for the real-time traffic class while insuring a controllable upper bound on the packet loss probability of a non-real time traffic class. Through empirical evaluations using the real Internet traffic traces, our scheme is validated that it can increase the bandwidth efficiency while guaranteeing the quality of service requirements of the non-real time traffic class.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.52-66
• /
• 2010

Since large objects consume substantial resources, web proxy caching incurs a fundamental trade-off between performance (i.e., hit-ratio and latency) and overhead (i.e., resource usage), in terms of caching and relaying large objects to users. This paper investigates how and to what extent the current dedicated-server based web proxy caching scheme is affected by large file transfers in a high bandwidth campus network environment. We use a series of trace-based performance analyses and profiling of various resource components in our experimental squid proxy cache server. Large file transfers often overwhelm our cache server. This causes a bottleneck in a web network, by saturating the network bandwidth of the cache server. Due to the requests for large objects, response times required for delivery of concurrently requested small objects increase, by a factor as high as a few million, in the worst cases. We argue that this cache bandwidth bottleneck problem is due to the fundamental limitations of the current centralized web proxy caching model that scales poorly when there are a limited amount of dedicated resources. This is a serious threat to the viability of the current web proxy caching model, particularly in a high bandwidth access network, since it leads to sporadic disconnections of the downstream access network from the global web network. We propose a peer-to-peer cooperative web caching scheme to address the cache bandwidth bottleneck problem. We show that it performs the task of caching and delivery of large objects in an efficient and cost-effective manner, without generating significant overheads for participating peers.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.173-174
• /
• 2006

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.3
• /
• pp.277-283
• /
• 2016

A high-precision force-feedback 3-axes accelerometer developed in Korea has been investigated and studied for the verification of feasibility in the computational analysis and health monitoring of civil infrastructures. Through a series of experiment, the nonlinearity, bandwidth, low-frequency signal measurement accuracy and bias characteristics of the accelerometer has been thoroughly compared to those of two accelerometers produced by two market leaders in domestic and global accelerometer market. The experiment results shows that the overall measurement performance of the accelerometer has superiority over the performance of the two accelerometers from global market leader companies. Especially, the accelerometer shows a better low-frequency signal measurement accuracy and constant bias characteristic, which are mostly required in the computational analysis and the long-term health monitoring of large-scale civil infrastructures.