• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.255-258
• /
• 2005

In this paper, we verify that the bandwidth of the optimized disk-loaded monopole antenna with electromagnetically coupled feed obtained using a genetic algorithm is broader than the theoretical bandwidth limit of 2/Q by simulation as well as by measurement. The measured bandwidth of the optimized antenna (kr : 0.599) is about 42% from 380 MHz to 580 MHz (VSWR<5.8). The efficiency measurement of the antenna is over 90% for the frequency band of operation.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.27-37
• /
• 2004

The architecture in a differentiated services (DiffServ) network is based on a simple model that applies a per-class service in the core node of the network. However, because the network behavior is simple, the network structure and provisioning is complicated. If a service provider wants dynamic provisioning or a better bandwidth guarantee, the differentiated services network must use a signaling protocol with QoS parameters or an admission control method. Unfortunately, these methods increase the complexity. To overcome the problems with complexity, we investigated scalable dynamic provisioning for admission control in DiffServ networks. We propose a new scalable $qDPM^2$ mechanism based on a centralized bandwidth broker and distributed measurement-based admission control and movable boundary bandwidth management to support heterogeneous QoS requirements in DiffServ networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.780-788
• /
• 2011

The lack of QoS (Quality of Service) support functionalities in IEEE 802.11 DCF mode makes it difficult to provide real-time multimedia services in WLANs. In this paper, we propose an effective available bandwidth measurement method in IEEE 802.11b DCF environments. The proposed method measures the total channel idle time and the collision probability during each measurement period. Then, the available bandwidth is calculated by considering those measured information and the transmission overheads at MAC and PRY layers. The performances of the proposed method are evaluated using OPNET simulator. The simulation results show that the proposed method provides more exact results than existing comparable schemes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.2
• /
• pp.221-232
• /
• 1999

This study investigates the applicability and design scheme of fieldbus network in the measurement system used for precise and safe construction as well as efficient maintenance of bridges. In order to maximize the function and performance of bridge monitoring system, this study introduces the CAN(Controller Area Network), one of the fieldbus protocols, in the measurement system of bridges. This study presents the implementation method of CAN on the monitoring system of bridge, and also proposes a bandwidth allocation scheme for the design of network. The validity of the proposed CAN design method is verified through a simulation experiment. It is shown that the CAN can be readily applicable to the measurement system of bridges.

• Journal of Drive and Control
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2017

The spool displacement of a directional control valve can be considered as the standard signal for the measurement of its bandwidth frequency. When the spool displacement is not available, the metering-orifice system is suggested in this study as an alternative way to measure the - 3 dB amplitude-ratio bandwidth frequency of the hydraulic directional-control valve. The amplitude ratio of the metering-orifice pressure can be adjusted to equal that of the spool displacement through the controlling of the metering-orifice opening area. A series of experiments were conducted to verify the effectiveness of the metering-orifice system. The metering orifice was confirmed as adequate for the measurement of the - 3 dB amplitude-ratio bandwidth frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1508-1516
• /
• 2017

Multipath TCP (MPTCP) is a transport layer protocol that supports multipath transmission. If a bufferbloat occurs in one of the subflows of MPTCP, HoL blocking occurs at the receiver due to the difference in packet arrival time among paths. In MPTCP, HoL blocking degrades not only the performance of the path where bufferbloat occurs, but also the performance of other paths. In this paper, we propose a bandwidth measurement based scheduler to solve this problem. Bandwidth measurement based scheduler is designed to measure the bandwidth of each subflow and to perform packet scheduling based on it. In order to verify the proposed scheduler, we implemented the proposed scheduler in the Linux kernel and constructed a testbed in which bufferbloat occurs. Experimental results show that the proposed scheduler has better performance than the legacy MPTCP in bufferbloat environment.

• Proceedings of the KSPS conference
• /
• 2006.11a
• /
• pp.131-134
• /
• 2006

Quality of narrowband speech $(0{\sim}4kHz)$ can be enhanced by the bandwidth expansion technique, by which the high- band components are estimated. This paper proposes the bandwidth expansion method using the spline codebook based spectral folding. For the performance evaluation, the PESQ(Perceptual Evaluation of Speech Quality) scores are measured as the objective measurement In addition, the MOS (Mean Opinion Score) and the preference tests are performed as the subjective measurement. The results show our proposed method outperforms the existing spline based one.

• ETRI Journal
• /
• v.40 no.6
• /
• pp.794-801
• /
• 2018

This paper proposes a novel graphene-based optical microelectromechanical systems MEMS accelerometer that is dependent on the intensity modulation and optical properties of graphene. The designed sensing system includes a multilayer graphene finger, a laser diode (LD) light source, a photodiode, and integrated optical waveguides. The proposed accelerometer provides several advantages, such as negligible cross-axis sensitivity, appropriate linearity behavior in the operation range, a relatively broad measurement range, and a significantly wider bandwidth when compared with other important contributions in the literature. Furthermore, the functional characteristics of the proposed device are designed analytically, and are then confirmed using numerical methods. Based on the simulation results, the functional characteristics are as follows: a mechanical sensitivity of 1,019 nm/g, an optical sensitivity of 145.7 %/g, a resonance frequency of 15,553 Hz, a bandwidth of 7 kHz, and a measurement range of ${\pm}10g$. Owing to the obtained functional characteristics, the proposed device is suitable for several applications in which high sensitivity and wide bandwidth are required simultaneously.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.246-247
• /
• 2004

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.89-96
• /
• 2000

ABR service is defined by ATM Forum and ITU for the efficient use of link bandwidth, and 2-pass service policing is proposed for this service. 2-pass service policing is effective by the real-time measurement of the used bandwidth, and this scheme obtains multiplexing gam and control efficiently ABR traffic as dynamically allocating rate by residual bandwidth information. In this study, we propose the real-time bandwidth prediction scheme for ABR traffic control, as using dynamic rate allocation by available bandwidth information. This study can obtain the simple hardware structure by means of as predicting available bandwidth by the total link bandwidth and the sum of transmission rate on the backlogged state connections.