• 정보처리학회논문지C
• /
• 제10C권3호
• /
• pp.305-310
• /
• 2003

ATM 망에서 ABR(Available Bit Rate) 서비스 이상으로 단순한 구현을 통해 대역폭 보장을 만족할 수 있는 다양한 GFR(Guaranteed Frame Rate) 구현의 성능에 대한 연구가 이루어지고 있다. GFR 서비스에 있어서 서비스 품질보장을 만족시키기 위한 중요한 요소 중의 하나는 버퍼관리이다. 즉 ATM 스위치에서 untagged된 셀에 대해 MCR(Minimum Cell Rate)을 보장하기 위해서는 효율적인 버퍼관리가 필요하다. 본 논문에서는 GFR 서비스 보장을 위한 버퍼관리 기법을 제안하고 시뮬레이션을 통해 성능을 평가하였다. 제안된 기법은 각 VC간의 공평성을 보장하기 위해 버퍼에서 셀 폐기를 제어 할 수 있도록 하였으며, 기존의 방식인 Double-EPD(Early Packet Discsrding) 및 DFBA(Differential Fair Buffer Allocation) 기법과 비교하였다. 시뮬레이션 결과 제안된 기법이 기존의 기법에 비해 goodput 및 공평성지표면에서 향상되었음을 확인하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.37-44
• /
• 2020

In this paper, we proposed a compact printed monopole antenna with an inverted L-shaped slot for dual-band operations. Two operating frequency bands are achieved with the use of an inverted L-shaped slot etched on the radiating strip for bandwidth enhancement and a defected ground structure for return loss improvement in the higher frequency band. The measured results showthat the proposed antenna has impedance bandwidths (S₁₁< -10 dB) of 270 MHz (1.81-2.08 GHz) and 340 MHz (2.36-2.70 GHz), covering the required bandwidths for PCS (1850.5-1989.5 MHz), CDMA 2000 (1850-1990 MHz), TD-SCDMA (1880-2025 MHz) and 2.4 GHz WLAN (2400-2484 MHz). The measured return loss of the proposed antenna has a good value of approximately 27.2 dB at 2.4 GHz WLAN. The antenna's peak gains also have a high value of 1.92 dBi at 2 GHz and 2.12 dBi at 2.45 GHz. The proposed antenna shows omnidirectional radiation patterns over the entire frequency range of interest.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권6호
• /
• pp.2730-2747
• /
• 2016

Due to the limitation of the bandwidth resource and capture resolution of depth cameras, low resolution depth maps should be up-sampled to high resolution so that they can correspond to their texture images. In this paper, a novel depth map up-sampling algorithm is proposed by exploiting the fractal internal self-referential feature. Fractal parameters which are extracted from a depth map, describe the internal self-referential feature of the depth map, do not introduce inherent scale and just retain the relational information of the depth map, i.e., fractal transforms provide a resolution-independent description for depth maps and could up-sample depth maps to an arbitrary high resolution. Then, an enhancement method is also proposed to further improve the performance of the up-sampled depth map. The experimental results demonstrate that better quality of synthesized views is achieved both on objective and subjective performance. Most important of all, arbitrary resolution depth maps can be obtained with the aid of the proposed scheme.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권7호
• /
• pp.308-314
• /
• 2005

The 2 GHz film bulk acoustic wave resonator(FBAR), one of the most necessary device of the next generation mobile communication system, consisted of solidly mounted resonator(SMR) structure using Brags reflector, was researched in this paper The FBAR applied SiO$_{2}$ and W had large difference of the acoustic impedance to reflector Al to electrode and ZnO to piezoelectric layer. Specially, the FBAR applied the two-step deposition method to improve the c-axis orientation and increase reproducibility of the fabrication device had good performance. The electrical properties of plasma such as impedance, resistance, reactance, $V_{pp},\;I{pp}$, VSWR and phase difference of voltage and current, was analyzed and measured by RF sensor with the variable experiment process factors such as gas ratio, RF power and base vacuum level about concerning the thickness, c-axis orientation, adhesion and roughness. The FBAR device about the optimum condition resulted reflection loss(S$_{11}$) of -17 dB, resonance frequency of 1.93 GHz, electric-mechanical coefficient(k$_{eff}$) of 2.38 $\%$ and Qualify factor of 580. It was seen better qualify than the common dielectric filter at present and expected on business to the filter device of 2 GHz bandwidth with the MMIC technology.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.595-604
• /
• 2016

Utilizing a standard 130-nm CMOS process, a RF frontend is designed at 24 GHz for automotive collision avoidance radar application. Single IF direct conversion receiver (DCR) architecture is adopted to achieve high integration level and to alleviate the DCR problem. The proposed frontend is composed of a two-stage LNA and downconversion mixers. To save power consumption, and to enhance gain and linearity, stacked NMOS-PMOS $g_m$-boosting technique is employed in the design of LNA as the first stage. The switch transistors in the mixing stage are biased in subthreshold region to achieve low power consumption. The single balanced mixer is designed in PMOS transistors and is also realized based on the well-known folded architecture to increase voltage headroom. This frontend circuit features enhancement in gain, linearity, and power dissipation. The proposed circuit showed a maximum conversion gain of 19.6 dB and noise figure of 3 dB at the operation frequency. It also showed input and output return losses of less than -10 dB within bandwidth. Furthermore, the port-to-port isolation illustrated excellent characteristic between two ports. This frontend showed the third-order input intercept point (IIP3) of 3 dBm for the whole circuit with power dissipation of 6.5 mW from a 1.5 V supply.

• 전자공학회논문지 IE
• /
• 제49권2호
• /
• pp.9-17
• /
• 2012

음성 인식 시스템의 용용에서 실제 문제점의 하나는 음성신호의 왜곡에 의한 인식성능의 저하이다. 음성신호의 왜곡에 가장 중요한 원인은 부가적인 잡음이다. 이 논문은 잡음에 강인한 음성인식을 위하여, 스펙트럼 피크 향상 기법과 효과적인 잡음 차감 기법에 기초한 스펙트럼 보상 방법을 기술한다. 제안한 방법은 음성 스펙트럼의 포먼트 구조를 향상시키고 스펙트럼 기울기를 보상하면서도 광 대역폭 스펙트럼 요소는 그대로 유지한다. 백색 가우스 잡음, 자동차 잡음, 음성 잡음 또는 지하철 잡음에 의해 왜곡된 음성을 이용한 인식실험을 수행한 결과, 새로운 방법은 스펙트럼 보상을 하지 않은 경우에 비해, 높은 SNR(Signal to Noise Ratio) 환경에서는 평균 오인식율을 약간 줄였으며, 낮은 SNR(10 dB) 환경에서는 평균 오인식율을 1/2로 크게 줄였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.322-326
• /
• 2008

In this paper, we have studied the images which have been reconstructed by using combination of images acquired by the variation of operating frequency. When inner images have been reconstructed, they have been superposed by the surface state effect. In this case, the images of the phase object can be enhanced by the contrast of inner images. There is a kind of specimen, one is a reference block having 1/4T, 1/2T, 3/4T side drilled holes as main run piping material of the steam generator in nuclear power plants. It has been shown that the two results of defect shapes have better than before in this processing and phase contrast grow about twice. And we have constructed the acoustic microscope by using a quadrature detector that enables to acquire the amplitude and phase of the reflected signal simultaneously. Further more we have studied the reconstruction method of the amplitude and phase images, the enhancement method of the defect images' contrast.

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1305-1315
• /
• 2000

It is known that a digital image enlargement technique can increase the size of he image but the practical enhancement of resolution is trifle because the frequency bandwidth of the original image is basically limited. To solve this problem, this paper proposes the digital image enlargement technique which interpolates the interpolation points of horizontal and vertical direction by weighting according to the direction of edge information with the component of FOI(First Order Interpolation)and output of the pseudomedian filter for image enlargement and interpolates the interpolation points of diagonal direction by selectively transposing the direction of the subwindows of the pseudomedian filter according to the distribution of neighbored pixels thereto in the extended image. According to the proposed methods, the digital image enlargement which preserves the characteristic of the pseudomedian filter capable of keeping the reconstruction of edge information and reflects the advantage of FOI can be performed. Therefore, visual artifacts could be effectively suppressed, and most characteristics and shape of the original image can be reconstructed as well.

• 한국유체기계학회 논문집
• /
• 제14권6호
• /
• pp.18-25
• /
• 2011

A boundary-layer pump with a single disk has been experimented to obtain its characteristic curve by changing the impeller of a centrifugal pump to a single disk. The primary objective to use of these types of pumps is to avoid hurting water life during transportation unnecessarily. The change of impeller should degrade the performance of pump, so we used the method to increase the roughness on the disk with sandpaper and mesh. The enhancement of shear force from the rotation of disk to the internal flow brought an augmentation of momentum transport, and the characteristics were far improved from the original single-disk pump without decreasing the survival rate of water life in the case of Pseudobagrus fulvidraco (bullhead fish). However, in the case of Artemia cyst (zooplankton), the survival rate was very degraded due to the micro scale smaller than turbulent eddy size. The result of this study could be used for the design of transportation and bio-filtering of water lying on a specific bandwidth of its scale of size.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2315-2326
• /
• 2016

This paper discusses the elimination of DC voltage deviation and the enhancement of load current sharing accuracy in multi-terminal high voltage direct current (MT-HVDC) systems. In order to minimize the power line losses in different parallel network topologies and to insure the stable operation of systems, a decentralized control method based on a modified droop control is presented in this paper. Averaging the DC output voltage and averaging the output current of two neighboring converters are employed to reduce the congestion of the communication network in a control system, and the decentralized control method is implemented. By minimizing the power loss of the cable, the optimal load current sharing proportion is derived in order to achieve rational current sharing among different converters. The validity of the proposed method using a low bandwidth communication (LBC) network for different topologies is verified. The influence of the parameters of the power cable on the control system stability is analyzed in detail. Finally, transient response simulations and experiments are performed to demonstrate the feasibility of the proposed control strategy for a MT-HVDC system.