• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1683-1689
• /
• 1999

We have implemented Frequency bandwidth expander with frequency upconverting by VCO drift canceller and comb generator. Te output of the low frequency synthesizer which the output frequency is 220~280MHz(Resolution : 5MHz) is expanded to 1660~2140MHz by this system. The phase noise of this system only depends on the phase noise of comb generator and low frequency synthesizer. The phase noise of VCO don’t influence at the frequency expander because the drift of VCO cancel out. When we control the output of VCO, the output frequency of this system is varied by 60MHz x N as filter banker. The switching time and the spurious of the frequency expander is below 3usec, -55dBc respectively. This system easily expands bandwidth additively by expanding the output bandwidth of the VCO. We can apply the frequency expander to very wide band microwave synthesizer which has fast switching time.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.441-446
• /
• 2003

Earlier efforts on optical access concentrated on the design of PONs for the collection and distribution portion of the access network. The PON architecture is very simple but it requires a MAC protocol for control of upstream traffic. The MAC protocol must support QoS (Quality of Service) administration function by various traffic class, efficient dynamic bandwidth assignment function, CDV (Ceil Delay Variation) minimization function etc. This paper proposes a dynamic bandwidth assignment algorithm of the MAC protocol for a broadband access network using an Ethernet Passive Optical Network supporting various traffic class. We compare our proposed with MDRR algorithm using simulation, and confirmed that our proposed Request-Counter algorithm produces shorter average cell delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1558-1563
• /
• 2007

In this paper, phase-locked loop (PLL) of a combinational architecture consisting of an adaptive bandwidth and fractional-N is presented to improve performances and reduce the order of ${\Delta}{\Sigma}$ modulator while maintaining equivalent or better performance with fast locking. The architecture of adaptive bandwidth PLL was simulated by HSPICE using 0.35m CMOS parameters. The behavioral simulation of the proposed adaptive bandwidth fractional-N PLL with a ${\Delta}{\Sigma}$ modulator was carried out by using MatLab to determine if the architecture could achieve the objectives. The HSPICE simulation showed that this type of PLL was able to fast locking, and reduce fractional spurs about 20dB.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.83.6-83
• /
• 2002

$\textbullet$ Disturbance observer $\textbullet$ Performance enhancement $\textbullet$ LFT formulation $\textbullet$ Structured singular value $\textbullet$ Maximum bandwidth of DOB $\textbullet$ DVD experiments $\textbullet$ Robust stable disturbance observer

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.28-34
• /
• 1998

In ATM networks CBR data traffic is sent in constant bit rate, and VBR data traffic in variable bit rate. Therefore unused bandwidth at network capacity may exist. To avoid waste of network resourcesm, ABR traffic utilizes the unused bandwidth to the utmost after CBR and VBR data traffic being first served. In this paper, a transfer rate-based congestion control algorithm is proposed for efficient ABR service in ATM networks. In the proposed algorithm the ATM switch first calculates bandwidth according to variable cell transfer rate in an ABR source. records this value in ER field in a RM cell, and then transmits a RM Cell to an ABR source. In this way the proposed algorithm dynamically allocates bandwidth to each ABR source, and the switch also can rapidly adapt to a change of a transfer rate of an source. The performance simulation of the proposed algorithm has batter performance in terms of source condition and link utilization.

• Smart Media Journal
• /
• v.4 no.3
• /
• pp.38-43
• /
• 2015

The increased number of smart devices leads users to share multimedia contents with others. Smart device users transmit multimedia files using apps. For multimedia file transfer under NAT (Network Address Translator), a lot of apps exploit a server with public IP or short range communication technologies such as WiFi Direct or Bluetooth because smart devices with private IP address cannot communicate each other directly. We first proposed the push service based file transmission scheme without an additional server and distance limitation. Second, for the push service based transmission, we proposed congestion control scheme to adapt transmission rate to the receiver's link bandwidth. Third, we considered bandwidth aware transmission for senders with different bandwidth. We implemented apps to evaluate the proposed scheme, and conducted experiments with smart devices.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.184-188
• /
• 2006

This paper presents DSP based narrow band satellite communication signal power detector for tracking control of mobile satellite antenna system. An analog filter based conventional power detector has poor performance due to frequency drift of carrier. Also, it is very difficult to change an analog filter bandwidth according to changed bandwidth of transmitted signal. To solve these difficulties, we proposed DSP based signal power detector, which is easy to change bandwidth of filter and to match shifted frequency of carrier. The proposed signal power detector consists of a FFT function to measure frequency drift of carrier, a programmable filter bank function to limit of received signal bandwidth and a power calculation function to measure power of filtered signal in 12-bit linear scale. Test results of implemented signal power detector, based on TMS320C5402 DSP, showed that it satisfied required functions and performances and properly operated.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.21-24
• /
• 2000

End-to-end congestion control mechanism have been critical to the robustness and stability of the Internet. Most of today's Internet traffic is TCP, and we expect this to remain so in the future. TCP/IP is the intermediate transport layer candidate for today's applications. TCP uses an adaptive window-based flow control. The congestion avoidance and control algorithms deployed by TCP aims at using the available network bandwidth. This paper compares different congestion control policies, and proposes the new design mechanism for future public networks

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.243-245
• /
• 2009

In recent years, a development of automotive embedded systems called Intelligent Vehicle are used for control and communication with CAN protocol. But as various devices and protocols are developed for Vehicle communication and control, it becomes difficult to manage the systems that contain limitation of bandwidth and various control requirement. To solve these problems, we introduce a research of automotive embedded systems which is considered the automotive real time operating system, automotive communications, and control systems.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.148-149
• /
• 2007

In this paper, an advanced torque control scheme of SRM using DITC(Direct Instantaneous Torque Control) and PWM(pulse width modulation) is investigated. The proposed DITC-PWM regulates a duty ratio of the phase switch according to the torque error and simple control rules of DITC without any hysteresis bandwidth. The proposed control method is verified by the simulations and experimental results.