• 제목/요약/키워드: bandpass filter

검색결과 573건 처리시간 0.033초

Microcomputer를 이용한 R-R Interval Analyzer 개발에 관한 연구 (1) (A Study on the Development of R-R Interval Analyzer using Microcomputer (1))

  • 이준하;최수봉
    • Journal of Yeungnam Medical Science
    • /
    • 제2권1호
    • /
    • pp.77-80
    • /
    • 1985
  • 심전도에 의한 R-R 간격변동은 자율신경계의 기능을 검사하는데 매우 유용하고 또한 교감 신경계와 부교감신경계의 가능을 정량적으로 알아낼 수 있을 것으로 사료되었다. 특히, 당뇨병질환에 있어서 자율신경계의 dysfunction현상을 고찰하는데 매우 유용할 것으로 기대된다(Fig.5 참조). 그러나 임상에 직접 적용시켜온 바로는 기립시, 심호흡시에 발생되는 근전도에 의한 잡음이 간혹 발생되는 경우가 있는데 이것은 전극접착법과 무선송신기에 의해 제거될 것으로 기대되며 향후의 과제로 남아있다.

  • PDF

메타재질 CRLH 구조를 이용한 넓은 차단 대역을 갖는 UHF WLAN용 소형 대역통과 여파기의 설계 (Miniaturized UHF WLAN Bandpass Filter Design for Wide Stopband Using the Metamaterial CRLH Structure)

  • 주정호;강승택
    • 대한전자공학회논문지TC
    • /
    • 제44권12호
    • /
    • pp.1-7
    • /
    • 2007
  • 본 논문에서는 WLAN(902MHz-928MHz)용 대역통과 여파기의 소형화와 향상된 차단대역 저지특성을 구현하기 위하여, 기존의 Right-Handed 전송선이 Left-Handed 특성을 가미한 복합구조를 이용하여 설계하였다. 대역통과 여파기의 unbalanced형 복합구조의 0차 공진기의 공진점을 사용하고 공진기간의 결합을 간편한 인버터 이론으로써 구현하였다. 제안된 기법의 타당성은 예측특성과 실험결과로써 확인되며, 평행결합 선로형과 같은 기존의 대역통과 여파기 보다 65% 이상 소형화됨을 알 수 있었다.

LTCC를 이용한 WLAN용 초소형 적층 대역통과 필터 설계 (Design of Miniaturized Multi-layer BPFs Using LTCC for Wireless LAN Applications)

  • 박훈;김근환;윤경식;이영철;박철순
    • 한국통신학회논문지
    • /
    • 제28권8A호
    • /
    • pp.607-612
    • /
    • 2003
  • 본 논문에서는 무선 통신 시스템의 SOP(System-On-Package)를 위하여 LTCC(Low Temperature Co-fired Ceramic)를 이용하여 다층구조의 초소형 병렬결합 대역통과 여파기를 제안하였다. 제작된 대역통과 여파기는 106$\mu\textrm{m}$의 두께인 LTCC sheet가 5층으로 구성되었고 크기는 5.24mm $\times$ 4.3mm$\times$ 0.53mm이다. 측정된 대역통과 여파기는 중심주파수 5.8GHz에서 200MHz의 대역폭을 가지며, 통과대역에서 13.679㏈의 반사손실과 2.326㏈의 삽입손실, 그리고 4.7GHz에서 28.052㏈의 감쇄특성을 갖는다.

메타재질구조의 UWB 전력 분배기를 이용한 광대역 배열 안테나를 위한 급전부 설계 (A Compact Feeding Structure for an Wide-band Array Antenna using a Microstrip Metamatreial UWB Power Divider)

  • 엄다정;강승택;박정훈
    • 전기학회논문지
    • /
    • 제61권8호
    • /
    • pp.1159-1163
    • /
    • 2012
  • In this paper, a new method is suggested to reduce the size of a wide-band array antenna. The power-divider for the feeding structure is made compact as ${\lambda}/8$ with the help of a novel Metamaterial UWB bandpass filter. This power divider is clearly different from others in that the proposed design uses microstrip structured Composite Right and Left-Handed (CRLH) filters, while others use two dielectric layers or long tapered transmission lines. In order to validate the proposed design method, the circuit and full-wave simulated results of the power divider with the Metamaterial UWB filters are compared to each other, and the Metamaterial properties of the structure are shown with the electric field at the ZOR and dispersion diagram. Furthermore, the antenna performance of the fabricated antenna with the power divider is measured and compared with the prediction. Also, the size reduction effect by the proposed scheme is addressed.

Wavelet 변환을 이용한 유발전위뇌파의 해석에 관한 연구 (A study on the analysis of evoked potentials using wavelet transform)

  • 이용희;최교환;이동규;유시영;이응구;김선일;이두수
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1996년도 춘계학술대회
    • /
    • pp.14-17
    • /
    • 1996
  • Evoked Potentials signals occur as a result of neuroelectric responses of the brain to sensory stimulation. In this paper, to analysis such signals we utilize a time-frequency analysis technique called wavelet transform. The wavelet analysis is performed based on a single prototype function,which can be thought of as a bandpass filter. Because the wavelet transform in a fine temporal analysis decomposes time-varying signals in EP into a dilated lowpass and a contracted highpass components, EP signal fetures can be obtained and analysed quantitatively at the levels of resolution. In the results, we analyze the VEP signal with the wavelet transform.

  • PDF

지오빗을 이용한 동해 가스하이드레이트 탄성파 자료처리 매개변수 분석 (Parameter analysis for gas hydrate data of East sea using Geobit)

  • 김영완;장성형;김현태;윤왕중
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.377-381
    • /
    • 2006
  • A seismic survey for gas hydrate have performed over the East sea by the KIGAM since 1997. General indicator of gas hydrate in seismic data is commonly inferred from the BSR(Bottom Simulating Reflector) that occurred parallel to the sea floor, amplitude decrease at the top of the BSR, amplitude blanking at the bottom of the BSR, decrease of the interval velocity and the reflection phase reversal at the BSR. In this paper we had analyzed optimum parameters of the field data to detect the 9as hydrate. Shot delay correction is applied 95ms, spherical divergence correction is applied velocity library 3, bandpass filter is applied 25-30-115-120Hz deconvolution operator length is applied 60ms, lag is 6ms and accurate velocity analysis NMO correction, stack is performed. Geobit 2.11.0 developed by the KIGAM was used for all data processing. Processing results say that the BSR occurred parallel to the sea floor were shown at 3,150m/s of two way travel time from the sea floor through shot point 5,000-5,610, and identified the interval velocity decrease around BSR and the reflection phase reversal corresponding to the reflection at the sea floor.

  • PDF

An Optical Pulse-Width Modulation Generator Using a Single-Mode Fabry-Pérot Laser Diode

  • Tran, Quoc-Hoai;Nakarmi, Bikash;Won, Yong Hyub
    • Journal of the Optical Society of Korea
    • /
    • 제19권3호
    • /
    • pp.255-259
    • /
    • 2015
  • We have proposed and experimentally verified a pulse-width modulation (PWM) generator which directly generated a PWM signal in the optical domain. Output waveforms were clear at the repetition rate of 16 MHz; the duty cycle (DC) was from 14.7% to 72.1%; and the DC-control resolution was about 4.399%/dB. The PWM generator' operation principle is based on the injection-locking property of a single-mode Fabry-$P{\acute{e}}rot$ laser diode (SMFP-LD). The SMFP-LD, which has a self-locked mode wavelength at ${\lambda}_{PWM}$, was used to detect the power of the injection-locking signal (optical analog input). If the analog input power is high, the SMFP-LD is locked to the wavelength of the input signal ${\lambda}_a$ and there is no output after an optical bandpass filter (OBF). If the analog input power is low, the SMFP-LD is unlocked and there is output signal at ${\lambda}_{PWM}$ after the OBF. Thus, the SMFP-LD plus the OBF provide digital output for an analog input. The DC of the output PWM signal can be controlled by tuning the power of the analog input.

MB-OFDM 방식의 UWB 시스템을 위한 CMOS LNA 설계 (Design of a CMOS LNA for MB-OFDM UWB Systems)

  • 이재경;강기섭;박종태;유종근
    • 한국정보통신학회논문지
    • /
    • 제10권1호
    • /
    • pp.117-122
    • /
    • 2006
  • 본 논문에서는 MB-OFDM 방식의 초광대역 시스템 응용을 위한 단일 단 cascode 구조의 CMOS 저잡음증폭기를 설계하였다. 광대역 ($3.1GHz\~4.9GHz$) 입력 매칭은 칩 면적과 잡음지수를 줄이기 위해 간단한 대역 통과 필터를 사용하여 수행하였다. $0.18{\mu}m$ CMOS 공정변수를 사용하여 모의실험 한 결과, 설계된 증폭기는 9.7dB의 최대 이득, $2.1GHz\~7.1GHz$의 3dB 대역폭, 2dB의 최소잡음지수, -2dBm의 IIP3, -11.8dB 이하의 입력 반사 손실 특성을 보이며, 1.8V 공급 전원전압에 25.8mW의 전력을 소모한다. 칩면적은 패드를 포함해서 $0.74mm^2$이다.

TFT-LCD 패널 검사를 위한 지역적 분별에 기반한 결함 영역 분할 알고리즘 (Segmentation of Defective Regions based on Logical Discernment and Multiple Windows for Inspection of TFT-LCD Panels)

  • 정건희;정창도;윤병주;이준재;박길흠
    • 한국멀티미디어학회논문지
    • /
    • 제15권2호
    • /
    • pp.204-214
    • /
    • 2012
  • 본 논문은 비전장비의 결함 검사 시스템을 위한 불균일한 휘도분포를 가지는 TFT-LCD 영상에서 결함 영역을 분할하는 방법을 다룬다. 불균일한 휘도분포 때문에 결함의 영역을 찾기 어려우며 이를 위해 많은 방법들이 제안되었다. Kamel과 Zhoa는 문자 및 그래픽의 분할을 위해 논리적 단계화 방법을 제안하였고, 이 방법은 공간상에서 수행되어지는 지역적 분할 방법으로 불균일한 분포 상에서도 문자가 잘 분할되는 장점이 있다. TFT-LCD의 저해상도 영상도 배경의 분포가 불균일하여 본 논문에서는 Kamel과 Zhoa의 방법을 답습하여 새로운 결함 영역 분할 방법을 제안한다. 제안한 방법은 결함주위에 발생하는 과검출(Ghost object)이 적은 장점이 있으며 제안 방법의 성능을 증명하기위해 실제 결함이 존재하는 TFT-LCD 영상을 이용하여 실험하고, 주파수상에서 많이 사용되는 FFT의 밴드패스 필터를 이용한 분할 방법과 비교하였다.

단락 개방 Calibration 방법을 이용한 분포 정수 소자의 기생 소자 추출 및 대역 통과 필터에의 응용 (A Parasitic Elements Extraction of the Distributed Elements and an Application of the BPF Using the Short-Open Calibration Method)

  • 김유선;남훈;임영석
    • 한국전자파학회논문지
    • /
    • 제20권2호
    • /
    • pp.115-123
    • /
    • 2009
  • 본 논문에서는 단락 개방 calibration(SOC) 방법을 이용하여 결함 접지 면을 갖는 전송 선로(DGS)와 short-circuited comb line section의 기생 소자 값들을 추출하였다. Microstrip 선로들로 구성된 단락, 개방, 분포 정수 소자의 산란 파라미터 행렬들은 전자기 시뮬레이터 및 벡터 네트웍 분석기를 이용하여 측정하였다. 제안된 구조의 전자기 영향들은 주파수 독립적인 소자들로 구성된 II형 또는 T형 등가 회로로 각각 표현하였고, 2 포트 네트웍 해석을 수행함으로써, 측정된 산란 파라미터들과 등가회로 소자들 간의 관계를 보였다. 또한, 2차 버터워스 프로토 타입을 갖는 2.4 GHz 대역 통과 필터 설계에 이를 적용하였다. 그 결과, 중심 주파수에서 측정된 $S_{11}$$S_{21}$은 각각 -20 dB, -1.3 dB 이고, $0.5{\sim}5\;GHz$에서 예상했던 결과와 5 % 이내의 오차를 보였다.