• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.172-177
• /
• 2004

In this paper, DGS(Defected Ground Structure) is applied to multi-layer structure using LTCC(Low Temperature Co-fired Ceramics). Sprial DGS is adopted in order for size-reduction and higher quality factor, the multi-layer DGS has the same characteristics as the planar DGS. Multi-layer bandpass filter of new shape is confiured using two multi-layer spiral DGS and is designed with no via-hole for the simple process. 5.25 GHz Wireless LAN bandpass filter is designed and fabricated, the insertion loss of the filter is measured less than 1.5 dB, and the size is 2.0 mm${\times}$1.2 mm${\times}$1.1 mm(L${\times}$W${\times}$H).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.84-90
• /
• 2011

In this paper, a dual-band pseudo-combline narrow bandpass filter is proposed. The proposed bandpass filter adopts the open resonant stubs and the proposed bandpass filter can be used for ITS(Intelligent Transport System) and X-band satellite systems application. The proposed bandpass filter has the insertion and return losses of 1.72 dB and 15.5 dB at the bandwidth of 3.6 % and center frequency of 5.8 GHz, respectively. Also, the second operating frequency band for insertion and return losses are 1.92 dB and 16.3 dB at the bandwidth of 3% and center frequency of 8.5 GHz, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.7-11
• /
• 2007

In this paper, we proposed the dual-mode stepped impedance ring resonator bandpass filter for MMIC (Microwave Monolithic Integrated Circuit) applications using the dielectric-supported air-gapped microstrip line (DAML). The ring resonator fabricated by surface micromachining technology. This filter consists of a DAML resonator layer and a CPW feed line. The DAML ring resonator is elevated with $10{\mu}m$ height from GaAs substrate surface. This bandpass filter is $1-{\lambda}g$ type stepped impedance ring resonator including dual-mode resonance. From the measurements, we obtained attenuation of over 15 dB and insertion loss of 2.65 dB at the center frequency of 97 GHz. Relative bandwidth is about 12 % at 97 GHz. Furthermore, the proposed bandpass filter is useful to integrate with conventional MMICs.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1922-1924
• /
• 1999

The purpose of this study is to establish the design theory of a DR ceramic bandpass filter used for basestations and to research on the design theory of bandpass filter. The design procedure is circuit parameters and structural parameters will be derived. It was observed that the filter characteristics at the simulations.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.202-206
• /
• 2001

In this paper a novel dielectric resonator (DR) bandpass filter (BPF) with flexible arrangement of attenuation poles is proposed. This DR filter is similar to a conventional DR filter except adding a microstrip line below a DR, which not only shifts the location of attenuation poles, but also improves skirt characteristics. The duplexer with the proposed DR BPF has been yielded better isolation and sharper skirt behavior than that with a conventional DR alter. The implemented duplexer has shown a good performance and been well agreed with the simulation.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.265-268
• /
• 2003

In this paper, we introduce the SIR typed bandpass filters in CPW structures for shifting spurious harmonic frequency into higher frequency band. And we proposed the effective feed structures for suppressing spurious frequency in the SIR typed CPW bandpass filters. The designed folded feed structures have lowpass filtering characteristic. They are very effective feed types in the CPW bandpass filters for suppressing harmonics. The measured results of the CPW bandpass filter with folded feed line shows that it has suppressed and wide out-of-band up to 5.8fo.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.924-930
• /
• 2003

In this paper, a novel miniaturized microstrip duplexer with attenuation pole is proposed. A three-pole microstrip CT(Cascade Trisection) two bandpass filters have each asymmetrically prescribed transmission zero are design and fabrication. This CT bandpass filter changes coupling structure, which not only shifts the location of attenuation poles but also improves skirt characteristics. The duplexer results of measurement with the cross coupling CT bandpass filters has been yielded better isolation and sharper skirt behavior than that with a conventional bandpass filter. The results of measurement are almost similar to those of simulation results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.18-24
• /
• 2003

The resonator using two layer microstrip structure was proposed and the bandpass filter was designed using this resonator in this paper. The proposed resonator structure is constructed by placing a U-shape of resonator in the first layer and then placing a broadside coupling strip in the second layer just above of the U-shape of resonator's edge part. Because these structure has various design parameters than general single layer coupled line structure, filter design is more flexible. In this paper, the narrow band filter was designed using multi-layer structure that had been applied to broadband filter because it's high coupling nature. The filter was designed to have 4MHz center frequency and 3 % fractional bandwidth, and finally confirmed that can be realizable narrow band filter by using multi-layer structure through fabrication and measurement.

• Progress in Superconductivity
• /
• v.2 no.2
• /
• pp.92-96
• /
• 2001

We have fabricated a modified hairpin-type YBa$_2$Cu$_3$O$_{7-{\delta}}$ (YBCO) 2-pole microstrip bandpass filter with the center frequency of 5.8 GHz. We designed a hairpin-type filter with interdigital-coupled inner poles to improve the filter performance. Compared to a typical hairpin-type filter of the same size, the center frequency, the bandwidth and the insertion loss appeared smaller by 14.5% ,29.6%, and 0.55 dB, respectively. The dimensions of the filter were 13.7mm ${\times}$3.3 mm. YBCO films deposited on r-cut sapphire buffered with a CeO$_2$thin layer were used fur making the filter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.104-109
• /
• 2012

In this paper, we propose a way to improve the quality of L-band wireless communication from unfriendly influential factors lying in the neighboring RF bands. The UHF-band system has resonator components and they generate harmonics as the spurious in the L-band. Therefore, a metamaterial CRLH bandpass filter is designed for the purpose of system miniaturization and smaller insertion loss, and its spurious phenomenon is observed in the frequency domain. And its harmonics in the L-band are suppressed by a compact bandstop filter whose equivalent circuit is newly developed. The design methodology is validated by the equivalent circuit to be compared with commercial full-wave EM software simulations, where the spurious is dropped by 20dB. Also, the advantage of the proposed design is presented by the comparison where our filter is much smaller than the conventional parallel edge coupled filter by over 50%, with excellent harmonic suppression.