• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.202-207
• /
• 2002

EOC (Electro-Optical Camera) of KOMPSAT-1 (Korea Multi-Purpose SATellite) has been producing land imageries of the world since January 2000. After image data are acquired by EOC, they are transmitted from satellite to ground via X-band RF signal. Then, EOC image data are generated and pass through radiometric and geometric corrections to generate standard products of EOC images. After radiometric correction on EOC image data, Modulation Transfer Function (MTF) compensation is applicable on EOC images with user's request for better image quality. MTF compensation is concerned with filtering EOC images to minimize the effect of degradations. For Image Receiving and Processing System (IRPE) at KOMPSAT Ground Station (KGS), Wiener filter is used in MTF compensation for EOC images. If the Pointing Spread Function (PSF) of EOC system is known, signal-to-noise power spectra ratio is the only factor in the determination of Wiener filter. In this paper, MTF compensation in IRPE at KGS is introduced and MTF compensated EOC 1R images are generated using Wiener filters with various signal-to-noise power spectra ratios. MTF compensated EOC 1R images are correlated with EOC 1R images for observing linearities between them. As a result, the effect of signal-to-noise power spectra ratio is shown on MTF compensated EOC 1R images.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.3
• /
• pp.108-112
• /
• 1984

Interactions between metal ions and chitosan in solution were studied by spectroscopic and viscometric measurements. $Cu^{++}$-chitosan complex exhibited an absorption band at 265 nm, whereas D-glucosamine complex showed one at 245 nm. The difference in ${\lambda}_{max}$ was attributed to the different amine to $Cu^{2+}$ ratios of the complexes, that is, 2 : 1 for chitosan and 1 : 1 for D-glucosamine. The molar absorptivities and binding constants of the complexes were evaluatatled. The binding of $Cu^{2+}$ to chitosan was cooperative near pH 5, and both intra- and intermolecular chelations depending on chitosan and $Cu^{2+}$concentrations were observed, The intermolecular chelation was stabilized by addition of salts. The cooperative intermolecular chelation of $Ni^{++}$ was also observed at pH 6.2. No significant binding of other divalent ions was observed. The reported high adsorption abilities of chitosan particles for these ions were attributed to the deposition of metal hydroxide aggregates in pores of chitosan particles rather than chelation to amine groups.

• Korean Journal of Remote Sensing
• /
• v.19 no.1
• /
• pp.43-52
• /
• 2003

EOC (Electro-Optical Camera) of KOMPSAT-1 (Korea Multi-Purpose SATellite) has been producing land imageries of the world since January 2000. After image data are acquired by EOC, they are transmitted from satellite to ground via X-band RF signal. Then, EOC image data are retrieved and pass through radiometric and geometric corrections to generate standard products of EOC images. After radiometric correction on EOC image data, Modulation Transfer Function (MTF) compensation is applicable on EOC images with user's request for better image quality. MTF compensation is concerned with filtering EOC images to minimize the effect of degradations. For Image Receiving and Processing System (IRPE) at KOMPSAT Ground Station (KGS), Wiener filter is used for MTF compensation of EOC images. If the Pointing Spread Function (PSF) of EOC system is known, signal-to-noise (SNR) power spectra ratio is the only variable which determines the shape of Wiener filter In this paper, MTF compensation in IRPE at KGS is briefly addressed, and MTF compensated EOC images are generated using Wiener filters with various SNR power spectra ratios. MTF compensated EOC images are compared with original EOC 1R images to observe correlations between them. As a result, the effect of SNR power spectra ratio on MTF compensated EOC images is shown.

• Smart Structures and Systems
• /
• v.2 no.2
• /
• pp.141-154
• /
• 2006

Recently, the Hilbert-Huang transform (HHT) has gained considerable attention as a novel technique of signal processing, which shows promise for the system identification and damage detection of structures. This study investigates the effectiveness and accuracy of the HHT method for the system identification and damage detection of structures through a series of experiments. A multi-degree-of-freedom (MDOF) structural model has been constructed with modular members, and the columns of the model can be replaced or removed to simulate damages at different locations with different severities. The measured response data of the structure due to an impulse loading is first decomposed into modal responses using the empirical mode decomposition (EMD) approach with a band-pass filter technique. Then, the Hilbert transform is subsequently applied to each modal response to obtain the instantaneous amplitude and phase angle time histories. A linear least-square fit procedure is used to identify the natural frequencies and damping ratios from the instantaneous amplitude and phase angle for each modal response. When the responses at all degrees of freedom are measured, the mode shape and the physical mass, damping and stiffness matrices of the structure can be determined. Based on a comparison of the stiffness of each story unit prior to and after the damage, the damage locations and severities can be identified. Experimental results demonstrate that the HHT method yields quite accurate results for engineering applications, providing a promising tool for structural health monitoring.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.35.2-35.2
• /
• 2018

Using the K-band Multi-object Spectrograph (KMOS) at the Very Large Telescope (VLT), the KMOS Redshift One Spectroscopic Survey (KROSS) has gathered integral-field data for ~800 star-forming galaxies at a redshift z~1, when the universe was roughly half its current age and forming the bulk of its stars. With spatially-resolved observations, KROSS reveals galaxies that are both gas-rich and highly turbulent. It is possible to derive the observed and baryonic Tully-Fisher (luminosity - rotation velocity) relations, thus constraining the mass-to-light ratios and total (luminous + dark) masses of the galaxies. This in turn highlights the dependence of the relation zero-point on the degree of rotational support of the galaxies (rotational velocity to velocity dispersion ratio). By degrading and analogously analysing integral-field data of hundreds of local galaxies from the Sydney-AAO Multi-object Integral-field Spectrograph (SAMI) survey, a robust comparison z=0 Tully-Fisher relation can also be derived, thus further constraining the luminous and dark mass growth of disk galaxies over the last 7 billions years. This unique comparison also reveals that systematic effects associated with sample selection and analysis methods are as large as the effects expected from cosmological evolution, and thus that most other comparisons employing heterogeneous data and/or methods can safely be ignored.

• Textile Coloration and Finishing
• /
• v.33 no.3
• /
• pp.147-152
• /
• 2021

Bulk polymerization was used to produce poly(vinyl acetate) with different molecular weights, which were then saponified to prepare poly(vinyl alcohol) (PVA) with different molecular weights. With P_n of 2,060 and 3,240, the optimum film formation concentrations of PVA were found 7.5wt.% and 6.5wt.%, respectively. The drawing characteristics of the PVA film prepared at the optimum film formation concentrations were experimented, as well as the thermal characteristics of the PVA film based on the drawing ratio were observed. When the drawing velocity was fixed, it was found that the drawing ratios of all samples decreased as the heat band gap increased, and the melting temperature of the PVA film slightly increased as the drawing ratio increased regardless of the P_n of PVA.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.10 no.1
• /
• pp.27-37
• /
• 1981

The effect in degree of saturation and unsaturation of dietary added oils on the serum cholesterol level in the rabbit was studied for a kperiod of 4 weeks using isocalories and isonitrogenous diets. The subject rabbits were divided into 10 feeding groups such as control-1 (Basal diet only), A group (Basal+sesame oil), B group (Basal+perilla oil), C group (Basal+soybean oil), D group (Basal+rice bran oil), Control-A(Basal+casein), A-1 group (Basal+sesame oil+ casein), B-1 group (Basal+perilla oil+casein), C-1 group (Basal+soybean oil+casein) and D-1 group (Basal+rice bran oil+casein). The results are summarized as follows: 1. Body weight gains per week of the perilla oil fed group were higher than anyother groups during the experimental period. 2. Food efficiency ratios for the group of perilla oil fed were 1.041, 0.781, 0.520 and 0.431 for 1st, 2nd, 3rd and 4th week, respectively. 3. In the group of perilla oil and Casein fed, food efficiency ratios for the experimental period were 0.887, 0.823, 0.489 and 0.437 for 1st, 2nd, 3rd and 4th week, respectively. 4. It is investigated that the food efficiency ratio for perilla oil fed groups was higher than the group of perilla oil and casein fed. 5. Calorie efficiency ratios for perilla oil fed group were 0.018, 0.036, 0.024 and 0.020 for 1st, 2nd, 3rd and 4th week, respectively. Calorie efficiency ratios for perilla oil and casein fed group were 0.028, 0.030, 0.024 and 0.020 for 1st, 2nd, 3rd and 4th week, respectively. 6. Serum cholesterol was 72.8mg% for the group of perilla oil (6gr) and casein(6gr) fed, and liver cholesterol was 460.5mg% for the same group. 7. Serum triglyceride was 130.7mg% for the group of perilla oil (6gr) and casein (6gr) fed. 8. Blood glucose was 40.34mg% for control-l and 96.4mg% for control-A, respectively. Blood glucose was 120.4mg% for group Band 1l0.7mg% for group B-1, respectively. 9. The degree of saturation/unsaturation for perilla oil (SFA/USFA) was 7.8/92.2 and nonessential fatty acid/essential fatty acid(NEFA/EFA) was 26.3/73.7. In this conditions, serum and liver cholesterol was lower than anyother conditions for this experimental period. 10. For the perilla oil fed group, serum cholesterol was 105.5mg% for pleic acid/linoleic acid(18.5/58.5) and 72.8mg% for linoleic acid/linolenic acid(15.2/58.5). In this group, triglyceride was 132.5mg% for oleic acid/linoleic acid and 130.5mg% for linoleic acid/linolenic acid. 11. There are positive correlation between serum cholesterol and saturated fatty acid $({\gamma}=0.78)$, and unessential fatty acid $({\gamma}=0.41)$. There are negative correlation between serum cholesterol and unsaturated fatty acid$({\gamma}=-0.78)$ and essential fatty acid$({\gamma}=0.77)$, respectively. 12. The range of most effective diet for serum cholesterol level lowering was nonessential fatty acid/essential fatty acid(26.3/73.7), saturated fatty acid/unsaturated fatty acid(7.8/92.2) and added oil (6gr)/added casein protein(6gr).

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.264-270
• /
• 2016

This Study is to into fuel using a torrefation reaction to food waste. When the fuel of only food waste alone, fuel value is was performed at a ratio of sewage sludge constant attempts to prevent low. Mixing ratios of food waste and sewage sludge, 10:0, 8:2, 6:4, 5:5. Regardless mixing ratio, it was possible to confirm that decreases the moisture content of 10% or less at a reaction temperature of $240^{\circ}C$ or higher. As the ratio of the reaction temperature and the sewage sludge is high, the fixed carbon content is increased. It was measured at up to 36%(mixing ratios6:4, reaction temperature $270^{\circ}C$) from the initial 1.1%. From the reaction temperature $240^{\circ}C$ satisfied with 3000Kcal/Kg or more is a SRF criteria shows the calorific value. It was possible to obtain a heating value that is increased from the raw sample approximately sextuple. As reaction temperature is heightened, Van krevelen Diagram moved to the range of Lignite range. It was possible to obtain high fuel ratio and 5,500Kcal/kg or less of a combustility index as the sewage sludge mixing ratio becomes high. Increase the fixed carbon content, than those food waste alone solid fuel into and improved fuel costs, it is necessary to ensure that the quality of the fuel is improved.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.199-208
• /
• 2010

A friction damper installed at a building shows nonlinear behavior since its stick and slip states are occurred repeatedly depending on the amplitude of external loadings to dissipate input energy. Friction damping is existed for the building with a friction damper. In additionally viscous one is inherently included. Therefore, the building installed in such combined damping is quite involved to find the analytical solution. In this study, first, displacement and acceleration characteristics are identified based on the exact solution for a single-degree-freedom building with a friction damper having both friction and viscous damping. Second, in free vibration, the equivalent viscous damping ratio is obtained by the energy dissipation. Third, numerical analysis is carried out to find response configuration with various friction force ratios. Fourth, corresponding equivalent viscous damping ratio is derived with the finding that the response reaches into steady-state for both friction and viscous damped structure. It is deduced using balance of input external energy and output dissipation energy for steady-state response. Finally, the equivalent viscous damping ratios of free or harmonic vibration are verified through nonlinear analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1138-1146
• /
• 2005

This paper makes a study of a formulation of net filter discrimination(NFD) and its computation for analyzing adjacent channel interference and suggests a systematic algorithm for calculating protection ratios of co-channel and adjacent channel applicable to frequency coordination in the fixed radio relay networks. It is shown that adjacent channel protection ratio can be derived from two factors: One is NFD depending upon receiver filter characteristic as well as transmitter spectrum mask and the other is co-channel protection ratio given by a function of fade margin, modulation scheme, and allowable interference. Actually to show the computing procedure from transmitter spectrum mask and receiver filter characteristic, NFD has been obtained for channel bandwidth of 29.65 and 40 MHz at 6.2 and 6.7 GHz band, respectively. According to the results, NFDs at the first adjacent channel of 29.65 and 40 MHz provide 27.4 and 28.9 dB, respectively. From these data, adjacent channel protection ratios corresponding to each channel bandwidth yield 47.5 and 46.3 dB for a given 64-QAM and 60 km. The proposed method gives some merits of an easy calculation, systematic extension, and applying the same concept to frequency coordination in millimeter radio relay networks.