• 한국전자파학회논문지
• /
• 제26권12호
• /
• pp.1083-1090
• /
• 2015

Ka 대역의 25 W급 SSPA를 제작하기 위하여 상용 $0.15{\mu}m$ GaN 공정을 이용 구동증폭기(Drive Amplifier : DRA) 및 고출력증폭기(High Power Amplifier : HPA) 초고주파 단일 집적회로(Monolithic Microwave Integrated Circuit : MMIC)를 설계 및 제작하여 특성 평가하였고, SSPA(Solid State Power Amplifier)의 주요 부속품인 MS-to-WR28 변환기 및 WR28 전력합성기를 설계 및 제작, 평가하여 Ka 대역 GaN 기반 SSPA를 제작하였다. 제작 결과, 주파수 29~31 GHz 대역에서 포화출력 44.2 dBm 이상, 전력부가효율 16.6 % 이상, 전력이득 39.2 dB의 특성을 나타내었다.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2268-2272
• /
• 2010

This letter presents that a rectenna can utilize more stable wireless power by using a new design dual band/dual polarization microstrip patch antenna and 2 stage voltage multiplier at 2.4 GHz band and 3.1 GHz band. The proposed antenna is a new microstrip patch antenna design to make impedance matching possible by using slotted capacitive coupling between the patch and $50\Omega$ feed line on a ground plane. Its advantage is that the size of the rectenna can be reduced by using $50\Omega$ feed line on the ground plane, which can be used efficiently. The dual band/dual polarization microstrip patch antenna shows circular polarization at 2.4 GHz band and linear polarization at 3.1 GHz band. Under -10 dB return loss, The dual band/dual polarization microstrip patch antenna obtains 340 MHz bandwidth as 2.23~2.57 GHz and 375 MHz bandwidth as 2.95~3.325 GHz. Also, 2 Stage Voltage multiplier is possible to operate at 2.4 GHz band and 3.1 GHz band. The designed retenna can usually obtain wireless power at both 3.1 GHz band, and 2.4 GHz band applications such as Wi-Fi, Bluetooth, Wireless LAN, etc. So more stable wireless power can be utilized at the same time.

• ETRI Journal
• /
• 제23권1호
• /
• pp.1-8
• /
• 2001

The performance of a long wavelength-band erbium-doped fiber amplifier (L-band EDFA) using 1530nm-band pumping has been studied. A 1530nm-band pump source is built using a tunable light source and two C-band EDFAs in cascaded configuration, which is able to deliver a maximum output power of 23dBm. Gain coefficient and noise figure (NF) of the L-band EDFA are measured for pump wavelengths between 1530nm and 1560nm. The gain coefficient with a 1545nm pump is more than twice as large as with a 1480nm pump. It indicates that the L-band EDFA consumes low power. The noise figure of 1530nm pump is 6.36dB at worst, which is 0.75dB higher than that of 1480nm pumped EDFA. The optimum pump wavelength range to obtain high gain and low NF in the 1530nm band appears to be between 1530nm and 1540nm. Gain spectra as a function of a pump wavelength have bandwidth of more than 10nm so that a broadband pump source can be used as 1530nm-band pump. The L-band EDFA is also tested for WDM signals. Flat Gain bandwidth is 32nm from 1571.5 to 1603.5nm within 1dB excursion at input signal of -10dBm/ch. These results demonstrate that 1530nm-band pump can be used as a new efficient pump source for L-band EDFAs.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.588-591
• /
• 2009

We had experimental studies of microwave output generator. We experimented with a corrugate-shped K-band slow wave guide in the backward wave oscillator. It generated output 표 interaction between electron beam's generation and magnetic field. We estimated oscillation frequency at 24GHz by changing propagation velocity and group velocity. We identified movement by second harmonic of Cherencov interaction and slow cyclotron mode. In our study we achieved oscillation stabilization, generation of long pulse, improvement of oscillation efficiency and output.

• 한국통신학회논문지
• /
• 제21권11호
• /
• pp.2932-2941
• /
• 1996

Conventional non-regenerative satellite repeaters do not provide anti-jamming capability enough to provide communications between small terminals in jamming environment. In this paper, we analyze the budget and system requirements for Ka-band satellite communication. For the analysis, we modeled and simulated the Ka-band satellite system based on downlink power limited repeater. Assuming that a spread spectrum is applied for anti-jamming purpose, we also analyzed a tolerable jammer-to-signal power ratio under strong up-link jamming in the bit rates of 2.4Kbps and 19.6Kbps.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.813-816
• /
• 1999

본 논문에서는 KOMPSAT에 사용할 S-band 위성중계기 (RF transponder)에 사용되는 Power Amplifier에 대한 설계와 제작에 대하여 논하고자 한다. 또한 이 설계에 대한 검증을 수행하기 위하여 impact analysis 와 기본적인 이론을 정리 한 후 모의 설계를 통해 설계 가능성을 검토하였다. 현재 당사가 개발 추진중인 다목적 실용 위성 ( KOMPSAT) 에 이용될 S-band Transponder 의 주파수는 uplink 2099.5㎒ 와 downlink 2280㎒를 근간으로 설계하였으며, 회로 시뮬레이션을 위해 사용된 software는 ADS(advanced Design System : HP) 및 ISSPICE 4 E.2 이며, Monte Carlo Analysis funtion 을 이용하여 대수학적으로 전개하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.355-358
• /
• 2002

This paper describe the passive intermodulation products(PIMs) which are formed in high power Ku-band transponder and antenna subsystem on the Communication St Broadcasting Satellite(CBS)program when two transmit carriers beat together to generate harmonics that fall into the receive band. How the PIMs are initially generated and the effect of PIMs for Ku-Band payload system are analyzed by calculating the PIMs frequencies and the power level of PIMs.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.985-996
• /
• 2018

The implementation and performance evaluation of an interleaved boundary conduction mode (BCM) boost power factor correction (PFC) converter is presented in this paper by employing three wide band-gap switching devices: a super junction silicon (Si) MOSFET, a silicon carbide (SiC) MOSFET and a gallium nitride (GaN) high electron mobility transistor (HEMT). The practical considerations for adopting wide band-gap switching devices to BCM boost PFC converters are also addressed. These considerations include the gate drive circuit design and the PCB layout technique for the reliable and efficient operation of a GaN HEMT. In this paper it will be shown that the GaN HEMT exhibits the superior switching characteristics and pronounces its merits at high-frequency operations. The efficiency improvement with the GaN HEMT and its application potentials for high power density/low profile BCM boost PFC converters are demonstrated.

• Korean Journal of Acupuncture
• /
• 제21권1호
• /
• pp.29-40
• /
• 2004

Objectives : The aim of this study was to examine the effects of electroacupuncture(EA) at the $H_7$ (Shinmun) on normal humans using power spectral analysis. Methods : EEG power spectrum exhibit site-specific and state-related differences in specific frequency bands. In this study, power spectrum was used as a measure of complexity. 32 channel EEG study was carried out in 9 subjects (9 males; age=25,8 years). Results : In alpha band, the power values at Fp2 channels(p<0.05) during the $H_7-acupoint$ treatment significantly were decreased. In beta band, the power values at Fp1, Fp2 channels(p<0.05) during the $H_7-acupoint$ treatment significantly were decreased. In delta and theta band, the power values at the $H_7-acupoint$ treatment significantly was increased than the before-acupuncture treatment. Conclusions : This results suggest that electroacupuncture at the $H_7$ is significantly in beta band of EEG.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권4호
• /
• pp.426-432
• /
• 2012

A fully-integrated low power K-band radar transceiver in 130 nm CMOS process is presented. It consists of a low-noise amplifier (LNA), a down-conversion mixer, a power amplifier (PA), and a frequency synthesizer with injection locked buffer for driving mixer and PA. The receiver front-end provides a conversion gain of 19 dB. The LNA achieves a power gain of 15 dB and noise figure of 5.4 dB, and the PA has an output power of 9 dBm. The phase noise of VCO is -90 dBc/Hz at 1-MHz offset. The total dc power dissipation of the transceiver is 142 mW and the size of the chip is only $1.2{\times}1.4mm^2$.