• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.33-37
• /
• 2009

In this paper, a printed small Ultra-Wideband (UWB) antenna with directive radiation characteristics based on combination of electric-magnetic radiators is presented. The combinations of the electric and magnetic type antennas result in the directive radiation patterns for all observed UWB frequency band. Simple combination of dipole antenna and loop antenna is also presented to show that proper configuration of electric radiator and magnetic radiator can produces directive radiation characteristics. The target frequency is from 3.1 GHz to 10.6 GHz with size of $15\;mm{\times}31\;mm$. A proto-type of the combined antenna is simulated, fabricated and measured. Simulation and experimental results of input impedance and gain characteristics of the proposed antenna are presented. There are good agreements between the simulated and measured VSWR curves. Also, the results show the directive radiation characteristics with small antenna form factor over the target frequency range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1259-1268
• /
• 2010

In this paper, we presented a new LC prototype synthesis method for the multi-band filter. For synthesis a multi-band filter with the required frequency response, we proposed the diagram of poles and zeros, also, we proposed the optimization process for finding the combination of optimized poles and zeros. From the transfer and reflection functions calculated from poles and zeros, we performed the quasi-elliptic LC prototype synthesis of multi-band filter. Using the proposed LC prototype synthesis method of multi-band filter, dual-band filter operating at GSM(880~960 MHz) and ISM(2,400~2,500 MHz) and triple-band filter operating at GSM(880~960 MHz) and ISM(2,400~2,500, 5,725~5,850 MHz) were designed and fabricated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3608-3613
• /
• 2009

In this paper, we propose a mobile Radio Frequency Identification antenna for mobile hand set. The proposed antenna with directive radiation characteristics based on combination of electric-magnetic radiators can be installed in the mobile hand-set. The combination of PIFA antenna for electric radiator and loop antenna for magnetic radiator is presented and designed for료 m-RFID reader system. Target frequency band is 900-MHz band. and desired gain is 4dBi. The antenna is simulated using Ansoft HFSS software and shows expected results. The antenna is also manufactured using FR4-epoxy circuit board (h=1 mm, $\varepsilon_{\tau}=4.4$). There are good agreements between the simulated and measured VSWR curves and radiation characteristics.

• Journal of Veterinary Clinics
• /
• v.19 no.2
• /
• pp.174-185
• /
• 2002

We investigated the effects of yohimbine and atipamezole in dogs anesthetized with xylazine-ketamine combination on electroencephalography (EEG) . Experiment groups were divided into three according to antagonists . Saline (1 ml) was used as an antagonist in group C, yohimbine (0.1 mg/kg) in group Y and atipamezole (50 ug/kg) in group A. Each group consisted of 5 dogs. Glycopyrrolate was injected 15 minutes prior to xylazine injection. Xylazine (1.1 mg/kg, IM) and ketamime (10 mg/kg, IV) were injected with the interval of 10 minutes. After 15 minutes, antagonists were administered intravenously. For EEG measurements, a recording electrode was positioned at Cz, which was applied to International 10-20 system. Heart rates, body temperature, respiratory rates, arterial blood pressure, $PaO_2$$PaCO_2$$PaCO_2$ at S4 in group Y was significantly decreased(p<0.05). Changes of electrolytes were not significant, except value of $Cl^-$ at S3 in group A. Mean head-up time (the time dogs showing head-up movement after antagonist injection, minutes) was $38.23^{\circ}$ae6.46 in group C, 2.54 $\pm$ 0.93 in group Y and 2.12$\pm$ 1.32 in group A. Mean sternal recumbent time (the time dogs showing sternal recumbency after antagonist injection, minutes) was 45.93$\pm$ 10.27 in group C, 11.91 $\pm$ 7.19 in group Y and 9.88$\pm$ 3.38 in group A. Mean walking time (minutes) was 53.49$\pm$ 9.21 in group C, 22.10$\pm$ 11.10 in group Y and 18.48$\pm$ 4.39 in group A. In group Y all dogs showed excitation and muscle rigidity in emergence. In group A, two dogs were also showed excitation and muscle rigidity, but were weaker than those of group Y.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.1
• /
• pp.27-33
• /
• 2001

SDD(Secchi disk depth) algorithm were composed of SeaWiFS bands combination using in-water optical data sets obtained Lake Sihwa, Kyungki Bay, Chunsu Bay, and Chinhae Bay. SDD algorithm were compared with in-situ data. Reflectance band ratio, $R_{rs}$(490/665) had the highest correlation($R^2$=0.8188) with in-situ data. For in-water algorithm applied to satellite data, reflectance band ratios of Landsat TM data were calculated. However, the results of applied Landsat TM had the low correlation, these reason were discussed in this paper.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.1
• /
• pp.350-364
• /
• 2022

Traditionally, in multi-user multi-carrier systems, the neighboring subband will be gapped by one subcarrier, which is set as guard band to reduce multiple access interference (MAI) between neighboring subbands. The empty subcarrier for guard band will degrade the spectral efficiency of the whole system. In order to enhance the spectral efficiency of multi-user filter bank multiple carrier (FBMC) systems, a new subband allocation method is introduced, in which the neighboring subband is gapped by half subcarrier instead of one subcarrier. Meanwhile, in order to implement the proposed resource allocation scheme, an optimized FBMC prototype filter is designed to decrease the inter-subband interference to the neighboring subband. The detailed simulations about the comparison between the proposed spectrum assignment and traditional FBMC are given, as well as the performance in the different interference scenarios. The simulation results show that the combination of the proposed spectrum assignment scheme and the optimized filter has better performance compared to the traditional scheme. The proposed scheme can be used in the system which serves massive users to get higher spectrum efficiency.

• Journal of electromagnetic engineering and science
• /
• v.11 no.2
• /
• pp.76-82
• /
• 2011

In this paper, a novel design for a dual-band negative group delay circuit (NGDC) is proposed. Composite right/left-handed (CRLH) ${\lambda}/4$ short stubs are employed as a dual-band resonator. A CRLH ${\lambda}/4$ short stub is composed of a typical transmission line element as the right-handed component and a high-pass lumped element section as the left-handed component. It is possible to simultaneously obtain open impedances at two separate frequencies by the combination of distinctive phase responses of the right/left-handed components. Negative group delay (NGD) can be obtained at two frequencies by using dual-band characteristics of the CRLH stub. In order to achieve a bandwidth extension, the proposed structure consists of a two-stage dual-band NGDC with different center frequencies connected in a cascade. According to the experiment performed, with wide-band code division multiple access (WCDMA) and worldwide interoperability for microwave access (WiMAX), NGDs of $-3.0{\pm}0.4$ ns and $-3.1{\pm}0.5$ ns are obtained at 2.12~2.16 GHz and 3.46~3.54 GHz, respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.1
• /
• pp.88-95
• /
• 2015

For the frequency-domain spectral fatigue analysis, the probability density function of stress range needs to be estimated based on the stress spectrum only, which is a frequency domain representation of the response. The probability distribution of the stress range of the narrow-band spectrum is known to follow the Rayleigh distribution, however the PDF of wide-band spectrum is difficult to define with clarity due to the complicated fluctuation pattern of spectrum. In this paper, efforts have been made to figure out the links between the probability density function of stress range to the structural response of wide-band Gaussian random process. An artificial neural network scheme, known as one of the most powerful system identification methods, was used to identify the multivariate functional relationship between the idealized wide-band spectrums and resulting probability density functions. To achieve this, the spectrums were idealized as a superposition of two triangles with arbitrary location, height and width, targeting to comprise wide-band spectrum, and the probability density functions were represented by the linear combination of equally spaced Gaussian basis functions. To train the network under supervision, varieties of different wide-band spectrums were assumed and the converged probability density function of the stress range was derived using the rainflow counting method and all these data sets were fed into the three layer perceptron model. This nonlinear least square problem was solved using Levenberg-Marquardt algorithm with regularization term included. It was proven that the network trained using the given data set could reproduce the probability density function of arbitrary wide-band spectrum of two triangles with great success.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.4
• /
• pp.299-307
• /
• 2011

The offshore plants such as FPSO are subjected to combination loading of environmental conditions (swell, wave, wind and current). Therefore the fatigue damage is occurred in the operation time because the units encounter the environmental phenomena and the structural configurations are complicated. This paper is a research for frequency domain fatigue analysis of wide-band random loading focused on accuracy of fatigue damage estimation regarding the proposed methods. We selected ideal bi-modal spectrum. And comparison between time-domain fatigue analysis and frequency-domain fatigue analyses are conducted through the fatigue damage ratio. Fatigue damage ratios according to Vanmarcke's bandwidth parameter are founded for wide-band. Considering safety, we recommend that Jiao-Moan and Tovo-Benasciutti methods are optimal way at the fatigue design for wide-band response. But, it is important that these methods based on frequency-domain unstably change the accuracy according to the material parameter of S-N curve. This study will be background and guidance for the new frequency-domain fatigue analysis development in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10C
• /
• pp.965-975
• /
• 2005

In this paper, we propose and evaluate joint carrier and sampling frequency offset estimation schemes based on the channel estimation sequences in PLCP (Physical Layer Convergence Procedure) preamble for the proper and effcient synchronization of the MB-OFDM WB (Multi-Band Orthogonal Frequency Division Multiplexing Ultra Wide Band) systems which have recently drawn explosive attention for future W-PAN (Wireless Personal Area Network) applications. In the joint estimation schemes, we first estimate the sampling frequency offset, and then estimate the carrier frequency offset using the estimated sampling frequency offset. Moreover, to improve the reliability of the estimated offset values, each process uses a combination scheme based on weighting factors. Simulation results using IEEE 802.15 Task Group 3a UWB channel models reveal that the estimation scheme using the simple weighting factors based on easily-measurable received signal power of each sub-channel shows favorably comparable performance to the ideal scheme using the weighting factors based on the perfectly-estimated frequency response of the channel.