• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.101-104
• /
• 2001

In this paper, we have analyzed algorithm about physical layer, data link layer and MAC layer of out-of-band specified in the DVS 178 and designed architecture of Out-of-band processor. Out-of-band processor extracts session key information from EMM packet to descramble MPEG-2 TS packet scrambled. Also, analyze EAS Packet including emergency alert information to provide emergency communications such as national emergency. In this paper, we have implemented prototype board for out-of-band processor.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.64-67
• /
• 2003

This paper presents the design of dual-band VCO using PBG structure for IEEE 802.11A/B. By adding switch circuit to the single-band VCO, we could achieve a dual-band VCO. The center frequencies of dual-band VCO are 5.93GHz(-13dBm) and 2.37GHz (3.50dBm). The phase noise is improved about l0dB by using PBG Structure.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.2
• /
• pp.151-158
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite, which has very wide band frequency characteristics, is proposed and discussed. The wide band electroma-gnetic wave absorber can be designed by the proposed equivalent material constants method for the re-gions varying spatially in the shape of ferrite. Futhermore, the wide band ferrite electromagnetic wave absorber with taper, which have not only exce-llent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity, were designed.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.290-291
• /
• 2013

Ab initio DFT 계산을 통해서 $Si/SiO_2$ 계면의 Band offset을 계산 했다. Si과 $SiO_2$ 각각의 물질을 계산한 결과로 얻은 로컬 퍼텐셜을 기준으로 Valence band와 Conduction band의 band edge의 위치를 결정할 수 있다. 그리고 계면 계산으로 얻은 로컬포텐셜을 이용하여 두물질의 로컬 퍼텐셜의 상대적인 위치를 결정할 수 있고 이를 이용하여 Band offset을 결정 할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.1872-1879
• /
• 1994

The design and implementation of Ku-Band frequency synthesizer was accomplished by the use of PLL and frquency multiple method. Design procedure and operation characteristics of PLL circuit were analyzed on the basis of control theory to synthesize about 1 GHz frequency which should be stable. By connecting frequency doubler and frequency eighth multiplier to the designed PLL circuit in series, Ku-Band frequency was synthesized. The validity of design method of Ku-Band frequency synthesizer was verified through experimental results.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.39-44
• /
• 2010

In this paper, a compact wideband antenna with a band-notch function is proposed. It operates over the UWB band with a band-stop characteristic. To increase the impedance bandwidth, a ring-shaped radiator is used. By attaching a circular stub to the ring-shaped radiator, the band-notch performance is obtained. The proposed antenna operates over a frequency range from 2.7 GHz to 11 GHz to satisfy the 10-dB return-loss requirement and provides band-stop performance in the frequency band from 5.15 GHz to 6.1 GHz. Experimental results reveal that the proposed antenna exhibits good radiation performance and is suitable for UWB applications.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.1
• /
• pp.18-23
• /
• 2009

The conventional channel selection method for a ZigBee communication network basically detects the energy values in all channels. In the ISM band, no license is required to use channels in this band, so there may exist various interference factors in this band. It is well known that WLAN is the major interference factor degrading the performance of ZigBee in the ISM band. In this paper, we propose an efficient channel selection algorithm which uses the pattern of two types of WLAN channel uses as the a priori information of IEEE 802.11 band IEEE 802.11g. By using the proposed algorithm, we may save the time required to select channels for the ZigBee communications.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.784-792
• /
• 1990

In this paper, attempts have been made to compare the subjective performance of sub-band coding (SBC) techniques incorporating four representative modulation transfer functions (MTF's) of th human visual system(HVS): Sakrison, Nill, Ngan, and Rao. In SBC, the frequency band of input signal is split into 16 equal sub-bands. In addition, 28 sub-band splitting schemd which splits more sub-bands in low spatial frequency is considered to compare the 4 MTF's effectively. In encoding of each sub-band, the weight of each sub-band obtained from the MTF of HVS is applied to bit allocation process which minimize the weighted mean square error (WMSE). The differential pulse code modulation(DPCM) coder is used to encode the lowest sub-band and the pulse code modulation(PCM) coder is used for the rest of sub-bands. It is found that the images incorporating the MTF of Rao yields the best results in subjective criteria, followed by Ngan, Nill, Sakrison, and the images not employing the HVS.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.332-335
• /
• 2008

Newly developing SAR (Synthetic Aperture Radar) sensors commonly include high resolution X-band those data are expected to contribute various applications. Recent few studies are presenting potential of X-band SAR data in forest related application. This study tried to investigate the relationship between forest stand parameters and multi-band SAR normalized backscattering. Multi-band SAR data was radiometric corrected to compare signal from different forest stand condition. Then correlation coefficients were estimated between attribute of forest stand map and normalized backscattering coefficients. Although overall correlation coefficients are not high, only X-band shows strong relationship with DBH class than other bands. The signal of C- and L-band is composed of a large number of discrete tree components such as leaves, stems, even background soil. In forest, strength of radar backscattering is affected by complex parameters. Further study might be considered more various forest stand parameters such as canopy density, stand height, volume, and biomass.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.793-799
• /
• 2018

An improved design of Ultra Wide Band(UWB) Bow-Tie antenna, which can control an enhanced wide stop-band, is presented. The mutually coupled slot-pair improves and controls the rejection band. The UWB antenna is composed of an electromagnetically coupled Bow-Tie patch and a parasitic ground patch, whose working frequency is extended to full UWB range in this work. By adding slot-pairs on the main patch and optimizing, they can give any requested wide rejection bands and sharp skirt characteristics, as is often required for UWB antennas and multi-band antennas. All the parameters are precisely calculated by an adequate optimization method. The Particle Swarm Optimization(PSO) technique is appropriately adopted. The proposed design and method is proved to give and control the sharp-skirt wide stop-band to UWB Bow-Tie antennas.