• 한국수산과학회지
• /
• 제38권5호
• /
• pp.281-285
• /
• 2005

Raw meat of mackerel (Scomber japonicus) was salted by refined, sun-dried, bamboo, and KC1-added bamboo salts. Antimutagenic activity on N-methyl-N'-nitro-N-nitrosoguanidine (MNNG) in Ames test and growth inhibitory effects of AGS human gastric and HT-29 human colon adenocarcinoma cells were investigated using methanol extracts of the salted mackerels. Mackerel salted sun-dried, bamboo, and KC1-added bamboo salts used increased the antimutagenic activities against MNNG, however, the sample treated with refined salt reduced the antimutagenic activity. Inhibitory effects of the salted-mackerels on the growth of human cancer cells were increased as dose dependent pattern. Mackerel salted with refined salt activated the growth of AGS human gastric adenocarcinoma cells, but mackerel salted with sun-dried, bamboo, and KC1-added bamboo salts kept or increased anticancer effect compared to the raw mackerel. Mackerel salted with KC1-added bamboo salt led to the highest antimutagenic and anticancer activities. These results suggest that antimutagenic and anticancer effects of mackerel during manufacturing of the salted-mackerel could be enhanced by using different kind of salts such as bamboo, or KC1-added bamboo salts.

• 한국의류학회지
• /
• 제35권2호
• /
• pp.206-217
• /
• 2011

The dyeing properties of cotton fabrics with bamboo colorants were studied by investigating the analysis of bamboo colorants, the effect of dyeing conditions (dye concentrations, dyeing temperatures and times on dye uptakes), effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use; in addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were also estimated. In the UV-Visible spectrum, the wavelength of the maximum absorption for bamboo stems and leaves extracts was found to be 280nm and 295nm, respectively; in addition, bamboo colorants produced a yellow color. From the FT-IR and GC-MS results, it was assumed that the chromophoric substance from bamboo extracts was composed of flavones substances with tricin. An increased dyeing concentration resulted in a larger dye uptake and a Freundlich absorption isotherm was obtained. A larger dye uptake occurred as the dyeing time and temperature increased. The post-mordanting was more effective than pre-mordanting. Mordants, Fe and N.Fe, were effective for an increased dye uptake. The color of fabrics mordanted with Cu and N.Cu changed to GY. Regardless of mordanting, the colorfastness on the washing of dyed fabrics showed a low rating compared to other fastness. Mordanting adversely affected the lightfastness of dyed fabric. The dyed fabric showed very good antimicrobial abilities of 99.9%. In addition, the ultraviolet-cut ability and deodorant ability improved in cotton fabric dyed with bamboo extracts.

• 한국식품위생안전성학회지
• /
• 제15권1호
• /
• pp.55-59
• /
• 2000

Bamboo oil의 천연 보존료로서의 가치를 평가하기 위해 합성 보존료인 BHA와 이미 수입되어 사용되고 있는 천연보존료인 tea tree oil을 비교하기 위하여 disc diffusion법과 broth dilution 법으로 S. aureus와 E. coli대한 항균력을 검토한 결과를 요약하면 다음과 같다. 1. Disc diffusion법으로 S. aureus에 대한 항균력을 조사한 결과 BHA>tea tree oil>bamboo oil 순이었고 E. coli에 대한 항균력은 bamboo oil이 가장 강하게 나타났으며 다음은 BHA>tea tree oil순으로 나타났다. 2. Broth dilution법으로 S. aureus와 E. coli모든 시료 6.0$\mu$l/ ml 이상에서 모두 측정되지 않아 모든 시료에서 동일하게 최소억제농도가 6.0$\mu$l/ ml 이상 필요한 것으로 나타났다. 3. Bamboo oil의 이용 개발 시 경제적 조건은 동일한 항균력을 기대할 때 tea tree oil에 비하여 약 20%정도 저렴하여 경제성이 충분히 있는 것으로 나타났다.

• 한국식품저장유통학회지
• /
• 제22권3호
• /
• pp.322-327
• /
• 2015

죽순분말을 첨가한 전병을 제조하여 첨가 수준별 품질특성을 조사하였다. 죽순분말 첨가 전병의 일반성분 중 조단백질, 식이섬유와 회분의 경우 죽순 분말 첨가량이 증가할수록 높아지는 경향을 보였고 조지방은 감소하였다. 유리아미노산 함량의 경우 죽순분말을 첨가할수록 증가하는 결과를 보였다. 색도에서 명도를 나타내는 L값은 죽순 분말 첨가량이 높아지면서 증가하였고, 무첨가구 시료와 타 시료간의 색차값을 비교한 ${\Delta}E$ 값의 변화는 죽순 분말 100 g 첨가구가 4.58로 나타나 죽순 분말 첨가가 전병 고유의 색에 영향을 주는 것으로 나타났다. 유리당 함량은 죽순 분말을 첨가하면서 다소 감소하는 것으로 나타났다. 관능에 따른 시료별 선호도 결과 죽순 300 g 첨가 시료가 색(color), 향미(flavor), 맛(taste), 식감(chewiness) 모두 가장 높은 값을 나타냈다. 전반적 기호도와 다양한 관능검사 결과를 종합하여 볼 때 전병에 첨가하는 죽순분말의 적정비율은 300 g 수준이 가장 좋은 것으로 나타났다.

• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.153-160
• /
• 2021

In this study, composite materials were prepared by varying the content of glass fiber and bamboo fiber in PP/glass fiber/bamboo fiber. Experiments were conducted to confirm the mechanical properties(tensile, impact and burst strength) and volatile organic compound content of the bamboo fiber composite prepared under these conditions. An improvement in the main properties was observed at a fiber content of 30wt%. When the fiber fraction was increased above 30wt%, the mechanical properties tended to decrease due to the agglomeration of fibers at higher load fractions. In addition, the content of volatile organic compounds increased as the content of bamboo fibers increased, which is thought to be due to the volatile organic compounds generated during the manufacturing process of the composite material being present in the composite material without escaping from the pores of the bamboo fibers and volatilizing at a certain temperature. As a result of confirming the physical properties of the composite, it is considered that the optimal mixing condition is 30wt% of bamboo fiber for the composite produced by varying the amount of bamboo fiber composite. In the future, it is thought that follow-up experiments to confirm and improve the pre-treatment conditions for reducing the content of volatile organic compounds in the manufactured composite material are possible.

• Journal of the Korean Wood Science and Technology
• /
• 제50권2호
• /
• pp.134-147
• /
• 2022

The objective of this study is to determine the effect of fiber direction arrangement and layer composition of hybrid bamboo laminate boards on the physical and mechanical properties. The raw material used was tali bamboo (Gigantochloa apus (J.A. & J.H. Schultes) Kurs) rope in the form of flat sheets (zephyr) and falcata veneer (Paraserianthes falcataria (L) Nielsen). Zephyr bamboo was arranged in three layers using water-based isocyanate polymer (WBPI) with a glue spread rate of 300 g/m². There were variations in the substitution of the core layer with falcata veneers (hybrid) as much as two layers and using a glue spread rate of 170 g/m². The laminated bamboo board was cold-pressed at a pressure of 22.2 kgf/cm² for 1 h, and the physical and mechanical properties were evaluated. The results showed that the arrangement of the fiber direction significantly affected the dimensional stability, modulus of rupture, modulus of elasticity, shear strength, and screw withdrawal strength. However, the composition of the layers had no significant effect on the physical and mechanical properties. The bonding quality of bamboo laminate boards with WBPI was considered to be quite good, as shown by the absence of delamination in all test samples. The bamboo hybrid laminate board can be an alternative based on the physical and mechanical properties that can meet laminated board standards.

• Journal of the Korean Wood Science and Technology
• /
• 제52권1호
• /
• pp.1-12
• /
• 2024

Betung bamboo (Dendrocalamus asper) is used as a building and handicraft material in Indonesia; however, bamboo needs to be dried to increase its stability. This study aimed to evaluate the efficiency of drying bamboo using solar energy and different drying oven designs. The betung bamboo pieces were dried using a direct solar dryer (direct drying) and an indirect solar dryer (indirect drying) and then the decrease in levels that occurred based on the relative humidity (RH) and temperature values achieved in the two dryers were compared. The highest average temperature in the direct indirect drying oven compartment was 60.1 ± 13.1℃ with 19.9 ± 16.4% RH and 60.2 ± 11.9℃ with 19.5 ± 15.5% RH, respectively. The drying defect in indirect drying was lower than that in direct drying, and indirect drying had a 61.7% greater average water loss than direct drying with significant difference (95%, analysis of variance) based on water loss/compartment volume parameters. Thus, the solar drying oven can be used to air-dry bamboo (14%) for 7 d from an initial moisture content of 70%-80% in bamboo strips. The results of this research can be used for small-scale bamboo processing industries that have limited use of electrical energy with quite good results.

• Preventive Nutrition and Food Science
• /
• 제1권2호
• /
• pp.159-167
• /
• 1996

Effect of covering various levels(0, 1, 3, 5 and 7% per Chinese radish weight) of bamboo(Pseudosasa japonica Makino) leaves on the surface of Dongchimi was studied in the course of fermenting at 1$0^{\circ}C$ up to 75 days. Physicochemical, microbiogical, and sensory characteristics of Dongchimi were analyzed at regular intervals of 5 to 7 days during fermentation. Both the degree of pH drop from the initial 6.47~6.54and increase total acid content from the initial 0.004%, with the accumulation of organic acids tended to be more gradual depending upon the amounts of bamboo leaves covered. The increases of total solid content and turbidity were also suppressed in similar patterns, notably after 13 days of fermentation. The growth of total bacteria(1.5$\times$10$^4$cfu/ml, initial)was partly inhibited while that of lactic acid bacteria(1.8$\times$10$^4$cfu/ml, initial)was favorably encouraged by the presence of bamboo leaves. As a result of sensory evaluation, Dong-chimi covered with 1 and 3% bamboo leaves on showed the higher scores significantly(p<0.05, p<0.01, p<0.001) in overall acceptability till 39 days. But after 61 days, those covered with 3 and 5% bamboo leaves were rather preferable than any other one.

• 한국산림과학회지
• /
• 제2권1호
• /
• pp.10-16
• /
• 1962

The following are what this auther concluded in his recent research of bamboo cultivation. 1. The bamboo logging should be prohibited during the months of July and August, for during that season the growth of the terrestrial stem is most vigorous and active. 2. The growth of terrestrial stem of the phyllotachys pubescens is not likely to be affected the soil texture on which it grows and it is sappling sprout out well enough in any kind of soil, but it was found out that it grows in the best condition on the sand-clay soil and in next best condition on the clay-soil. 3. The bamboo blossoming takes always most of the nutritions needed for the growth of the terrestrial stem and causes to decay 90 percent of the next year buds which await in the terrestrial stem to sprout as the sappling. The remaining 10 percent of the buds is to be the "re-incarnated bamboos" 4. The terrestrial thin roots of blossoming bamboo are negative in their growth, too weak in absorbing the nutrition. The above stated facts show, to be brief, that growth of bamboo depends largely upon that of the terrestrial stem.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.245-252
• /
• 2020

This study was performed to analyze the mechanical properties of tropical hybrid cross-laminated timber (CLT) with bamboo laminated board as the core layer in order to evaluate the possibility of its use as a CLT material. Bamboo board was used as the core layer and the tropical species Acacia mangium willd., from Indonesia, was used as the lamination in the outer layer. The modulus of elasticity (MOE), modulus of rupture (MOR), and shear strength of the hybrid CLT were measured according to APA PRG 320-2018 Standard for Performance-Rated Cross-Laminated Timber. The results show that the bending MOE of the hybrid CLT was found to be 2.76 times higher than SPF (Spruce Pine Fir) CLT. The reason why the high MOE value was shown in bamboo board and hybrid CLT applied bamboo board is because of high elasticity of bamboo fiber. However, the shear strength of the hybrid CLT was 0.8 times lower than shear strength of SPF CLT.