• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.784-789
• /
• 2018

Accurate aerodynamic characterization of projectile is crucial for successful development of munition. The aerodynamic characterization of fin stabilized projectile is more difficult than characterization of traditional symmetric ballistic projectile. Instrumented free flight experiments were conducted to quantify rolling behavior of fin stabilized projectile. The instrumented projectiles were launched from a rifled tube and the onboard sensor data were acquired through a telemetry transmitter. Roll rate was measured for fin stabilized projectile by means of an angular rate sensor. And, roll damping coefficients were estimated from onboard sensor data acquired during gun firing and trajectory analysis of mathematical model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.393-400
• /
• 2022

The Divert and Attitude Control System(DACS) used in high-altitude engagements is expensive and complex. In this paper, we design a high-altitude terminal guidance and control loop of guided-missile equipped with a Thrust Vector Control(TVC) that is less expensive and simpler than DACS. The proposed system utilizes a quaternion feedback control technique to track the thrust attitude command converted from the acceleration command of true proportional navigation guidance. The performance analysis of the proposed terminal guidance and control loop is conducted through engagement simulations against ballistic targets at a high altitude.

• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.31-39
• /
• 2017

This paper analyses the effectiveness of Kill Chain (KC) and Korea Air and Missile Defense (KAMD), also known as the K2 systems, using monte carlo simulation. It is assumed that the K2 systems are consisted with unitary KC and multi-layered (upper-tier and lower-tier) KAMD. And each system has two or three arbitrary weapon systems and its combination makes 12 scenarios. Measures of effectiveness (MOE) of the K2 systems were defined as ratio of eliminated ballistic missiles from total threats. And total cost was calculated by number of weapon launched and its unit cost. MOE and total cost of the K2 systems were estimated using monte carlo simulation with a thousand iteration for each scenario. Cost-effectiveness analysis was performed and the best candidate was selected using fixed effectiveness approach. As a result, the performances of KC are prime factor that affects both effectiveness and total cost of the K2 systems. It is also, acquired proper level of lower-tier KAMD to achieve desired defense effectiveness. For future work, it needs to be performed cost-effectiveness analysis based on practical specification and life cycle cost of weapon systems.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.579-588
• /
• 2018

Purpose : To analyze the eyeglasses supply system for ametropic soldiers in ROK military. Methods : We investigated and analyzed the supply system of eyeglasses for the ametropic soldiers provided by the Korean military. The refractive powers and corrected visual acuity were measured for 37 ametropic soldiers who wear insert glasses for ballistic protective and gas-masks supplied by the military based on their habitual prescriptions. Full correction of refractive error was prescribed for subjects having less than 1.0 of distance visual acuity, and comparison was held for inspecting the changes in corrected visual acuity. Suggestions were provided for solving the issues regarding current supplying system, and this study investigated the applicabilities for utilizing professional optometric manpower. Results : The new glasses supplied by army for ametropic soldiers were duplicated from the glasses they worn when entering the army. The spherical equivalent refractive powers of the conventional, ballistic protective and gas-mask insert glasses supplied for 37 ametropic soldiers were $-3.47{\pm}1.69D$, $-3.52{\pm}1.66D$ and $-3.55{\pm}1.63D$, respectively, and the spherical equivalent refractive power of full corrected glasses was $-3.79{\pm}1.66D$, which showed a significant difference(p<0.05). The distant corrected visual acuity measured at high and low contrast(logMAR) of conventional, ballistic protective and gas-mask insert glasses were $0.06{\pm}0.80$, $0.21{\pm}0.82$, $0.15{\pm}0.74$, $0.34{\pm}0.89$, $0.10{\pm}0.70$ and $0.22{\pm}0.27$, respectively, while the corrected visual acuity by full corrected glasses were increased to $0.02{\pm}1.05$, $0.10{\pm}0.07$, $0.09{\pm}0.92$, $0.26{\pm}0.10$, $0.04{\pm}1.00$ and $0.19{\pm}1.00$, respectively. There was a significant difference(p<0.05) except for the case of the low contrast corrected visual acuity of the conventional and gas-mask insert glasses. The procedure for ordering, dispensing, and supplying military glasses consists of 5 steps, and it was found that approximately two weeks or more are required to supply from the initial examination. Conclusion : The procedure of supplying the military glasses showed three issues: 1) a lack of refraction for prescription system, 2) relatively long length of time required for supplying the glasses, 3) an inaccurate power of supplied glasses. In order to solve those issues, in the short term, education is necessarily required for soldiers on the measurement of the refractive powers, and in the near future, further standard procedures for prescription of glasses as well as the securement of optometric manpower are expected.

• STI Policy Review
• /
• v.2 no.3
• /
• pp.1-12
• /
• 2011

North Korea is now under the pressure of international sanctions due to its nuclear tests, firing of long-range ballistic missiles, the sinking of the ROK naval frigate the Cheonan, and the artillery attack on Yeonpyeong Island that killed four people. To overcome the burden of sanctions North Korea has exerted various efforts to reconstruct its industries. However, it is very unlikely that these reconstruction efforts would produce significant results due to the structural problems of the antiquated infrastructure of North Korean industries. In the future, it is expected that South Korea will have to cooperate with North Korea for the reconstruction of the North Korean economy after the North Korean nuclear issue will be peacefully resolved. South Korean government has to prepare for the reconstruction with careful planning based on analysis of North Korean industries. But, the number of previous studies that have analyzed the technological level of North Korean industries are quite limited. In preparation for the future inter-Korean industrial cooperation, this study tries to analyze the technological level of North Korean industries. The steel industry has been selected as the focus for the main analysis of this study due to the importance of the steel industry as one of key infrastructure industries. Additionally, this study tests the sustainability of the North Korean steel industry by looking into the possibility of whether the North Korean steel industry can sustain or grow while maintaining global competitiveness in the future when the market opens to the world. Such analysis is expected to contribute to the joint prosperity of two Koreas in the short term and the reduction of unification costs in long term.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.300-307
• /
• 2020

This study examines the reliability evaluation concept and procedure of bulletproof materials (BRP: Bulletproof Reliability Program). ASRP, RAM analysis tasks were utilized for the study. Based on this analysis, the concept, method, performance system, and procedure of BRP were examined. The BRP task execution procedure consists of the following four steps. First, the business (evaluation) planning stage establishes the evaluation plan every year. Second, there is a testing stage that performs the general inspection, functional test, and operational test according to the established plan. Thirdly, there is an evaluation/analysis phase to synthesize/analyze the results and to judge the appropriate grade considering the performance of bulletproof materials. Finally, the follow-up step of each group according to the result. The following criteria are suggested for BRP implementation: BRP testing capability, development of BRP evaluation method, and recognition of the importance of BRP business.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.80-89
• /
• 2013

The amount of object which reenter the Earth's atmosphere has been increasing after the Sputnik I launch in October 1957. Most of reentry objects were incinerated by aerodynamic heating so they hardly survive. But they may incur casualties and widespread property damages if they survive and fall to surface. The amount of reentry objects, such as Satellite, Rocket Booster, Pressure Tank, ISS shows continued growth as byproduct of space activities. Most of the re-entry objects are incinerated at between altitude of 50km~80km and 10%~40% of the objects are surviving and falling to the ground. Therefore, this paper try to piece together the reentry event and analysis the survival characteristics of re-entry object.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.5
• /
• pp.71-77
• /
• 2015

Internal ballistics is a phenomenon happened in tens of milliseconds during the gun firing. The configuration variables of the solid propellant are important factors which have influences on the performance of the gun system. In this study, the performance analysis of the 7-perforated propellant has been conducted using the numerical program for the interior ballistics. The effect of the configuration variables on the gun system performance has been analyzed. The propellant design has been conducted for the satisfaction of the performance requirements. As results, the relationship between the configuration variables and the performance has been obtained and the basic design concept of the multi-perforated propellant has been provided.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.4
• /
• pp.324-331
• /
• 2014

In the design of a combat vehicle, various performances such as firepower, mobility and survivability, etc., should be considered. Furthermore, since these performances relate to each other, design framework which can treat an integrated system should be employed to design the combat vehicle. In this paper, we use empirical interior ballistic and 3D combat vehicle analyses for predicting firepower and mobility performances which are developed in previous study (1) integrated performance modeling. In firepower performance, pitch and roll angle by sequential firing are considered. In mobility performance, vertical acceleration after passing through a bump is regarded. However, since there are many design variables such as mass of vehicle, mass of suspension, spring and damping coefficient of suspension and tire, geometric variables of vehicle, etc., for firepower and mobility performance, we utilize analysis of variance and quality function deployment to reduce the number of design variables. Finally, integrated design optimization is carried out for integrated performance such as firepower and mobility.

• Composites Research
• /
• v.23 no.6
• /
• pp.14-18
• /
• 2010

Among the factors that threaten spacecraft, Micrometeoroid and Orbital Space Debris(MMOD) cause damage to spacecraft and impact velocity is about 8~70km/s. Nowadays, various Whipple Shield are studied and applied to protect spacecraft. As the materials used to Shielding System, aluminum is usually used but composite is also used increasingly. So this study compared characteristics of hypervelocity impact of Aluminum and composites through finite element analysis. The Projectile was a spherical shape using Aluminum 2017-T4, and aluminum plate was using Aluminum 6061-T6, CFRP plate was using T300/5208. Initial impact velocity of projectile was 1km/s. As a result, kinematic energy of projectile decreased to about 64J and about 63J for aluminum plate and CFRP plate, respectively after impact. Although both results is almost same about the absorption of impact energy, you can think the CFRP has good ballistic characteristic, because CFRP is lighter about 1.7 times compared with density of aluminum.