• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2004

This paper deals with a balanced model reduction for T-S(Takagi-Sugeno) fuzzy systems with time varying state delay. We define a generalized controllability gramian and a generalized observability gramian for a stable T-S fuzzy delayed systems. We obtain a balanced state space realization using the generalized controllability and observability gramian and obtain a reduced model by truncating states from the balanced state space realization. We also present an upper bound of the approximation error. The generalized controllability gramian and observability gramian can be computed from solutions of linear matrix inequalities. We demonstrate the efficacy of the suggested method by illustrating a numerical example.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.75.1-75
• /
• 2002

Several model order reduction methods for large RLC circuits have been developed in the last few years. Krylop subspace based methods are extremely effective for generating the low order models of large system but there is no optimal theory for the resulting models. Alternatively, methods based truncated balanced realization have an optimality property but are too computationally expensive to use on complicated problems such as large RLC circuits. In this paper, we present a method for improving time domain response of reduced order RLC circuits. The method used here is based on combing Krylop subspace based method and truncated balanced realization method plus residualization. The metho...

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.2
• /
• pp.29-36
• /
• 2004

This paper deals with a fractional model reduction for linear systems with time varying delayed states. A contractive coprime factorization of linear time delayed systems is defined and obtained by solving linear matrix inequalities. Using generalize controllability and observability gramians of tile contractive coprime factor, a balanced state space realization of the system is derived. The reduced model will be obtained by truncating states in the balanced realization and an upper bound of model approximation error is also presented. In order to demonstrate efficacy of the suggested method, a numerical example is illustrated.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.68-74
• /
• 1998

This paper deals with a model reduction problem for the linear systems with state delay. After defining the controllability/observability Gramians, the concept of a balanced model for the linear systems with state delay is introduced. Based on solutions of linear matrix inequalities, the model reduction method with guaranteed error bounds is developed. In order to demonstrate the efficacy of teh suggested method, a numerical example is also performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1219-1219
• /
• 1991

This paper proposes the model order reduction with pass band error reduction in the frequency domain of discrete time linear systems. The algorithm is the new method of reduced order model which reduces passband error by changing controllability and observability gramian used with weighted functions. A numerical example shows that this algorithm has lower passband error than balanced w&l and weighted function characteristics in frequency domain.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1018-1023
• /
• 1992

In this paper we proposed the systematic method of reducing the order of controller with robustness. State space formulae for all controllers is found by solving two coupled J-lossless coprime factorizations and model reduction problem. To reduce the order of controller, balanced truncation and Hankel approximation are used.

• Structural Engineering and Mechanics
• /
• v.78 no.3
• /
• pp.305-317
• /
• 2021

An AMD control system is usually built based on the original model of a target building. As a result, the fact leads a large calculation workload exists. Therefore, the orders of a structural model should be reduced appropriately. Among various model-reduction methods, a suitable reduced-order model is important to high-rise buildings. Meanwhile, a partial structural information is discarded directly in the model-reduction process, which leads to the accuracy reduction of its controller design. In this paper, an optimal technique is selected through comparing several common model-reduction methods. Then, considering the dynamic characteristics of a high-rise building, an improved balanced truncation (BT) method is proposed for establishing its reduced-order model. The abandoned structural information, including natural frequencies, damping ratios and modal information of the original model, is reconsidered. Based on the improved reduced-order model, a new reduced-order controller is designed by a regional pole-placement method. A high-rise building with an AMD system is regarded as an example, in which the energy distribution, the control effects and the control parameters are used as the indexes to analyze the performance of the improved reduced-order controller. To verify its effectiveness, the proposed methodology is also applied to a four-storey experimental frame. The results demonstrate that the new controller has a stable control performance and a relatively short calculation time, which provides good potential for structural vibration control of high-rise buildings.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3962-3969
• /
• 1975

1. When the frame of the experimental apparatus was directly fixed on the platform, result from the spectrum density analysis showed that the generated vibration frequecy of the system was nearly-same as the system's own characteristic vibration frequency, 80Hz, in the case of the forcing vibration frequency was 7.5 to 22.5Hz. The reduction ratio of acceleration by balanced type model compare to non-balanced type one was 26.66 percent. 2. When the frame of experimental apparatus was fixed on the platform with putting a shock absorbing rubber between the frame and the platform, the generated vibration frequency of the system was same as forcing vibration frequency. When either frequency or the amplitude of the forcing vibration was increased, the acceleration ratio was increased too. The average reduction ratio was resulted 44.77 per cent. It was concluded that this method of acceleration measurement(the method using a shock absorbing rubber) was a reaonable method, because actual machine will work under such condition. As the vibration frequency and aptitude were increased, the absolute magnitude of acceleration was increased. 3. unbalanced rotating parts, and unbalanced moment of inertia of links were supposed to be causing factors of residual vibration in spite of using the balanced type oscillating mole drainer. This fact suggested that the attachment of the counter weight on the rotating parts which satisfy the condition mw$.$rw=m0e, was necessary. And also, it was expected that the shock absorbing effect could be improved by putting the shock absorbing materials between the moving parts and their supports.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.11-19
• /
• 1992

This paper proposes a reduced order method which reduces passband error by changing controllability and observability gramian based on weighted functions in the linear time invariant system. In the case that the 4-order model is the reduced to 3-order model in the low-pass filter, the QEI in the proposed method is improved to 6.15724 compared to 10.16464 in the balanced realization method and the sensitivity is improved to 5.45962 compared to 7.790568. The frequency property curves show that the proposed method is superior to the balanced realization method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.988-992
• /
• 2007

Recently, dynamic system has been enlarged and is exposed to various types of disturbance. Thus designing controller for those dynamic system under random disturbance is not practically easy. As a result, the exact analysis for the system which is exposed to various irregular disturbance is quite important. In order to perform analysis, conventional BMR(Balanced Model Reduction) method is applied to moment equation in stochastic domain and reliable reduced order system model has been obtained.