• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.95-98
• /
• 1996

Universal Learning Network(U.L.N.), which can model and control the large scale complicated systems naturally, consists of nonlinearly operated nodes and multi-branches that may have arbitrary time delays including zero or minus ones. Therefore, U.L.N. can be applied to many kinds of systems which are difficult to be expressed by ordinary first order difference equations with one sampling time delay. It has been already reported that learning algorithm of parameter variables in U.L.N. by forward and backward propagation is useful for modeling, managing and controlling of the large scale complicated systems such as industrial plants, economic, social and life phenomena. But, in the previous learning algorithm of U.L.N., time delays between the nodes were fixed, in other words, criterion function of U.L.N. was improved by adjusting only parameter variables. In this paper, a new learning algorithm is proposed, where not only parameter variables but also time delays between the nodes can be adjusted. Because time delays are integral numbers, adjustment of time delays can be carried out by a kind of random search procedure which executes intensified and diversified search in a single framework.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.330-336
• /
• 2009

This paper studies on the new control algorithm for the mass-flow stabilization in strip head part of a hot strip mill. A new strip tension model in the strip head part is derived using the current deviation of two neighboring stands. The current deviation means a difference between a measured current and a lock-on current, where the lock-on current is set up when a strip tension or a looper angle reaches each target value or time is about 0.4sec, respectively. On the basis of the tension calculation model, a mill velocity of a backward stand is controlled to stabilize a strip mass-flow by PI control algorithm. Therefore, the mass-flow control for strip head part is executed from a metal-in time into a foreward stand till the looper works normally. It is known by the results of a computer simulation and an experiment that the proposed control algorithm is very effective in stabilizing the mass flow of the strip head part.

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.197-207
• /
• 1990

This comparative study was undertaken to investigate the position of the hyoid bone in unilateral cleft lip and palate individuals. The materials for this study consisted of 35 subjects with surgically repaired unilateral cleft lip and palate (25 males, 10 females) and 40 subjects with normal facial morphology (20 males, 20 females). Cephalometric measurements of unilateral cleft and palate individuals were compared with those of non-cleft individuals. The conclusions of this study were obtained as follows: 1. To the anterior cranial base, the hyoid bone in unilateral cleft lip and palate individuals was located downward as compared with non-cleft individuals. 2. To the mandible, the hyoid bone in unilateral cleft lip and palate individuals was located backward as compared with non-cleft individuals. 3. The distance between the dorsum of the tongue and the inferior border of the hard palate in unilateral cleft lip and palate individuals was longer than that in non-cleft individuals. 4. Unilateral cleft lip and palate individuals showed no significant difference in the distance between the hyoid bone and the dorum of the tongue as compared with non-cleft individuals.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1122-1127
• /
• 2004

an isolated droplet combustion exposed to pressure perturbations in stagnant gaseous environment is numerically conducted. Governing equations are solved for flow parameters at gas and liquid phases separately and thermodynamic parameters at the interfacial boundary are matched for problem closure. For high-pressure effects, vapor-liquid interfacial thermodynamics is rigorously treated. A series of parametric calculations in terms of mean pressure level and wave frequencies are carried out employing a n-pentane droplet in stagnant gaseous air. Results show that the operating pressure and driving frequency have an important role in determining the amplitude and phase lag of a combustion response. Mass evaporation rate responding to pressure waves is amplified with increase in pressure due to substantial reduction in latent heat of vaporization. Phase difference between pressure and evaporation rate decreases due to the reduced thermal inertia at high pressure. In addition to this, augmentation of perturbation frequency also enhances amplification of vaporization rate because the time period for the pressure oscillation is much smaller than the liquid thermal inertia time. The phase of evaporation rate shifts backward due to the elevated thermal inertia at high acoustic frequency.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.2
• /
• pp.85-105
• /
• 1994

As an exploratory attempt, this study examined the correlates of different strategic groups in the Korean health food industry. Many prior studies believe that different entry mode such as entry timing and patterns, and different cognitive structure of top managers lead to the formation of different strategic groups in the same industry. Different strategic groups with different sources or mobility barriers are also expected to produce different level of economic performance. Multivariate statistical analyses of data from 32 firms in the Korean health food industry revealed the following results. i) There are four different strategic groups with different levels of mobility barriers in terms of firm size, scope of product/market domain, degree of forward and backward integration. ii) Differences in both entry timing and environmental perception of top managers are associated with different stratetic groups. However, the patterns of entry are not significantly different among four strategic groups. iii) Four strategic groups exhibit different level of economic performance in terms of sales growth rate and return on investment. Finally, this study tried to identify commonalities and differences among various strategic groups found in several industries in Korea. The results offered some implications to search for developing a useful theory of strategic groups in Korea.

• Industrial Engineering and Management Systems
• /
• v.8 no.3
• /
• pp.171-180
• /
• 2009

Population learning algorithm (PLA) is a population-based method that was inspired by the similarities to the phenomenon of social education process in which a diminishing number of individuals enter an increasing number of learning stages. The study aims to develop a framework that repeatedly applying the PLA to solve the discrete resource constrained project scheduling problem with two objectives: minimizing project makespan and renewable resource availability, which are two most common concerns of management when a project is being executed. The PLA looping framework will provide a number of near Pareto optimal schedules for the management to make a choice. Different improvement schemes and learning procedures are applied at different stages of the process. The process gradually becomes more and more sophisticated and time consuming as there are less and less individuals to be taught. An experiment with ProGen generated instances was conducted, and the results demonstrated that the looping framework using PLA outperforms those using genetic local search, particle swarm optimization with local search, scatter search, as well as biased sampling multi-pass algorithm, in terms of several performance measures of proximity. However, the diversity using spread metric does not reveal any significant difference between these five looping algorithms.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.83-89
• /
• 1994

It is important for an ultrasonic testing to know the sound pressure field and the directivity of ultrasonic waves propagating in a solid. The directivity of ultrasonic wave is closely related to the sensitivity, the scanning pitch, the arrangement of angle probe, and the defect kind in ultrasonic testing. This paper describes on the directivity measurement of ultrasonic wave using ultrasonic wave visualization method. The directivity of the shear wave emitted from the angle probes were constant during propagation. The difference of directivity was existed between 2MHz and 4MHz angle probes. The centers of directivity were located backward from the incident poing and inside of the angle probe and were not changed during the wave propagation.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.4
• /
• pp.791-812
• /
• 2011

This is a survey on American options. An American option allows its owner the privilege of early exercise, whereas a European option can be exercised only at expiration. Because of this early exercise privilege American option pricing involves an optimal stopping problem; the price of an American option is given as a free boundary value problem associated with a Black-Scholes type partial differential equation. Up until now there is no simple closed-form solution to the problem, but there have been a variety of approaches which contribute to the understanding of the properties of the price and the early exercise boundary. These approaches typically provide numerical or approximate analytic methods to find the price and the boundary. Topics included in this survey are early approaches(trees, finite difference schemes, and quasi-analytic methods), an analytic method of lines and randomization, a homotopy method, analytic approximation of early exercise boundaries, Monte Carlo methods, and relatively recent topics such as model uncertainty, backward stochastic differential equations, and real options. We also provide open problems whose answers are expected to contribute to American option pricing.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.7
• /
• pp.997-1004
• /
• 2001

Burner of Flat Flame type expects the uniform flame distribution and NOx reduction. The characteristics of Flat Flame Burner become different according to swirl number in the burner throat. Experiments were focused on swirl effect by four types of swirler with different swirl numbers (0, 0.26, 0.6 and 1.24). It shows many different flow patterns according to swirl number using PIV(Particle Image Velocimetry) method. The flow of burner with swirler is recirculated by pressure difference between its center and outside. Recirculated air makes stable in flame, and reduced pollutant gas. In case of swirl number 0, main flow passes through axial direction. As swirl number increased, The backward flow develops in the center part of burner and Flow gas recirculates. This is caused by radial flow momentum becomes larger than axial flow by swirled air and the pressure at center drops against surrounding. As swirl number increases, the radial and axial velocity was confirmed to be larger than low swirl numbers. And turbulence intensity have similar pattern. The CTRZ(Central Toroidal Recirculation Zone) is shown evidently when y/D=1 and S=1.24. The boundary-layer between main flow and recirculated flow is shown that the width is seen to be decreased as swirl number increased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.3
• /
• pp.181-188
• /
• 2008

The effect of inclination angle on the heat transfer and pressure drop characteristics of the brazed aluminum heat exchangers is experimentally investigated. Three samples having different fin pitches(1.25, 1.5 and 2.0 mm) were tested. Results show that heat transfer coefficient is not affected by the inclination angle. However, the friction factor increases as the inclination angle increases with negligible difference between the forward and backward inclination. Both the heat transfer coefficient and the friction factor are the smallest at $F_p=1.5mm$, followed by $F_p=2.0mm$ and 1.25mm. Possible explanation is provided considering the louver layout. Comparison with existing correlations is also made.