• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1890-1910
• /
• 2013

Routing overlay offers an ideal methodology to improve the end-to-end communication performance by deriving a backup path for any node pair. This paper focuses on a challenging issue of selecting a proper backup path to bypass the failures on the default path with high probability for any node pair. For existing backup path selection approaches, our trace-driven evaluation results demonstrate that the backup and default paths for any node pair overlap with high probability and hence usually fail simultaneously. Consequently, such approaches fail to derive a robust backup path that can take over in the presence of failure on the default path. In this paper, we propose a three-phase RBPS approach to identify a proper and robust backup path. It utilizes the traceroute probing approach to obtain the fine-grained topology information, and systematically employs the grid quorum system and the Bloom filter to reduce the resulting communication overhead. Two criteria, delay and fault-tolerant ability on average, of the backup path are proposed to evaluate the performance of our RBPS approach. Extensive trace-driven evaluations show that the fault-tolerant ability of the backup path can be improved by about 60%, while the delay gain ratio concentrated at 14% after replacing existing approaches with ours. Consequently, our approach can derive a more robust and available backup path for any node pair than existing approaches. This is more important than finding a backup path with the lowest delay compared to the default path for any node pair.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.431-436
• /
• 2005

In this paper, we design and implement modules for disk backup using the backup devices in SAN clusters. The proposed backup modules provide device management features that manage a number of backup devices and groups backup devices into logical units called pools in SAN clusters. It also supports pre/post script to process additional actions for users during backup and restore processing, and provides life cycle management for backup data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.725-728
• /
• 2011

기존의 디스크 백업 소프트웨어는 디스크 자료의 기록 자체에만 중점을 두고 기록 후 복원에 있어 자료검색에 대한 고려는 하지 않아 기록 후 검색에 불편함이 있다. 본 논문에서는 이러한 불편함을 해소하기 위해 사용자들이 대량의 자료를 쉽게 백업하고 복원에 있어 효율적으로 검색할 수 있는 디스크 백업 시스템을 제안한다. 이 시스템은 사용자가 기록했던 데이터의 명세를 PC 본체 데이터 베이스에 남겨두어 차후에 디스크를 갈아 끼우며 일일이 들여다보지 않고도 바로 검색이 가능하다. 또한 광학 드라이브의 하드웨어적 한계점을 극복하여 여러 번 갈아 끼우는 수고를 덜고 자료를 찾는 시간을 줄일 수 있도록 하였다.

• Journal of The Korean Association of Information Education
• /
• v.3 no.1
• /
• pp.86-93
• /
• 1999

In this paper, we have designed and implemented that PC management system has the function of monitoring and controlling system management MIB defined for PC management using SNMP in PC room. System management MIB consists of monitoring MIB for system and processor information and controlling MIB for backup and restoration. For this, we have added new defined MIB variables to standard MIB and displayed system information, processor information, backup and restoration information of managed PC. And the structure between management system and managed system is shown and process of system information, processor information, backup and restoration of managed PC is illustrated. On real environmental, by monitoring window version, CPU type, system memory and virtual memory and performing backup and restoration of managed PC, actual operation is tested. Management system gathers system information and processor information from managed system and performs backup and restoration for recovering fault of managed system. Hence PC managers can operate and manage many PCs on LAN, efficiently.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.205-214
• /
• 2012

The main thing that IT operation managers consider is protecting assets of corporation from system failure and disaster. Therefore, this research proposed a backup system for a disaster recovery. Previous backup method is that if database update occurs, this record is saved in redo log, and if the size of record file is over than expected, this file is saved in archive log in order. Thus, it is possible to occur errors of data loss from the process of data backup which change in real time while changes of database occur. Suggested backup system is back redo log up to database of transaction log in real time, and back a record that can be omitted from previous backup method up to archive log. When recover the data, it is possible to recover redo log in real time online, and it minimizes data loss. Also, throughout multi thread processing method data recovery is performed and it is designed that system performance is improved. To verify stability of backup system CPN(Coloured Petri Net) is introduced, and each step of backup system is displayed in diagram form, and th e stability is verified based on the definition and theorem of CPN.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.351-360
• /
• 2016

Rapid population growth with high living standards and high electronics use for personal comfort has raised the electricity demand exponentially. To fulfill this elevated demand, conventional energy sources are shifting towards low production cost and long term usable alternative energy sources. Hybrid renewable energy systems (HRES) are becoming popular as stand-alone power systems for providing electricity in remote areas due to advancement in renewable energy technologies and subsequent rise in prices of petroleum products. Wind and solar power are considered feasible replacement to fossil fuels as the prediction of the fuel shortage in the near future, forced all operators involved in energy production to explore this new and clean source of power. Presented paper proposes fuzzy logic based Energy Management System (EMS) for Wind Turbine (WT), Photo Voltaic (PV) and Diesel Generator (DG) hybrid micro-grid configuration. Battery backup system is introduced for worst environmental conditions or high load demands. Dump load along with dump load controller is implemented for over voltage and over speed protection. Fuzzy logic based supervisory control system performs the power flow control between different scenarios such as battery charging, battery backup, dump load activation and DG backup in most intellectual way.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.468-471
• /
• 2012

This paper describes a construction scheme of hot backup or triple modular redundancy control system in a ground hot-firing test facility to carry out performance assessment of propulsion system used in a space launch vehicle. It was possible for a hot backup redundancy control system with manual operated console to simulate TMR control system. A console layout of control system in control center to restrict imprudent works of operators was proposed.

• Korean Management Science Review
• /
• v.11 no.1
• /
• pp.145-163
• /
• 1994

For an Information System to be successful the continual control of the database system(DBS) is very important. In general, such control operations are performed periodically in batches, even in real time systems. We explain DBS related such control operations and describe the decision problem in each of them. Specifically, backup, checkpointing, reorganization, and batch update operations are considered. Then we develop a general model of the batch backup situation to determine the optimal backup timing. Other operations are considered as special cases of the general batch backup operation are derived and compared. We show that, in general, the control limit policy is superior to the fixed time interval policy in terms of the long-run average cost per unit time. Some practical considerations about the implementation of optimal policies are also mentioned.

• The Journal of Information Technology and Database
• /
• v.7 no.1
• /
• pp.17-26
• /
• 2000

To provide highly available services in the distributed object system, it is required to support the object group. The state machine approach and primary-backup approach are proposed as two representative approaches for support of object group. The primary-backup approach does not only give merits such as transparency of object group and non-deterministic execution but also require less resource than state machine approach. This paper describes an extension of CORBA that is required to support of the primary-backup object group. In this paper, the state of backup is synchronized with primary through the atomic multicast protocol whenever the request of client is executed at primary. As a result, it does not require message logging and check pointing. The object group of this paper also provides fast response time in case of failure of the primary since it makes primary election unnecessary. And through an extension of IDL, it makes possible to avoid consistency control depending on characteristic of application. A prototype has been implemented and the performance of object group has been compared with a single object invocation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.43-49
• /
• 2011

A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome this problem clearly, this paper describes an improved backup protection coordination scheme using an IEC 61850-based distance relay for transformer backup protection. IEC 61850-based IED(Intelligent Electronic Device) and the network system based on the kernel 2.6 LINUX are realized to verify the proposed method. And laboratory tests to estimate the communication time show that the proposed coordination method is reliable enough for the improved backup protection scheme.