• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.613-619
• /
• 1998

Ultrasonic probes of 400kHz, 1MHz were fabricated using PZT-5Z plates. Epoxy was used for backing layer materials onthe plates. Nondestructive Test was carried using these probes. Pulse lobe width of impulse response was reduced 15.4% compare 1MHz with 400kHz and 96.6% compare 3MHz with 400kHz. The attenuation in aluminum was 2.05[dB/m] at 400kHz, 4/91[dB/m] at 1MHz, 7.35[dB/m] at 3HMz. Hole detection error of the first hole was 22.4% at 1HMz, 9.% at 3HMz, The second hole 11.6% at 1HMz, 4.7% at 3HMz. In the result of experiment of the hole detection error and resolution, 3HMz probe was the best among them.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.63-66
• /
• 2004

In this study, a hybrid composite journal bearing composed of carbon fiber reinforced phenolic composite liner and metal backing was manufactured to solve the seizure problem of metallic journal bearing materials because the carbon fiber has self-lubricating ability and the phenolic resin has thermal resistance characteristics. To estimate the wear resistance of carbon fiber phenolic composite, wear tests were performed at several pressures and velocities. The oil absorption characteristics, coefficient of thermal expansion, strength and stiffness of the composite were also tested. Using the measured stiffness values, the thermal residual stresses in the composite were calculated to check the reliability of the composite journal bearing.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 학술발표대회 논문집 제19권 2호
• /
• pp.325-328
• /
• 2000

초음파 변환기의 정합을 위해서는 초음파 변환기의 등가회로 구성이 중요하다. 전통적인 등가회로의 경우 비교적 안정적인 등가회로를 예측하게 해 주지만 초음파변환기 구성에서 일어나는 초음파 변환기 외의 구성품 즉 Backing Material, Acoustic Window Material, Radiation Impedance 등에 의한 부가적인 효과를 모델링하는 데는 한계가 있다. 따라서 좀 더 일반적인 방법으로 초음파 변환기를 모델링하는 방법이 필요하다. 그런 방법의 하나로 주파수 영역 측정에 의한 초음파변환기 등가회로 추정법을 제안한다. 이 방법은 초음파 변환기 제작 시 많이 쓰는 임피던스 분석의 결과를 그대로 사용할 수 있고 또 그것이 없어도 일반 함수발생기와 오실로스코프만으로 측정할 수 있어서 랜덤함수를 발생시키고 이에 대한 출력을 저장해야 데이터를 얻을 수 있는 시간영역 추정법에 대해서 장점을 갖는다.

• 자동차안전학회지
• /
• 제7권3호
• /
• pp.19-24
• /
• 2015

Brake pads are a component of disc brake system of automobile and consist of steel backing plates and friction material facing the disk brake rotor. Due to the repeated sliding forces and torque in vehicle braking, friction performance of brake pads are ensured. Futhermore, the brake pad is one of major tuning components in aftermarket, mechanical characteristics of the brake pad are necessary to evaluate for establishing the certification standards of tuning components. This study had performed the five specimen tests for friction coefficients and wear loss rates according to the SAE test specification. Using the instrumented indentation method, yield strength and tensile strength were measured. Friction coefficients, 0.386 - 0.489, and wear loss rates, 1.0% - 3.7% are obtained. The range of yield strength and tensile strength are 21.4 MPa - 105.3 MPa and 39.5 MPa - 176.4 MPa respectively.

• 보건교육건강증진학회지
• /
• 제20권4호
• /
• pp.111-127
• /
• 2003

The government of Korea enacted the National Health Promotion Act in 1995, and set aside funds for national health promotion, endeavoring to reduce the smoking rate of its citizens. Consequently, smoking rates in all age groups of both sexes were lowered during the period of 1999-2003 when legal backing and financial support for no-smoking policies from the national health promotion funds were provided. The decrease in the smoking rate is attributed to the combined effort of the fact that enactment of related acts, their implementation, financial support, and education and publicity 'campaigns on no smoking. However, at the current pace of decreasing the smoking rates, it will be difficult to achieve the Health and Welfare Ministry's smoking rate goal of30％ among adult males by 2013. Thus, related acts should be reshaped, corresponding support should be increased, and financial support should also be provided to implement comprehensive no-smoking policies. Also, budgets should also be alloted to establish a system of providing feedback on the monitoring and evaluation of both short-term and long-term no-smoking business planning and implementation.

• Journal of Biosystems Engineering
• /
• 제32권4호
• /
• pp.269-275
• /
• 2007

In this study, ultrasonic transducers for non-destructive contact measurement of whole fruits were developed. The design parameters for ultrasonic transducer such as acoustical impedance of fruits, kinds of piezoelectric materials, ultrasonic wave frequency, and transducer diameter were investigated. In order to match the acoustical impedance between piezoelectric material and fruit, various materials were fabricated and evaluated. Also to control the sensitivity and bandwidth of the ultrasonic transducer, various backing materials were fabricated and evaluated. Especially, the wear plate of the ultrasonic transducer was designed and fabricated considering the curvature of fruit. The central frequencies of two developed ultrasonic transducers were about 100 kHz and 200 kHz, respectively. With the developed ultrasonic transducers, non-destructive evaluation of the fruit will be possible.

• 한국전기전자재료학회논문지
• /
• 제24권6호
• /
• pp.449-457
• /
• 2011

Effect of pump combinations on the vacuum characteristics of vacuum system was simulated for optimum design of system. In this investigation, the feasibility of modelling mechanism for VacSimMulti simulator was proposed. Simulation results of various pumping combinations showed the possibilities and reliabilities of simulation for the performance of vacuum system in specific semiconductor processing. Simulation of roughing pump presented the expected pumping behaviors based on commercial specifications of employed pumps. Application of booster pump exhibited the high pumping efficiency for middle vacuum range. Combinations of optimum backing pump for diffusion and turbo vacuum system were obtained. And, the predictable characteristics of process application of both simulated systems were also acquired.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권4호
• /
• pp.791-796
• /
• 2001

Friction stir welding is a solid phase welding process that does not melt the metal when welding. The FSW is the most remarkable and potentially useful new welding technique that is still in development. Friction stir butt welding process on 2 mm thick Al 1050 plates by utilizing a milling machine was experimentally studied. With the optimized heat generating tool welds could be achieved that are void and crack free. It was found that the friction stir welded tensile test specimens failed in the HAZ outside of the weld metal, and that the tensile strength was above 90% of that of the base metal.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.119-124
• /
• 2011

Electric night storage heater was introduced and disseminated for power grid balancing and efficient management of power generation facility. But fuel cost for heating has been increased rapidly while the cost of electricity increased slightly. This abnormal rate system caused peak load in winter at last. To solve this problem, application of an air source heat pump was suggested. In the study, the effect of replacing night heater by heat pump and the economics were analysed. In addition the expectation of prospect of heat pump penetration was simulated based on surveyed and investigated data. As a result, fund supporting as well as institutional backing was needed for effective propagation and return of investment.

• 한국광학회지
• /
• 제2권4호
• /
• pp.219-226
• /
• 1991

널리 쓰이는 금속들인 스테인레스강 304, 브라스, 알루미늄, 구리등의 얇은판을 기판에 붙여서, 광흡수를 무시할 수 있은 물질인 plexglass로 만든 광음향셀에 장착한 후 시료에 입사되는 광의 chopping 주파수를 변화시키며 시료에서 발생되는 광음향신호의 크기와 위상을 측정하고 Rosencwaig-Gersho(R-G) 이론에서 발전된 2층(two-layer)모델을 바탕으로한 파라메터 추정(parameter estimation)법을 이용하여 구조적으로 분석하여 열확산도(thermal diffusivity)와 열발산도(thermal effusivity)를 구하였다.