• 한국생활과학회지
• /
• 제17권1호
• /
• pp.115-126
• /
• 2008

The construction of an athlete's tight-fitting garments is very important to the wearer in terms of athletic performance. Therefore pattern development of tight-fitting garments must allow for the full range of human movement and postures. In this study the relationship between the construction of a skate pants pattern and clothing fitting was explored with the aim of improving the comfort of the clothing. The four male subjects were university students between the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on four consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Results showed differences in the front-rise length and back-rise length between basic pants(A) and modified pants(B,C,D) were -5.16cm and +5.64cm. Comparing the basic pants pattern(A) with modified pants pattern(B), the latter was superior to basic pants(A) in terms of pressure sensation and closeness of fit, but there was no significant difference. Among the four tight-fitting skate pants, A and B pants were superior to the others in terms of fitting and stability of waist and hip sections. In the case of the skate pants, the number of cutting lines in the pattern had an influence on clothing comfort. A minimum cutting line for tight skate pants was better than a maximum cutting line in terms of clothing comfort.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1996년도 봄 학술발표회 초록집
• /
• pp.22-22
• /
• 1996

;The Kwinana Shoreline Fumigation Experiment(KSFE) took place in Fremantle, WA, Australia between 23 January and 8 February, 1995. All measurement systems performed to expectation. The CSIRO DAR(Division of Atmospheric Research) LIDAR measured plume sections from near the Kwinana Power Station(KPS) stacks to up to about 5 km downstream. It also measured boundary layer aerosols and the structure of the boundary layer on some occasions. Both stages A and C of KPS were used as tracers at different times. Radiosonde and double theodolite sounding systems measured temperature, humidity, air pressure and wind structure at the coast(Woodman Point) and at the inland(ALCOA residue dump) site at intervals of roughly two hours. These were supplemented by mid afternoon soundings(radiosonde and single theodolite) by Department of Environmental Protection(DEP) at Swanbourne. The Flinders aircraft measured wind, turbulence and temperature structure of the atmospheric boundary layer, concentrations of $C0_2,\;0_3,\;S0_2\;and\;NO_x$ in the smoke plumes and surface radiation over both land and sea. CSIRO DCET(Division of Coal and Energy Technology) vehicle successfully interceptde many smoke plumes and using a range of tracers will be able to identify the various sources much of the time. Routine data from the DEP and Kwinana Industrial Council(KIC) air quality monitoring networks were also automatically logged. Murdoch University measured surface heat flux at Hope Valldy monitoring station and also at Wattleup monitoring station for the last five days. The heart of the LIDAR system is a Neodymium-doped Yttrium-aluminumgarnet(Nd:Y AG) laser operating at a fundamental wavelength of 1064 nm, with harmonics fo 532 nm and 355 nm. A small fraction of the laser beam is scattered back to the LIDAR, collected by a telescope and detedted by a photomultiplier tube. The intensity of the signal as a function of time is a measure of the particle concentration as a function of distance along the line of the laser shot. The results of nine days special field observations are summarized in detail.etail.

• 한국의상디자인학회지
• /
• 제14권1호
• /
• pp.81-96
• /
• 2012

The purpose of this study is to provide fundamental information for standardization of 3D body measurement. This research analyzes errors occurring in the process of extracting body size from 3D body scan data. First, as a result of analyzing basic state of the 3D body scanner's calibration, the point number of each section was almost the same, while the right and left as well as the front and back coordinates of the center of gravity are not, showing unstable data. Nevertheless, the latter does not influence on the size of cylinder such as width and circumference. Next, we analyzed point coordinates variations of scan data on a mannequin nude by life casting. The result was great deflection in case of complicated or horizontal sections including the reference point beyond proper distance from centers of four cameras. In case of the mannequin's size, accuracy proves comparatively high in that measurement errors in height, width, depth, and length dimension occurred all within allowable errors, only except chest depth, while there were a lot of measurement errors in a circumference dimension. Secondly, analysis of accuracy of automatic extraction identification program algorithm presented that a semi-automatic measurement program is better than an automatic measurement program. While both of them ate very acute in parts related to crotch, they are not in armpit related parts. Therefore, in extracting of human body size from 3D scan data, what really matters seems to parts related to armpits.

• 한국항공우주학회지
• /
• 제31권4호
• /
• pp.44-52
• /
• 2003

형상기억합금은 스마트 구조물에서 작동기로 널리 쓰인다. 형상기억합금은 초기변위를 부고 열을 가하게 되면 단위 부피당 큰 회복력과 변위를 발생한다. 형상기억합금의 이론 특성은 인공근육, 작동기, 소음 및 진동감쇠, 형상의 변형 제어 등에 응용될 수 있다. 본 논문에서는 형상기억합금의 3차원 비선형 구성방정식을 이용하여 재료의 거동특성을 해석하고, 형상기억합금이 부착된 스마트구조로 응용될 수 있는 공기 흡입 덕트, 항공기 및 잠수함 동체 등의 구조를 압력이 존재하는 원형 및 복원을 해석하였다. 수치해석결과, 형상기억합금 엑츄에이터가 내압 하에서 작동하자 단면은 변형전의 모습(낮은 응력상태)으로 회복되었다.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제26권1호
• /
• pp.43-58
• /
• 1998

The Kwinana Shoreline Fumigation Experiment (KSFE) took place at Fremantle, WA, Australia between January 23 and February 8, 1995. The CSIRO DAR LIDAR measured plume sections from near the Kwinana Power Station (KPS) stacks to up to about 5 km downstream. It also measured boundary layer aerosols and the structure of the boundary layer on some occasions. Both stages A and C of KPS were used as tracers at different times. The heart of the LIDAR system is a Neodymium-doped Yttrium-aluminum-garnet (Nd:YAG) laser operating at a fundamental wavelength of 1064 nm, with harmonics of 532 nm and 355 nm. For these experiments the third harmonic was used because the UV wavelength at 355 nm is eye safe beyond about 50 m. The laser fires a pulse of light 6 ns in duration (about 1.8 m long) and with an energy (at the third harmonic) of about 70 mJ. This pulse subsequently scattered and absorbed by both air molecules and particles in the atmosphere. A small fraction of the laser beam is scattered back to the LIDAR, collected by a telescope and detected by a photo-multiplier tube. The intensity of the signal as a function of time is a measure of the particle concentration as a function of distance along the line of the laser shot. The smoke plume was clearly identifiable in the scans both before and after fumigation in the thermal internal boundary layer (TIBL). Both power station plumes were detected. Over the 9 days of operation, 1,568 plumes scans (214 series) were performed. Essentially all of these will provide instantaneous plume heights and widths, and there are many periods of continuous operation over several hours when it should be possible to compile hourly average plume statistics as well. The results of four days LIDAR observations of the dispersion of smoke plume in the TIBL at a coastal site are presented for the case of stages A and C.

• 한국전문물리치료학회지
• /
• 제16권2호
• /
• pp.50-58
• /
• 2009

The purpose of this study was to test that motor skill training enhance motor function and cerebellar development. Using an animal model of fetal alcohol syndrome-which equates peak blood alcohol concentrations across developmental period-critifical periods for the effect of alcohol on body and cerebellar weigh was examined. The effect of motor skill training on motor function and cerebellar development of rat exposed alcohol on postnatal days 4 through 10 were studied. Newborn rats were assigned to one of two groups: (1) Control group (CG), via artificial rearing to milk formula and (2) experimental groups (EG), via 4.5g/kg/day of ethanol in a milk solution. After completion of the treatments, the pups were fostered back to lactating dams, and wearing they were raised in standard caged until they were postnatal 48 days. Rats from experimental group of postnatal treatment then spent 10 days in one of two groups: Experimental group II (EGII) was had got motor skill training (training traverse a set of 6 elevated obstacles) for 4 weeks. Experimental group I (EGI) was not trained. Before sacrificing, the rat got examined two behavioral test, body weigh and cerebellar weigh, then coronal sections were processed. The section was investigated the Purkije cell in the cerebellum using light microscope. The results of this study were as follows. 1. In body weight test, the outcome of alcohol groups were significantly lower than the normal group. 2. In cerebellar weight test, the outcome of EGI were significantly lower than CG and EGII. 3. In motor behavioral test, the outcome of EGI was significantly lower than NG and EGII. 4. In Purkinje cells counting test, the outcome of EGI was significantly lower than the NG and EGII. These result suggest that improved motor function induced by motor skill training after postnatal exposure is associated with dynamically altered expression of Purkinje cells and that is related with cerebellar function. Also, these data can potentially serve as a model for therapeutic intervention.

• Safety and Health at Work
• /
• 제6권1호
• /
• pp.56-61
• /
• 2015

Frozen food processing workers work under a cold environment which can cause several adverse health effects.This study explored factors affecting workers' health in the frozen food industry in Thailand. Participants comprised 497 workers exposed to a cold working environment and 255 office workers who served as the controls. Data were collected by a survey on the work environment, and the interview of workers for abnormal symptoms. The exposed group had the following characteristics: 52.7% male, overall average age of 27 (SD 6.6) years old, attained elementary education (Grade 4 and Grade 6) (54.1%), married (48.9%), smokers (21.3%), alcohol consumption (31.0%), duration of work was between 1 and 5 years (65.2%), working 6 days a week (82.7%), 1-5 hours of overtime per week (33.8%), office workers (33.9%); work category: sizing (6.9%), peeling (28.3%) dissecting (22.2%), and in the warehouse (8.6%). The temperature in the work environment ranged from $17.2^{\circ}C$ to $19.2^{\circ}C$ in most sections, $-18.0^{\circ}C$ in the warehouse, and $25^{\circ}C$ in the office areas. Warehouse workers had more abnormal symptoms than controls including repeated pain in the musculoskeletal system (OR 11.9; 95% CI 6.12-23.45), disturbance throughout the body (OR 4.60; 95% CI 2.00-10.56), respiratory symptoms (OR 9.73; 95% CI 3.53-26.80), episodic finger symptoms (OR 13.51; 95% CI 5.17-35.33). The study results suggest that workers' health should be monitored especially with regard to back and muscle pain, respiratory symptoms, episodic finger symptoms, and cardiovascular symptoms. Health promotion campaigns such as antismoking and reduction of alcohol consumption should be established because smoking and alcohol consumption are contributing factors to the pathogenesis of Raynaud's phenomenon and peripheral vascular disorders such as hypertension and heart disease.

• 한국진공학회지
• /
• 제16권6호
• /
• pp.489-495
• /
• 2007

KSTAR 토카막은 현재 주장치 조립을 완료하고 "최초 플라즈마" 발생과 시운전을 준비하고 있다. 이를 위해 설치되어 있는 연료주입계는 배기 덕트 반대 쪽 한 곳만 주입구로 사용하기 때문에 균일하고 신속한 입자공급이 어렵다. 시운전이 끝나고 기본운전 단계가 되면 단순한 플라즈마 생성이 아니라 일정한 고밀도 토카막플라즈마 상태를 일정시간 고르게 유지해야 하므로 공간적으로 균일한 입자공급과 플라즈마 밀도 변화에 따른 신속한 제어가 가능한 연료공급계로 개선되어야 한다. 이런 개선점을 찾는 작업의 일환으로 우선 D-형 진공용기 및 플라즈마 컬럼을 사각단면 토러스로 묘사하는 모델을 만들고 연료공급 위치와 플라즈마의 전리율 및 배기확률에 따라 공간적인 입자분포가 어떻게 바뀌는지 몬테카를로 계산을 통해 분석했다.

• Archives of Plastic Surgery
• /
• 제40권1호
• /
• pp.11-18
• /
• 2013

Background To minimize the inflammatory reaction and improve healing, a new modified dermal substitute composed of an atelocollagen, chondroitin-6-sulfate, and amniotic membrane (AM) was applied to full-thickness skin defects in a pig. Atelocollagen was extracted from bovine skin, and two modified dermal substitutes were generated according to the cross-linking type. Methods The AM-collagen dermal substitutes were characterized and compared with currently used dermal substitutes in a pig skin defect model. There were five experimental groups: dehydrothermal (DHT) cross-linking atelocollagen with the AM on the top (AM-DHT), DHT and chemical cross-linking atelocollagen with the AM on the top (AM-DHT/chemical), Terudermis, Integra, and AlloDerm. After $3{\times}3cm$ full-thickness skin defects on the back of a pig were created, each dermal substitutes dermal substitutes was randomly grafted on the defects. Two weeks after grafting, autologous partial-thickness skin was over-grafted on the neodermis. The take rate of the dermal substitutes, skin, and histological sections were all assessed at 1, 2, and 4 weeks postoperatively. Results More rapid healing and a higher take rate were evident in the AM-DHT and Terudermis groups. Histological examination revealed fewer inflammatory cells and more fibroblast hyperplasia in these two groups. Four weeks after surgery, the amount of newly formed collagen was significantly more appropriate in the AM-DHT group. Conclusions These observations provide supporting evidence that a newly developed amniotic-collagen dermal substitute may inhibit inflammatory reactions and promote wound healing.

• 한국생활과학회지
• /
• 제24권5호
• /
• pp.687-700
• /
• 2015

Lines of non-extension (LoNEs) on torso surface during arm abduction were investigated to provide appropriate location for inserting less-extensible yarns which can be used as seams for design and or clothing pressure variation. As experimental methods, reference points about 3 cm apart were marked on the skin and scanned at 30, $90^{\circ}$ and $135^{\circ}$ arm abduction. Skin deformation was measured by connecting reference points in horizontal, vertical and various angles of diagonal directions. Observation of skin deformation was made within the separated sections of the torso as well as integrated ones to cover the various occasions of design application. LoNEs of front and back torso were provided as mapping lines. Actual compression wear of three types was constructed with different pattern reduction rate at each separated section using LoNEs as boundary cutting lines. Clothing pressure and subjective evaluations of those three compression wear were evaluated by six subjects. LoNEs found in this study were useful as seam lines to differentiate clothing pressure at each part of the body, providing positive wear sensation. It is also expected that LoNEs can be paths for less strechable conductive yarns of IT-integrated upper garments.