• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1091-1097
• /
• 2008

Roll-to-roll based manufacturing plays an important role in producing devices at high speed with lower production cost in printed electronics and publishing industry. Web lateral control is one of the most important factors in improving the quality of product and contributes a considerable point in making devices at micrometer-level accuracy. In recent years, most algorithms proposed for web lateral control base on the Shelton‘s model for designing the feedback control system using the PI controller. Experimental results showed that the existing models do not fully describe the characteristics of the lateral dynamics for some typical operating conditions and so result in poor control algorithms. In this paper, a new lateral control algorithm is proposed for web lateral control system based on back-stepping approach. The outcome of this study proves the reliability throughout simulation results in Matlab/Simulink and comparison with the algorithms based on the existing results.

• Journal of Acupuncture Research
• /
• v.33 no.2
• /
• pp.77-87
• /
• 2016

Objectives : This is a pilot study for a large randomized controlled trial to investigate the efficacy and safety of a newly developed contrast therapy device-- alternating topical heat and cold -- for patients with chronic low back pain. The main objective of this study is to confirm the feasibility of the study design. Methods : The design was a randomized, 2-arm, parallel-group, single-blind, placebo controlled trial. Patients in each group received real or sham contrast therapy in an acupuncture point 10 times over four weeks. The primary outcome measure was pain intensity on a 100-mm visual analogue scale (VAS). The secondary outcomes were back-related dysfunction based on the Oswestry Disability Index (ODI), the Roland-Morris disability questionnaire (RMDQ), and range of motion of lumbar spine based on the modified Schober test (mSchober test), Finger-to-Floor distance (FTF distance), and Finger-to-Thigh distraction (FTT distraction). Results : A total of 30 subjects with chronic low back pain were randomly assigned to a contrast therapy group (n＝15) or a sham group (n＝15). A repeated-measures analysis of variance showed statistically significant group time interaction for VAS, RMDQ, mSchober test and FTF distance (p<0.05). The treatment group showed significant improvement in pain intensity and functional disability as compared to the sham group. Conclusion : Contrast therapy may be an effective and safe treatment for chronic low back pain.

• Journal of Haehwa Medicine
• /
• v.8 no.2
• /
• pp.289-298
• /
• 2000

The result were obtained as follow: 1. Bladder Meridian has been used most frequently and next to Kidney Meridian has been used many time at the rate of acupuncture points. 2. Bladder Meridian has been used most frequently and next to Stomach Meridian, Kidney Meridian, Conception vessel have been used many time at the rate of frequency of used acupuncture points. 3. The acupuncture points at Lower extremity has been used most frequently and next to the point at back, chest and abdomen, upper extremity, head have been used many time. 4. The point of Ji Gu has been used most frequently and next to Dae Jang Su, Jock Sam Li, Cheon Chu, Jo Hae have been used many time. 5. In herb-medication, Seung Gi Tang has been used most frequently and next to Bi Yack Hwan, Ma In Hwan have been used many time.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.91-103
• /
• 2015

This paper investigates control algorithms for a doubly fed induction generator with a back-to-back three-level neutral-point clamped voltage source converter in a medium-voltage wind power system under unbalanced grid conditions. Negative sequence control algorithms to compensate for unbalanced conditions have been investigated with respect to four performance factors: fault ride-through capability, instantaneous active power pulsation, harmonic distortions, and torque pulsation. The control algorithm having zero amplitude of torque ripple indicates the most cost-effective performance in terms of torque pulsation. The least active power pulsation is produced by a control algorithm that nullifies the oscillating component of the instantaneous stator active and reactive power. A combination of these two control algorithms depending on operating requirements and depth of grid unbalance presents the most optimized performance factors under generalized unbalanced operating conditions, leading to a high-performance DFIG wind turbine system with unbalanced grid adaptive features.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.2
• /
• pp.11-16
• /
• 2011

In computer graphics, shadows play a very important role as a hint of inter-object distance as well as themselves in terms of realism. To represent shadows, some traditional methods such as shadow mapping and shadow volume have been frequently used for the purpose. However, the rendering results are not natural since they assume the point light. On the contrary, an area light can render soft-shadows, but its computation is too burdensome due to integral over the whole light source surface. Many alternatives have been introduced, back-projection of occluder onto the light source to get visibility of light or filtering of shadow boundary by calculating size of penumbra. But they also have problems of light bleeding or ringing effects because of low order approximation, or low performance. In this paper, we describe a method to improve those problems using shadow atlas.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2015

This paper proposes a control algorithm for permanent magnet synchronous generators with a back-to-back three-level neutral-point clamped voltage source converter in a medium-voltage off-shore wind power system under unbalanced grid conditions. Specifically, the proposed control algorithm compensates for unbalanced grid voltage at the PCC (Point of Common Coupling) in a collector bus of an off-shore wind power system. This control algorithm has been formulated based on symmetrical components in positive and negative synchronous rotating reference frames under generalized unbalanced operating conditions. Instantaneous active and reactive power is described in terms of symmetrical components of measured grid input voltages and currents. Negative sequential component of AC input current is injected into the PCC in the proposed control strategy. The amplitude of negative sequential component is calculated to minimize the negative sequential component of grid voltage under the limitation of current capability in a voltage source converter. The proposed control algorithm enables the provision of balanced voltage at the PCC resulting in the high quality generated power from off-shore wind power systems under unbalanced network conditions.

• The Journal of the Korea Contents Association
• /
• v.9 no.9
• /
• pp.243-248
• /
• 2009

Among 74 patients who came to pain clinic to treat their backache, 37 patient were randomly allocated to experimental(finger-pressure therapy)group and another 37 patients were allocated to control(transcutaneous electrical nerve stimulator)group. The extent of backache was compared before and after experiment by ANCOVA test at both groups(p<0.005). The reduction of pain level by visual analogue scale at experimental group was statistically significantly bigger than control group when motion with front flexion(1.92), extension after front flexion(2.22), right flexion(1.23), and left flexion(1.21)(p<0.05).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.786-788
• /
• 2013

Molybdenum (Mo) thin film has high electrical conductivity and has been used for a back contact of CIGS thin film solar cell. Generally, the electrical conductivity and the adhesion between the substrate and the film is greatly affected by sputtering conditions such as sputtering power, working pressure, and substrate temperature. In this study, Mo films were deposited by DC magnetron sputtering technique. The influence of sputtering pressure on the electrical and structural properties of Mo films was investigated by using SEM(scanning electron microscope), XRD(X-ray Diffraction), 4-point probe, Reflectance, Hall measurement.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.900-904
• /
• 1991

In this paper, our study for the recognition of Hand-written Korean characters, Arabic numbers and alphabets by neural netwoks. This System extracts feature of character by using the MESH feature point of handwritten character, Arabic numbers and alphabets. To reduce the input image data, features are extracted from each input images. A MLP(multi-layer perceptron) with one hidden layer was trained with a modified BEP(back error propagation) algorithm. This method extracts feature sets of the characters directly from the scanner and can enhance computation speed without using the special preprocesses such as size normalization, smoothing, and thinning.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.219-222
• /
• 2007

The Full-Off Fitting of Movable Bracket using conventional line have received a dynamic contact impact between contact wire and pantograph of electric rolling stock, so this impact cause a rapid vibration of foreword and back near the supporting point of movable bracket. The Full-Off Fitting on Movable Bracket in conventional line differs from that in high speed line. Now conventional line have required a speed up for new electric locomotive and electric car. In speed-up track and big impact place, the Full-Off Fitting and the dropper often get demage. We have done a study of buffering function to solve that problem in conventional line. We have find a need adopting buffer fitting. It is decrease a dynamic impact between contact wire and pantograph of electric rolling stock.