• Journal of architectural history
• /
• v.12 no.3
• /
• pp.163-179
• /
• 2003

The records of about 60 travel essays of the Hall of Bhaisajyaguru(Healing) Budda which was built in Chung Yang Temple passed down since 1525. The chronological change of that Hall architecture according to each period was traced upon. The building structure of the Hall of Bhaisajyaguru Budda which has a roundabout way, and 6 pillars inside, sometimes each 6 pillars inside and outside is hexagonal, one story building in Japanese colonial period(picture 3-1) or the present(picture 3-3). The panaromic picture of Chung Yang Temple shows no alterations of the layout of buildings(picture 1-1), in which the Hall of $Praj{\tilde{n}}{\bar{a}}$(般若殿), the main building in the center and the Hall of Bhaisajyaguru(Healing) Budda, three story stone pagoda, stone lighthouse in front of it became the central axis. The Hall of Bhaisajyaguru(Healing) Budda remained as it was until Japanese invasions in 1592 and 1597. However, it was greatly damaged by the flood in 1717. It was newly built by Lee Ha Gon's leading in 1717-1732. At that time, the interior design was changed. With Bhaisajyaguru(Healing) Budda, 53 Buddhas and ${\acute{S}}arira$ of Stone stupa which show itself by the flood in 1717 was located in the image of the Mountain of Chunchuk or Cheontae like Yu Jeom Temple. The doors of this Hall are located in the front and back. In the four walls each, two realistic and cubic buddhism pictures were drawn, The color of those picture was partly taken off in 1671 and repainted in 1714. The new building in 1717-1732 regained its colorful appearance. However, the names written beside each Images of Buddha disappeared. The notable remark in these records is that some of these travel essays in 17th-18th centuries was calling this hexagonal hall as the octagonal one. It is very important records because it means that before 1525 the octagonal hall might have existed. Chung Yang Temple was rebuilt between 1976 and 1985 after the destruction in the Korean War. After the records are carefully read, the full scale excavation about this historic site was not done yet. The interesting issue of the existence of octagonal building will be resolved by the full scale excavation.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.123-130
• /
• 2018

Storytelling is a compound of two words, 'story' and 'telling'. While the static aspect of 'story' has been emphasized, the dynamic and specific aspect of telling has been ignored. So, in the argument of 'storytelling', it is necessary to break from talking about 'story' and discuss the matter in terms of 'telling' and 'interaction'. In order to accept this need, the term 'Traditional Storytelling' is coined to engage 'oral-storytelling situation' more actively. When 'storytelling' is expressed by a storyteller, it can be referred to 'traditional storytelling', called 'oral performance'. In fact, the storytelling, which has a long history, originated from oral storytelling such as 'oral narration'. It is natural that our current storytelling isn't the same storytelling of an oral period, but the traditional storytelling casts a few crucial viewpoints to us these days when 'telling' has a significant meaning. In the first place, it is 'reflexivity' that we should note in the form of traditional 'storytelling'. It is a kind of self-reference which means reflecting and looking back at oneself in the form of narration. Through this reflexivity, the storytelling is affected by the site of telling and an aspect of one-off thing very frequently. Another point we need to note is a frame. Through this frame, the traditional storytelling come to hold time and space of narration.

• KIEAE Journal
• /
• v.8 no.6
• /
• pp.3-10
• /
• 2008

Since fire was founded in the world, human races have invented various heating methods. Ondol is traditional heating method in Korea. It is very the important work to trace the history and characteristics of Ondol which originated and was developed in the Korean peninsula. Especially, the study on Ondol will contribute to improving the present heating methods and predicting future ones. In this paper, we shall study through the analysis of documents such as oriental documents, the document of Choseon dynasty, European documents and American documents. In order to discover the origins of Ondol as one of the excellent heating method all over the world, This study aims at identifying the history and characteristics of Ondol in the Korean peninsula, through document analysis. Results of this study are as follows. 1) The first document about Ondol is Sookyongjoo(水經注), Chinese ancient geography book. Contents recorded in the book include the description related to Ondol at Kwankyesa temple which was located at the border land between Gogooryo(ancient Korea) and the northeast of China. 2) Ondol was popular heating method in Gogooryo(ancient Korea) and it was used in not only Gogooryo but also Silla Kingdom and Beakje Kingdom. Thereafter, it was also used widely in Goryo dynasty and Choseon dynasty. Thereby we know that Ondol has been used as a heating method for a long time in the Korean peninsula. 3) Ondol was covered with a floor paper since the beginning of Choseon dynasty. the paper made room clean and impacted on Korean life style. Because the floor was clean and warm, Koreans thus took off shoes and sat on the floor. 4) Ondol was spreaded to Jeju island in Korea before 16th century but wasn't used widely there. The reason was that Ondol was rare high class heating system and the weather was warm in Jeju island. 5) The overspreading of Ondol caused that poor people built roughly Ondol in the last of Choseon dynasty. So, the quality of Ondol gradually became lower and lower. 6) A westerner was impressed by the novelty of Ondol and Frank Lloyd Wright had played an important role to update and spread Ondol widely all over the world. Hailing Ondol as the ideal heating system, Frank Lloyd Wright began incorporating it in his buildings back in the U.S. and even invented a modified ondol system, using hot water running through pipes instead of the hot exhaust through flues.

• Nuclear Engineering and Technology
• /
• v.3 no.3
• /
• pp.148-154
• /
• 1971

Some formulae have been derived for the handy calculation of the formation of radioisotope when a reactor is operated regularly on a usual on-off pattern. In particular, the case of isotope production with the present operation condition of tile Korean reactor, which is in operation for 8.2 hours from Monday to Thursday and is not operated on friday and Sunday but is back in operation on Saturday only for 3.2 hours, is discussed herein with special emphasis. Should there be no secondary nuclear reaction resulting in the transformation of produced nuclide, the formula for the calculation of its activity could be derived as follows: (equation omitted) where A: activity (dps), $\Phi$： neutron flux (n cm$^{-2}$ sec$^{-1}$ ), No : number of atoms before the irradiation, $\sigma$ : activation cross section ($\textrm{cm}^2$), λ : disintegration constant of the radioactiveisotope formed (hr$^{-1}$ ), t : elapsed time of target in the reactor (hr), n : number of elasped days of target in the reactor, m : number of days from the first day of sample irradiation to Friday, s, r, q: number of weekday of Friday, Saturday and Sunday, respectively. Since the above formula consists of many invariables on the whole, the activity of each radioisotope to be produced can he easily and conveniently made available from the chart in advance which is made of the invariable terms calculated.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.1
• /
• pp.61-72
• /
• 2002

This paper is the second part of a series of the research about the Teddy boy style which is to examine various fashion changes in subcultural styles in 1900s. The main concern of this research is to investigate the creation and meaning of the Teddy boy style, how it interacted with the elements of class and generation and how the materials needed by the group constructed and appropriated into the visible systematic cultural form of correspondence. The Teddy Boys are the first recognized members of the British youth culture, which is known as the new Edwardian because of their dress. They had created the concept of the "teenagers," which forms the basis of the sense of a "generation" in the 20th century. The Teds set the style that would be used and modified in the following generations. They adopted the Edwardian style of the upper class, and changed it into their own style by modifying it and adding to it some other elements. The Teddy boys style is a special version of the sartorial appropriation encountered in the sphere of the fashion history. It actually began immediately after the war by the upper class youth far from the working class neighborhood. In the late 1953, the elitist aura surrounding the Edwardian suit was suddenly shattered. Within just a few months, the Edwardian suit became a source of social anxiety and the focus of a symbolic battle. Although the Edwardian look had initially went back to the upper class root, it became a symbol of rootlessness. In appropriation of this image, The Teddy boys were also rejecting the sartorial conformism of the English working class with its modest tradition. In this respect, the Teds effected the ascent or fall of the working class in the area of fashion. The Teds dress was not a merely borrowed fashion, but was a bastard fashion in the form of American trends, the Zoot suit. At this time members of the working class possessed only work dress for the week and waist suits for the Sunday outings. Teds broke this pattern, and developed the working class dandyism of wearing clothes simply to show off. The results were that they succeeded in opening the teen market, and popularizing a working class style for the first time in British history. The Teds became the first British street style with ties music, and remain as an symbol of the rising of a new age of values and styles.f values and styles.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.230-234
• /
• 1999

To improve the crossflow untrafiltration flux, we applied periodic oscillations in transmembrane pressure gradient in order to promote fluid turbulence by inducing repeated compression and relaxation of the cake/gel layer. The oscillatory forms used were square-, sine-, triangle-wave, and pumping interruption. The permeate flux profiles were mathematically simulated and compared with the experimental data. The result showed the periodic pumping interruption most effectively improved the overall flux by up to about 32%. Enough pumping off-time, at least on the order of tens of seconds, was needed to allow the solutes in the layer to diffuse back to the bulk phase. It was better to start the oscillations earlier before the layer was fully established. The square-wave oscillation yielded about 11% increase, which was particularly pronounced in the later part of the filtration. Either the amplitude or the period of the oscillations resulted little influence on flux.actate ester, and lactate ester produced in esterification reaction was distilled simultaneously with hydrolysis reaction into lactic acid. When the yields of lactic acid recovered by batch reactive distillations with various alcohols were compared, the yield of lactic acid was increased as the volatility of lactate ester was increased. In this batch reactive distillation, because the mixtures condensed in partial condensor were flown to reboiler through distillation column, the recovery yield of lactic acid was affected by operation temperature of partial condensor. Hydrolysis reaction into lactic acid in distillation column rarelyoccurred because of short retention time of lactate ester and water. Lactate ester was reacted into lactic acid in reboiler.

• Archives of design research
• /
• v.13 no.4
• /
• pp.233-242
• /
• 2000

The traditional image of hydraulic excavator started to change in two ways since 1990. First, post-heavy equipment's visual image was new waves to traditional image of heavy, strong, and wild. They are the negative aspect that excavators have. Another movement of getting rid of its negative image can be found in late-heavy equipment, which was intended to adapt traditional and positive, but off negative images. In 1990s, the design trend is moving from warm/hard to warm/soft, and KOBELCO can be exceptional example that went even further, gone up to cool-soft image. KOBELCO specially aimed 'post- excavator image' strategy, which has been successful. Image of cabin as a human space changed little bit further than outside image. Each company tried to differentiate the design of cabin focusing on its safety. Following paragraphs show specific trend of image change in form, colour, texture, and the composition. Major visual image change in form tries to follow the image of cars and home appliances which are showing the movement from tough and hard image to soft one. Structural change on local image shows the movement from angular edge to edgeless and the movement of cabin's pillar C placed to back of the equipment with gentle inclination. All of these movements are the result of effort to improve traditional excavator's negative image, that top structure is assembled separately, to positive ones. Today's tendency about its color becomes important to apply two different colour styles. Each style has brightness and tone comparison. As an enormous power convey system, it was in common that its brightness comparison was useful because of the alarm of its damage possibility. However, as its colour control and its design have been emphasized gradually, the tone comparison takes a part in an important role, too. As an example, there is an occasion that these comparisons are compromised simultaneously. In the respect of its image creation, its texture treatments make the tendency of being the same as passenger cars. It is caused from its development of the manufacture techniques of from the fabrication method in small business to the press method in big firm. Further, it is also because of its improvement of painting & coating skills. It may prohibit the reflection effect from solar rays. In the point of view of its visual images, it is recognized the prominent tendency that its composition has been gradually decreased. Lots of windows and the frames tends dark-colour as a whole. It is more preferred to have one colour image, but except KOBELCO and HITACHI. As well, there is another high-tendency to improve its standard treatments, especially for its corner and texture treatments.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.4
• /
• pp.303-311
• /
• 1997

Proliposomal patch of clenbuterol, ${\beta}_2-agonist$ bronchodilator, was prepared and its feasibility as a novel transdermal drug delivery system was examined. Proliposomal granules containing clenbuterol was prepared by a standard method using sorbitol and lecithin with (Rx 2) or without cholesterol (Rx 1). The porous structure of sorbitol in the proliposomes was maintained allowing tree flowability of the granules. Following contact with water, the granules were converted probably to liposomes almost completely within several minutes. It indicates that proliposomes may be hydrated, when they are applied on the skin under occlusive condition in vivo, by the sweat to form liposomes. Clenbuterol release from Rx 1 and Rx 2 proliposomes to pH 7.4 isotonic phospate buffer (PBS) across cellulose membrane (mol. wt. cut-off of 12000-14000) was retarded significantly compared with that from the mixture of clenbuterol powder and blank proliposomes. Interestingly, proliposomes prepared with lecithin and cholesterol (i.e., Rx 2 proliposomes) showed much more retarded release of clenbuterol than proliposomes prepared only with lecithin (i.e.. Rx 1 proliposomes), indicating that clenbuterol release from proliposomes can be controlled by the addition of cholesterol to the proliposomes. Proliposomal patches were prepared using PVC film as an occlusive backing sheet, two sides adhesive tape (urethane, 1.45 mm thickness) as a reservoir for proliposome granules and Millipore MF-membrane (0.45 mm pore size) as a drug release-controlling membrane. Rx 1 or Rx 2 proliposomes containing 4.6 mg of clenbuterol were loaded into the reservoir of the patch. Clenbuterol release from the patches to pH 7.4 PBS was determined using USP paddle (50 rpm)-over-disc release method. Clenbuterol release from the proliposomal patches was much more retarded even than from a matrix type clenbuterol patch (Boehringer Ingelheim ltd). Being consistent with clenbuterol release from the proliposomal granules, the release from the patches was highly dependent on the presence of cholesterol in the proliposomes : Patches containing Rx 2 proliposomes showed several fold slower drug release than patches containing Rx 1 proliposomes. When the patch containing Rx 1 proliposomes was applied on to the back of a hair-removed rat, clenbuterol concentration in the rat blood was maintained during 6-72 hrs. Transdermal absorption of clenbuterol from the patch was accelerated when the patch was prehydrated with 50 ml of pH 7.4 PBS before topical application. Above results indicate that sustained transdermal delivery of clenbuterol is feasible using proliposomal patches if the cholesterol content and pore size of the release rate-controlling membrane of patches, for example, are appropriately controlled.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1141-1149
• /
• 2009

In Bone Mineral Density(BMD) measurements, accuracy and precision must be superior in order to know the small changes in bone mineral density and actual biological changes. Therefore the purpose of this study is to increase the reliability of bone mineral density inspection through appropriate management of image quality from machines and inspectors. For the machine management method, the recommended phantom from each bone mineral density machine manufacturer was used to take 10~25 measurements to determine the standard amount and permitted limit. On each inspection day, measurements were taken everyday or at least three times per week to verify the whether or not change existed in the amount of actual bone mineral density. Also evaluations following Shewhart control chart and CUSUM control chart rules were made for the bone mineral density figures from the phantoms used for measurements. Various forms of management became necessary for machine installation and movement. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. There were two measurement methods followed: patients were either measured twice with 30 measurements or three times with 15 measurements. An important point to make regarding measurements is that after the first inspection and any other inspection following, the patient was required to come off the inspection table completely and then get back on for any further measurements. With a 95% confidence level, the precision error produced from the measurement bone mineral figures produced a precision error of 2.77 times the minimum of the biological bone mineral density change (Least significant change: LSC). In order to assure reliability in inspection, there needs to be good oversight of machine management and measurer for machine operation and inspection error. Accuracy error in machines needs to be reduced to under 1% for scientific development in bone mineral density machines.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.9-16
• /
• 1999

When the conventional IPD (inter-poly-dielctrics) layer with ONO(oxide-nitride-oxide) structure was used in the Flash EEPROM cell, its data retention characteristics were significanfly degraded because the top oxide of the ONO layer was etched off due to the cleaning process used in the gate oxidation process for the peripheral MOSFETs. When the IPD layer with the ONON(oxide-nitride-oxide-nitride) was used there, however, its data retention characteristics were much improved because the top nitride of the ONON layer protected the top oxide from being etched in the cleaning process. For the modelling of the data retention characteristics of the Flash EEPROM cell with the ONON IPD layer, the decrease of the threshold voltage cue to the charge loss during the bake was here given by the empirical relation ${\Delta}V_t\; = \;{\beta}t^me^{-ea/kT}$ and the values of the ${\beta}$=184.7, m=0.224, Ea=0.31 eV were obtained with the experimental measurements. The activation energy of 0.31eV implies that the decrease of the threshold voltage by the back was dur to the movement of the trapped electrons inside the inter-oxide nitride layer. On the other hand, the results of the computer simulation using the model were found to be well consistent with the results of the electrical measurements when the thermal budget of the bake was not high. However, the latter was larger then the former in the case of the high thermal budger, This seems to be due to the leakage current generated by the extraction of the electrons with the bake which were injected into the inter-oxide niride later and were trapped there during the programming, and played the role to prevent the leakage current. To prevent the generation of the leakage current, it is required that the inter-oxide nitride layer and the top oxide layer be made as thin and as thick as possible, respectively.