• Journal of the Korean Society of Food Culture
• /
• v.23 no.5
• /
• pp.616-620
• /
• 2008

The principal objective of this study was to evaluate the quality characteristics of Bokbunja pudding, using various levels of Bokbunja fruit juice (140, 150, and 130 g), Bokbunja Wine (10, 20, and 20 g), gelatin (18, 17, and 16 g) and sugar (250, 200, and 150 g). In order to establish the optimal added amounts, chemical composition, saccharinity, color, texture, and sensory evaluations were conducted, and the results of various cases were analyzed and assessed. The statistical data analyses were conducted using the SPSS program. The saccharinity of the Bokbunja pudding increased with increasing amountsof added sugar. Additionally, as the amount of added Gelatin was increased, the L values (lightness) of the Bokbunja pudding decreased. Conversely, the hardness, gumminess, and chewiness values all decreased with decreasing levels of added gelatin and sugar. The optimal mixing condition for the Bokbunja pudding was determined via sensory evaluation. Sensory characteristics, including flavor, sweetness, texture, and overall acceptability, were highest in the type C product. The chemical composition of the type C product was as follows: moisture 71.47%, carbohydrate 24.70%, crude protein 3.83%, crude fat 0.001%, and crude ash 0.001%. According to our results, the optimum mixing ratio for the most satisfactory sensory characteristics of Bokbunja was as follows: Bokbunja fruit juice 130 g, Bokbunja Wine 20 g, Gelatin 16 g, Sugar 150 g, Bokbunja Flavor 0.3 g, and Water 400 g.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.401-404
• /
• 2015

Demand on free-form buildings is gradually increasing, yet owing to the difficulty of production-installation work, several problems occur in the construction phase upon construction of a building, including the increased cost and construction duration, and reduced constructibility. To solve these problems, a techonology to produce FCP using a CNC(Computerized Numeric Control) machine is developed. The technology is that the information of designed free-form buildings to the CNC machine is transferred, and the transferred information is used for RTM(Rod-Type Mold, the mold shaped by back-up rods) and PCM(Phase Change Material) shaping, and the shaped RTM and PCM have the role of molds to produce FCP. Construction duration and project cost are limited in building sites, so the efficiency of processes like production-installation of FCP for application of the technology is significant. Since it is almost impossible to change the production-installation process at the construction phase when they are established, process should be deliberately decided. Therefore, the purpose of the study is to propose a production-installation simulation model of free-form concrete panels, in aspect of PCM. This paper is establishing the process for production-installation of FCP, estimating time required by each construction type and proposing a time simulation model that changes according to various constraints based on the analyses. With the time simulation model, it will be possible to build a cost model and to review the optimal construction duration and project cost.

• Geomechanics and Engineering
• /
• v.37 no.3
• /
• pp.223-241
• /
• 2024

Evaluating the performance of Tunnel Boring Machines (TBMs) stands as a pivotal juncture in the domain of hard rock mechanized tunneling, essential for achieving both a dependable construction timeline and utilization rate. In this investigation, three advanced artificial neural networks namely, gated recurrent unit (GRU), back propagation neural network (BPNN), and simple recurrent neural network (SRNN) were crafted to prognosticate TBM-rate of penetration (ROP). Drawing from a dataset comprising 1125 data points amassed during the construction of the Alborze Service Tunnel, the study commenced. Initially, five geomechanical parameters were scrutinized for their impact on TBM-ROP efficiency. Subsequent statistical analyses narrowed down the effective parameters to three, including uniaxial compressive strength (UCS), peak slope index (PSI), and Brazilian tensile strength (BTS). Among the methodologies employed, GRU emerged as the most robust model, demonstrating exceptional predictive prowess for TBM-ROP with staggering accuracy metrics on the testing subset (R² = 0.87, NRMSE = 6.76E-04, MAD = 2.85E-05). The proposed models present viable solutions for analogous ground and TBM tunneling scenarios, particularly beneficial in routes predominantly composed of volcanic and sedimentary rock formations. Leveraging forecasted parameters holds the promise of enhancing both machine efficiency and construction safety within TBM tunneling endeavors.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.589-599
• /
• 2014

This study selected optimal sites in Myeongsasimni located in west coast of Korea for stratigraphic research containing extreme climate event during quaternary period by spatio-temporal analyses of changes in sedimentary environment and land use employing 1918 topographic map, 2000 digital terrain map, 1976 and 2012 air photographies. The study area shows no significant changes in topographic characteristics that hilly areas with relatively large variations in elevation are distributed over north and south part of the study area, and sand dues are developed along the coast line. Moreover, flat low lying areas are located at the back side of the sand dues. The movement of surface run off and sediment loads shows two major trends of inland direction flow from back sides of sand dunes and outland direction flow from high terrains inland, and the two flows merge into the stream located in the center of the study area. Two sink with individual area of $0.2km^2$ are observed in Yongjeong-ri and Jaryong-ri which are located in south central part and south part of the study area, respectively. In addition, sea level change simulation reveals that $3.4km^2$ and $3.64km^2$ are inundated with 3 m of sea level rise in 1918 and 2000, respectively, and it would contribute to chase sea level change records preserved in stratigraphy. The inundated areas overlaps well with sink areas where it indicates the low lying areas located in south cental and south part of the study area are identical for sediment accumulation. The areas with minimal human impact on sediment records over last 100 years are $3.51km^2$ distributed over central and south part of the study area with the land use changes of mud and rice field in 1918 to rice field in 2012. The candidate sites of $0.15km^2$ in central part and $0.09km^2$ in south part are identified for preferable locations of geologic record of extreme climate events during quaternary period based on the overlay analysis of optimal sedimentary environment and land use changes.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.389-395
• /
• 2011

This study was conducted to investigate the combined effect of fatty acid synthase (FASN) and Acetyl CoA Carboxylase-${\alpha}$ (ACACA) genes on carcass traits of Korean cattle (Hanwoo). A total of 1,057 commercial Hanwoo cattle provided by the NongHyup Livestock Research Center (NLRC) and Hanwoo Performance Competition (HPC) were used to analyze the effect of four single nucleotide polymorphisms (SNPs) within FASN (g.11280A>G, g.16024A>G, g.16039T>C, and g.17924A>G) and one SNP within ACACA (g.2274G>A) genes. In addition, the effect of genotypic combinations between FASN (g.17924A>G) and ACACA (g.2274G>A) SNPs has been studied with carcass traits. Significant associations were identified between g.17924A>G of FASN and carcass weight and back fat, and between the ACACA gene SNP g.2274G>A and longissimus muscle area with HPC samples. It was also found that both effects of FASN g.17924A>G and ACACA g.2274G>A polymorphisms were consistent in NLRC samples. Combined analyses of both NLRC and HPC samples also revealed the significant associations between the FASN g.17924A>G and carcass weight and back fat and between the ACACA g.2274G>A and back fat, respectively. The effect of the genotypic combination of g.17924A>G within FASN and g.2274G>A within ACACA genes showed that the combination of both GG genotypes of FASN and ACACA SNPs causes higher carcass weight and marbling score. The results of this study indicate that the two SNP markers within the FASN and ACACA genes can be utilized to select superior Hanwoo cows and calves in commercial Hanwoo farms.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.5
• /
• pp.642-655
• /
• 2013

In this study, semi-continuous measurements of $PM_{2.5}$ mass, organic and elemental carbon (OC and EC), black carbon (BC), and ionic species concentrations were made for the period of April 03~13, 2012, at a South Area Supersite at Gwangju. Possible sources causing the high concentrations of major chemical species in $PM_{2.5}$ observed during a haze episode were investigated. The measurement results, along with meteorological parameters, gaseous pollutants data, air mass back trajectory analyses and PSCF (potential source contribution function) results, were used to study the haze episode. Substantial enhancements of OC, EC, BC, $K^+$, $SO{_4}^{2-}$, $NO{_3}{^-}$, $NH{_4}{^+}$, and CO concentrations were closely associated with air masses coming from regions of forest fires in southeastern China, suggesting likely an impact of the forest fires. Also the PSCF maps for EC, OC, $SO{_4}^{2-}$, and $K^+$ demonstrate further that the long-range transport of smoke plumes of forest fires detected over the southeastern China could be a possible source of haze phenomena observed at the site. Another possible source leading to haze formation was likely from photochemistry of precursor gases such as volatile organic compounds, $SO_2$, and $NO_2$, resulting in accumulation of secondary organic aerosol, $SO{_4}^{2-}$ and $NO{_3}{^-}$. Throughout the episode, local wind directions were between 200 and $230^{\circ}C$, where two industrial areas are situated, with moderate wind speeds of 3~5 m/s, resulting in highly elevated concentration of $SO_2$ with a maximum of 15 ppb. The $SO{_4}^{2-}$ peak occurring in the afternoon hours coincided with maximum ambient temperature ($24^{\circ}C$) and ozone concentration (~100 ppb), and were driven by photochemistry of $SO_2$. As a result, the pattern of $SO{_4}^{2-}$ variations in relation to wind direction, $SO_2$ and $O_3$ concentrations, and the strong correlation between $SO_2$ and $SO{_4}^{2-}$ ($R^2=0.76$) suggests that in addition to the impact of smoke plumes from forest fires in the southeastern China, local $SO_2$ emissions were likely an important source of $SO{_4}^{2-}$ leading to haze formation at the site.

• Journal of Digital Convergence
• /
• v.16 no.8
• /
• pp.373-380
• /
• 2018

The purpose of this study was to know the effects of teaching behavior type of expression activity class on flow and competence in elementary school. The subject for this research consisted of elementary students located in Busan were selected as a population. The sampling method was convenience sampling out of non-probability sampling method. A total of 300 questionnaires were distributed and 280 copies were collected back. Out of those returned questionnaires, insincerely replied or double-replied questionnaires were excluded and finally 216 questionnaires were analyzed for this study. Collected data were put to frequency analysis, exploratory factor analysis reliability analysis, correlation analysis, and multiple regression analysis using the SPSS Win Ver. 22.0 program. The results of these analyses are as follows. First, the commanding type, the autocratic type, the democratic type and the reward type which are the subordinate variables of the teaching behavior type, were all found to have significant effects on the flow. Second, the democratic type and the reward type which are the subordinate variables of the teaching behavior type, were found to have significant effects on the competence. But, the commanding type and the autocratic type which are the subordinate variables of the teaching behavior type, were not found to have significant effects on the competence. Third, the flow were found to have significant effects on the competence.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.2 s.30
• /
• pp.155-165
• /
• 1989

The purpose of this study was to investigate on the sleeve form variation according to arm movements for elderly women. This study was experimented using the Plaster gypsum. The subjects who were elderly women were divided into three groups according to Rorher Index. Arm movements were five type ($0^{\circ},\;45^{\circ},\;90^{\circ},\;135^{\circ},\;180^{\circ}$) to each the vertical motion in front and in side. The statistical analyses used in this study were Mean, Standard Deviation, Spearman's correlation coefficients, paired T-test, Kruskal-wallis one-way ANOVA and Duncan's multiple range test. The results were as follows: 1) Increasing the movements, the width of the sleeve increased and the height of the sleeve cap decreased but girth of the sleeve cap was not consistant. 2) When varied the rates of the three aspects of the sleeve, the height of the sleeve cap showed the largest variation rate. 3) There was a negative correlation between the height and the width of the sleeve. On the other hand, there was a positive correlation between the sleeve width and the sleeve girth. 4) There were the vertical motion differences between in front and in side on the three aspects of sleeve. 5) The sleeve width and the sleeve girth were different according to somatotypes but the height of the sleeve cap was not different. 6) According to the variation rates of the body surfaces in length of standard lines, the form of sleeve was changed more in the front than in the back. Maximum variation rate showed in the areas of $D_1-D_3,\;E_1-E_3$ in the horizontal lines and $A-E_2$ in vertical lines. 7) According to the comparative drawing of the heights of sleeve cap and sleeve girth, the sleeve basic pattern $S_1(A.H/4)$ was more suitable for the direction $0^{\circ}\;and\;45^{\circ}$. And the basic pattern S_6(A.H/5)$ was more suitable for the direction $90^{\circ}$, the pattern $S_7(A.H/6)$ suitable for the direction $135^{\circ}$, and the pattern $S_8(A.H/8)$ was more suitable for the direction $180^{\circ}$.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.1
• /
• pp.75-90
• /
• 2003

Ettringite and thaumasite were observed in some concrete. The morphology and occurrence of these minerals were closely examined by performing SEM/EDAX analyses. We also experimentally induced the concrete deterioration using $Na_2SO_4$ solution with application of various environmental conditions. The stability of these minerals and deterioration characteristics under applied experimental conditions were determined. Abundant ettringite formed by“through solution reaction”occurred in many open spaces, and some microscopic ettringite formed by "tophochemical replacement" of calcium aluminate also occurred in cement paste. Severe cracking of cement paste causing premature deterioration was often associated with ettringite location. Under specific condition, ettringite was transformed to thaumasite, tricthloroaluminate, or decomposed. Thaumasite occurred with association of ettrinsite in concrete containing carbonate aggregate being subject to dedolomitization or in some concrete being subject to carbonation. Thaumasite appears to be formed under the similar condition to the general ettringite forming condition, but it formed solid solution with ettringite by substituting pre-existing ettringite. Ettringite can also be transformed to trichloroaluminate in the presence of abundant chlorides, but trichloroaluminate changed back to ettringite in late sulfate attack. It is considered that the substitution reaction direction solely depend on the concentration of chloride and sulfate ion.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.157-168
• /
• 2009

The random utility theory and the multinomial logit model (including a more recent variant--the mixed multinomial logit) derived from it have constituted a back bone for theoretical and empirical analyses of various travel demand features including mode choice. In their empirical applications, however, it is customary to specify random utilities which are linear in modal attributes such as time and cost, and in socio-economic variables. The linearity helps easy derivation of important information such as value of travel time savings by calculating marginal rate of substitution between time and cost. In this paper the author focuses on the very linearity of the random utilities. Taking into account the fact that the mode chooser is also labour supplier, commodity consumer as well as leisure-seeker, the author sets up a maximization model of the traveller, which encompasses various economic activities of the traveller. The author derive from the model the indifference curve defined on the space of modal attributes, time and cost and investigate under what conditions the random utility of the traveller becomes linear. It turns out that there exist the conditions under which the random utility is really linear in modal attributes, but the property does not hold when the traveller has a corner solution on the space of modal attributes, or when the primary utility function of the traveller is directly affected by labour provided and/or the travel time itself. As a corollary of the analysis, a random utility is suggested, approximated up to the second order of the variables involved for empirical studies of the field.