• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2020

This study is about the safe arm posture in case of emergency escape using the vertical dive rescue sack at the fire site. The experimental results are as follows. First, the arms extended upward contact with the endothelium and narrowing part of the rescue sack minimized the scratches did not occur. Second, the bent position with both arms open was subject to light abrasions of on the elbows due to friction between the elbows and the scapula and the endothelium. Third, in the posture where both arms were gathered in the chest, the body passed through the narrowing part and friction between the bag's narrowing part, All subjects had light abrasions on their elbows. Fourth, because the arms are lowered, the legs are extended to the width of the shoulders when descending, so that the back of the hand has friction with the narrowing part of the bag and the endothelial skin. Finally, posture with both arms below the front increased the volume of the front of the body, resulting in a slight back injury. As a future research task, it is necessary to study the proper posture of legs and the posture of landing on the ground.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.1 s.160
• /
• pp.119-130
• /
• 2007

The objects of this study were to investigate responses and peculiarity during local cooling by parts of the human body and to show permissible safety limits without injurious to his health because of excessive cooling when he works hot environments. It were measured rectal temperature, skin temperature, heart rate, total body weight loss, local sweat in back and thigh, clothing microclimate and subjective sensation on 8 subjects and cooling parts were head, neck, chest, abdomen, back, waist, hip, upper arm, forearm, hand, thigh, calf and foot. According to above-mentioned the first experiment, we chose permissible safety limits by parts of the human body for one hour. In the second experiment, it was showed permissible safety limits by parts which examined their safety about health through 4 hours cooling test on 3 subjects. The results are as follows: 1. As a result of the first experiment, we chose permissible safety limits by parts, as follows, head $25^{\circ}C$, neck $20^{\circ}C$, chest $27^{\circ}C$, abdomen $25^{\circ}C$, back $20^{\circ}C$, waist $20^{\circ}C$, upper arm $20^{\circ}C$, forearm $20^{\circ}C$, hand $23^{\circ}C$, thigh $20^{\circ}C$, calf $20^{\circ}C$ and foot $23^{\circ}C$ in $37^{\circ}C$, 50%R.H. environment for 1 hour. 2. As a result of the second experiment, cooling on these safety limits temperatures except chest didn't have a bad effect on health. So it was proved that right permissible safety limits of chest was $28^{\circ}C$. From these results, it has been suggested that skin temperature didn't fall below permissible safety limits when human body was to be cool by parts.

• PNF and Movement
• /
• v.21 no.2
• /
• pp.243-253
• /
• 2023

Purpose: This study aimed to investigate the effects of an abdominal drawing-in maneuver (ADIM) with a light load while sitting on transverse abdominis contraction in subjects with and without low back pain. Methods: In this study, 20 participants with chronic low back pain and 20 controls participated. Ultrasonography was used to assess the thickness of the external oblique (EO), internal oblique (IO), and transversus abdominis (TrA) muscles. Muscle thickness was measured at rest and during ADIM in three different sitting postures: (1) just sitting, (2) sitting loaded position (holding a 1 or 2 kg dumbbell in each hand), and (3) sitting loaded shoulder flexion position (holding a 1 or 2 kg dumbbell in each hand). Results: The contraction ratio (CR) and preferential activation ratio (PAR) of the TrA during ADIM had no significant interactional effect between the group and the sitting postures. However, the CR and PRA of the TrA during the ADIM showed significant differences among the three different sitting postures. The CR of the TrA during the ADIM in the sitting loaded shoulder flexion position was significantly increased compared to that in the sitting position (p<0.05). Moreover, the PRA of the TrA muscle during ADIM in sitting loaded and sitting loaded shoulder flexion positions was significantly higher than that in the sitting position (p<0.05). Conclusion: The findings suggest that ADIM in the sitting-loaded shoulder flexion position should be implemented to facilitate TrA activity.

• The Journal of Korean Physical Therapy
• /
• v.31 no.5
• /
• pp.304-310
• /
• 2019

Purpose: This study examined the work-related musculoskeletal pain and quality of life of hospital workers. Methods: Self-reported questionnaires were sent to 350 hospital workers at Seoul and Gyeonggi-do, of which 341 were returned. The questionnaire had four items that covered the demographic information, areas of musculoskeletal problems, pain rating scale, and quality of life. The analysis was completed using descriptive statistic, and the differences between pain and demographic variables were identified using a chi-square test. The differences between the type of occupation and quality of life were analyzed by one-way analysis of variance and a Kruskal-Wallis test. Results: The 12-month prevalence of work-related musculoskeletal pain was 86.1% of physical therapists, 86.5% of occupational therapists, 77.1% of dental hygienists, and 75.8% of nurses. A significant difference in the general and work related variables was observed between the subject with a physical burden and type of occupation. The most affected pain sites of the physical therapist included low back, hand and wrist, shoulder, and neck. The occupational therapists included the hand and wrist, shoulder, neck, but the nurses and dental hygienists reported the shoulder, back, hand and wrist. A significant difference in the quality of life was noted between the subjects in physical therapists and dental hygienists and the subjects in the nurses and occupational therapists (p=0.00). Conclusion: These findings show that hospital workers appear to be high risk for work-related musculoskeletal pain, and the quality of life of physical therapists and nurses was higher than that of dental hygienists and occupational therapists.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.1
• /
• pp.32-35
• /
• 2015

Objective : The purpose of this study was to analyze the relationship between fracture pattern and the development of acute radiculopathy after osteoporotic lumbar compression fracture. Methods : This study included 59 patients who underwent bone cement augmentation for osteoporotic compression fracture below the L2 level, which can lead to radiculopathic radiating pain. The patients were divided into two groups according to the presence of radiculopathy (group A : back pain only; group B : back pain with newly developed radiating pain). We categorized compression fractures into three types by the position of the fracture line. The incidence of newly developed radiculopathy was examined retrospectively for each compression fracture type. Results : The overall incidence of newly developed leg pain (group B) was 25%, and the frequency increased with descending spinal levels (L2 : 0%, L3 : 22%, L4 : 43%, and L5 : 63%). The back pain-only group (group A) had mostly superior-type fractures. On the other hand, the back pain with radiculopathy group (group B) had mostly inferior-type fractures. Most patients in group B showed significant relief of leg pain as well as back pain after bone cement augmentation. Conclusion : The incidence of a newly developed, radiating pain after osteoporotic compression fractures increased gradually from the L3 to L5 levels. Most of these fractures were of the inferior type, and the bone cement augmentation procedures seemed to be sufficient for relief of both back and radiating pain.

• The Korean Journal of Community Living Science
• /
• v.21 no.1
• /
• pp.117-124
• /
• 2010

Recently, research on variables associated with hair styles are increasing with the spreading of total coordinated intention in the fields of clothing and cosmetology. In the present study, we focused on examining the skin temperature on the scalp(the vertex, temporal, and occiput), humidity on the occiput, skin temperatures (the forehead, back of ear, back of neck, upper back, abdomen, forearm, hand, thigh, calf, and foot), rectal temperature, total body mass loss by hair styles in a thermal neutral environment. Four young females participated as subjects. For a certain period, each subject had the five different hair styles in a random order: (1)Straight short hair(SS), (2)Perm waved short hair(PS), (3) Straight long hair(SL), (4)Perm waved long hair(PL), (5)Ponytail style(PT). Subjects wore briefs, bra, shirts with long sleeves, long legged training pants, and socks. The environmental variables of a climatic chamber were kept constant at $21{\pm}0.5^{\circ}C$ of air temperature and 55${\pm}$5%RH of air humidity. The results indicated the following: The skin temperature and humidity on the scalp did not show any significant differences among five different hair styles, but straight long hair style(SL)was the highest on the vertex, temporal, and occiput. The temporal skin temperature($29.8\sim30.8^{\circ}C$) was the highest, while the vertex skin temperature($28.7\sim30.1^{\circ}C$) was the lowest. Humidity on the occiput was the highest in the perm waved long hair style(PL). The back of ear skin temperature was significantly lower in the ponytail style(PT) than in the other four hair styles(p<.001). In the straight long hair style(SL), the skin temperature on the back of the neck and on the upper back were significantly higher than those of the other four hair styles(p<.01). Mean skin temperature and rectal temperature had no significant differences among hair styles. Total body mass was the highest in the perm waved long hair style(PL)(p<.05). We acquired fundamental data to enable the improvement of the current hair clinic system, wigs, functional hats, and helmets.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.77-90
• /
• 2015

This study is to designed to provide foundation for knit design which can apply the thickness and flexibility of jacquard knit by analyzing and comparing mechanical properties of 7 types of jacquard (normal jacquard, bird's eye jacquard, floating jacquard, tubular jacquard, ladder's back jacquard, blister jacquard, transfer jacquard) widely used in knit design to achieve the results. The sample was projected by using 7 gauge and SES-122S type computer knitting machine house tooth pattern with two colors were applied to 7 types of jacquard using Acrylic/Wool(30%/70%) $2/50.5^{\prime}s{\times}4ply\;yarn$ by Shimaseiki MFG., Ltd computer knitting machine. The mechanical properties of 7 types of jacquard samples were measured using KES-FB (Kawabata Evaluation System for Fabric, Kata Tech Co. Ltd). HV(Hand Value) and THV (Total Hand Value) were calculated by using the formula of KN-402-KT and KN-301-WINTER respectively. The measurements were evaluated by 0-to-5 rating scale. As result, the floating jacquard was found to have excellent drape, making it suitable for express feminine silhouette with its most flexible and smooth touch. On the other hand, bird's eye jacquard is adequate for a suit jacket and coat regarding its excellent volume and flexibility. Blister jacquard and tubular jacquard are thick, heavy and stiff knit and both are suitable for simple box-style design. Ladder's back jacquard, however, is more appropriate for expressing the design of feminine charm and voluminous design. Based on the result of this study, it is supposed to provide basic information for development of knit industry regarding jacquard knit by designing the creative knit wear with high production efficiency.

• The Korean Journal of Pain
• /
• v.31 no.2
• /
• pp.109-115
• /
• 2018

Background: Patients with lumbar disc herniation are treated with physiotherapy/medication and some with surgery. However, even after technically successful surgery some develop a failed back syndrome with persistent pain. Our aim was to evaluate the efficacy of epiduroscopy in patients who suffer chronic low back pain and/or radicular pain with or without surgery and the gender difference in outcome. Methods: A total of 88 patients were included with a mean age of 52 years (27-82), 54 women and 34 men. 66 of them were operated previously and 22 were non-operated. They all had persistent chronic back pain and radicular pain despite of medication and physical rehabilitation. Visual Analog Scale (VAS) for pain and Oswestry Disability Index (ODI) were evaluated preoperatively, after one month, six months and one-year after the epiduroscopy. Results: All patients, and also the subgroups (gender and operated/non-operated) improved significantly in pain (VAS) and disability (ODI) at one month. A significant improvement was also seen at one year. No differences were found between men and woman at the different follow-up times. A slight worsening in VAS and ODI was noticed over time except for the non-operated group. Conclusions: Epiduroscopy helps to improve the back and leg pain due to lumbar disc herniation in the early stage. At one year an improvement still exists, and the non-operated group seems to benefit most of the procedure.

• The Journal of Korean Medicine
• /
• v.16 no.2 s.30
• /
• pp.225-247
• /
• 1995

Using Bi-Digital O-Ring Test which was developed by Ohmura Toshiaki, constiution classification by the vegetables' was Measured by various muscle power measurement meters and the results are as follow: 1. Pinch Gauge (Model:pc5030HPG, Japan) is the gauge to measure finger power between the thumb and the second finger, Grip Strength Dynamometer (Model: T.K.K. 5101, Japan) is to measure the hand power (hand dynamometer), Back Strength Dynamometer (Model: T.K.K. 5102, Japan) is to measure back muscle strength, Vertical jump Meter (Model: T.K.K. 5106, Japan) is to measure the height of jump. The above gauges were and its result found that the radish, potato, carrot and cucumber can influence to muscle strength was not true. 2. When the physical constitution is distinguished by the O-Ring Test method, Taeyangin's rate appeared as average 21% although it was insisted that there will be only 0.03-0.1%. This means that the physical constitution but it appears accidently according to the examinee's emotion about the material such as vegetable etc. as favor or unfavor. 3. It was found that the result of O-Ring Test is the same at any time and at any place was not true. there is no reemergence character. 4. The import of O-Ring Test mehtod to the physical discrimination disregarded that the mental factor influences absolutely to the physical heath in the ideological physi cal constitution medical science. 5. 'O-Ring Test method is a objective judgement method.' is wrong judgement. As you see on the above result, Bi-Digital O-Ring Test set the changeable voluntary muscle as the standard of the judgument, that was first mistake logically, second in spite of leass influence of mental influence by the examiner and examinee than the vegetable discrimination influence, the test disregarded the influence. Third, only grasp of some material on hand can influence to the voluntary muscle was a wrong theory disregarding the physiology. Finally the misunderstaning his subjective view as an objective view in spite of examiner and examinee's strong influence. Therefore such kind of physical descrimination method must be sublated.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1067-1075
• /
• 2006

This paper proposes a advanced representation method of hand motion by cheremes analysis in korean sign language. The proposed method is the representation method which apply to the hand motion used in KSL(Korean Sign Language) to represent rich and united hand motion. Words or sentences in KSL are completed by combination of elements called as Cheremes, that is, a hand movement orientation, a finger shape, a hand position, etc. In this paper, Cheremes composing the KSL is divided and represented by 5 elements: the hand movement orientation(HMO), finger shape(FS), hand orientation(HO), hand position(HP) and number of using hand (HN). Each cheremes is expressed by more various characteristics. For example, The hand movement orientation means orientations which the hand move while the sign language is done and can be expressed by 17orientation components. The finger shape means various shapes which fingers can take and represented by 17 components. The Orientation of hand is expressed by 2 characteristics according to whether we use the palm of the hand or the back. The position of hand means specific regions in body which hand(s) is placed while the sign language is done and divided by 8 regions. Finally, the number of hand means whether use only one hand or both hands and is expressed by 2 characteristics. The proposed method has been tested with KSL words and sentences and the results have shown that they can be expressed completely by the proposed representation method.