• Corrosion Science and Technology
• /
• v.11 no.1
• /
• pp.9-14
• /
• 2012

The formation of the Fe-Al inhibition layer in hot-dip galvanizing is a confusing issue for a long time. This study presents a characterization result on the inhibition layer formed on C-Mn-Cr and C-Mn-Si dual-phase steels after a short time galvanizing. The samples were annealed at $800^{\circ}C$ for 60 s in $N_{2}$-10% $H_{2}$ atmosphere with a dew point of $-30^{\circ}C$, and were then galvanized in a bath containing 0.2 %Al. X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) was employed for characterization. The TEM electron diffraction shows that only $Fe_{2}Al_{5}$ intermetallic phase was formed. No orientation relationship between the $Fe_{2}Al_{5}$ phase and the steel substrate could be identified. Two peaks of Al 2p photoelectrons, one from metallic aluminum and the other from $Al^{3+}$ ions, were detected in the inhibition layer, indicating that the layer is in fact a mixture of $Fe_{2}Al_{5}$ and $Al_{2}O_{3}$. TEM/EDS analysis verifies the existence of $Al_{2}O_{3}$ in the boundaries of $Fe_{2}Al_{5}$ grains. The nucleation of $Fe_{2}Al_{5}$ and the reduction of the surface oxide probably proceeded concurrently on galvanizing, and the residual oxides prohibited the heteroepitaxial growth of $Fe_{2}Al_{5}$.

• Microbiology and Biotechnology Letters
• /
• v.19 no.5
• /
• pp.456-463
• /
• 1991

$\beta$-Galactosidase of Bifidobacterium longum KCTC 3215 was studied on the production, purification, and characterization. Optimum conditions for the enzyme production were in the medium of 1.0% lactose as carbon source, initial pH 7.0 and in 17 hours of cultivation at $37^{\circ}C$. The enzyme was purified 9.25 folds by protamine sulfate precipitation, ammonium sulfate fractionation, DEAE-Sephadex A-50 ion exchange chromatography and Sephadex G-150 gel filtration. The maximal P-galactosidase activity was observed at pH 6.5 and at the temperature of $40^{\circ}C$ This enzyme was stable at pH 6.0-8.5. Metal ions such as $Ca^{2+} \;and \; Co^{2+}$, 2-mercaptoethanol, cysteine, and glutathione stimulated B-galactosidase activity. The enzyme activity was inhibited by addition of $Mg^{2+}, Fe^{2+}, Cs^{1+}, Li^{1+}$, DETA, galactose, and $\rho$-chloromercuribenzoic acid. The kinetics of o-nitrophenyl-$\beta$-D-galactopyranoside and lactose were $K_m$ = 1.66 mM, $V_{max}= 0.30 mM/min\cdot mg\cdot protein$ and $KK_m = 3.18 mM, \; V_{max}= 0.42 mM/min \cdot mg\cdot$ protein, respectively. The molecular weight of native enzyme was about 360, 000 dalton and the enzyme consisted of 2 identical subunits with a molecular weight of 180, 000.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.251-259
• /
• 2013

An endoxylanase gene (PoxynA) that belongs to the glycoside hydrolase (GH) family 11 was cloned from a xylanolytic strain, Penicillium oxalicum B3-11(2). PoxynA was overexpressed in Trichoderma reesei QM9414 by using a constitutive strong promoter of the encoding pyruvate decarboxylase (pdc). The high extracellular xylanase activities in the fermentation liquid of the transformants were maintained 29~35-fold higher compared with the wild strain. The recombinant POXYNA was purified to homogeneity, and its characters were analyzed. Its optimal temperature and pH value were $50^{\circ}C$ and 5.0, respectively. The enzyme was stable at a pH range of 2.0 to 7.0. Using beechwood as the substrate, POXYNA had a high specific activity of $1,856{\pm}53.5$ IU/mg. In the presence of metal ions, such as $Cu^{2+}$, and $Mg^{2+}$, the activity of the enzyme increased. However, strong inhibition of the enzyme activity was observed in the presence of $Mn^{2+}$ and $Fe^{2+}$. The recombinant POXYNA hydrolyzed birchwood xylan, beechwood xylan, and oat spelt xylan to produce short-chain xylooligosaccharides, xylopentaose, xylotriose, and xylobiose as the main products. This is the first report on the expression properties of a recombinant endoxylanase gene from Penicillium oxalicum. The properties of this endoxylanase make it promising for applications in the food and feed industries.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.166-170
• /
• 2004

Gluconobacter oxydans that produces the cellulose was isolated. In order to confirm the chemical features of cellulose, various spectrophtometeric analysis were carried out using electron microscopy, X-ray diffractogram, and CP/MAS $\^$13/C NMR. The purified cellulose was found to be identical to that of Acetobacter xylinum. For effective production of cellulose, the various carbon and nitrogen sources, mixture of calcium and magnesium ions, and biotin concentration were investigated in flask cultures. Among the various carbon sources, glucose and sucrose were found to be best for the production of cellulose, with maximum concentration of 2.41 g/L obtained when a mixture of 10 g/L of each glucose and sucrose were used. With regard to the nitrogen sources, when 20 g/L of yeast extract was used, the maximum concentration of bacterial cellulose was reached. The concentration of cellulose was increased with mixture of 2 mM of each Ca$\^$2+/ and Mg$\^$2+/. The optimum biotin concentration for the production of cellulose was in the range of 15 to 20mg/L. At higher biotin concentration (25-35mg/L). the bacterial cellulose production was lower.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1477-1483
• /
• 2004

We present the tandem mass spectrometry applications carried out to elucidate the coordination structure of Zn(II) bound lysine ternary complexes, $(Zn+Lys+Lys-H)^+$, which is a good model system to represent a simple (metallo)enzyme-substrate complex (ES). In particular, experimental efforts were focused on revealing the involvement of a lysine side chain ${\varepsilon}$-amino group in the coordination of $Zn^{2+}$ divalent ions. MS/MS fragmentation pattern showed that all the oxygen species within a complex fell off in the form of $H_2O$ in contrast to those of other ternary complexes containing amino acids with simple side chains (4-coordinate geometries, Figure 1a), suggesting that the lysine complexes have different coordination structures from the others. The participation of a lysine basic side chain in the coordination of Zn(II) was experimentally evidenced in MS/MS for $N{\varepsilon}$-Acetyl-L-Lys Zn(II) complexes with acetyl protection groups as well as in MS/MS for the ternary complexes with one $NH_3$ loss, $(Zn+Lys+Lys-NH_3-H)^+$. Detailed structures were predicted using ab initio calculations on $(Zn+Lys+Lys-H)^+$ isomers with 4-, 5-, and 6-coordinate structures. A zwitterionic 4-coordinate complex (Figure 7d) and a 5-coordinate structure with distorted bipyramidal geometry (Figure 7b) are found to be most plausible in terms of energy stability and compatibility with the experimental observations, respectively.

• Journal of the Korean Magnetics Society
• /
• v.24 no.2
• /
• pp.41-45
• /
• 2014

By M$\ddot{o}$ssbauer spectroscopy and x-ray measurement $(Fe_{0.95}Ni_{0.05})_7Se_8$ has been studied. The crystal structure of $(Fe_{0.95}Ni_{0.05})_7Se_8$ is found to be a triclinic superstructure of the NiAs sturcture while $Fe_7Se_8$ has a orthohexagonal superstructure. Abrupt changes of quadrupole shifts near 125 K for $(Fe_{0.95}Ni_{0.05})_7Se_8$ suggests that the spin-rotation transition proceeds abruptly, in contrast with the gradual transition reported for $Fe_7Se_8$ with a triclinic superstructure. Isomer shifts indicate a ferrous state for the iron ions at all four states.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.46-49
• /
• 2011

A highly sensitive and selective extraction-spectrophotometric method has been developed for determination of trace amounts of cimetidine. This method is based on the extraction of cimetidine as an ion pair with bromothymol blue (BTB) into chloroform and measuring its absorbance at 417 nm. The effect of different variables such as pH, concentration of BTB, volume of chloroform and shaking time was investigated. The effect of interfering ions on the extraction was also studied. The calibration curve was linear in the range of 0.25-8 ${\mu}gmL^{-1}$ with correlation coefficient of 0.9997. The detection limit based on 3Sb was 0.14 ${\mu}gmL^{-1}$ and relative standard deviation for 10 replicated measurements of 1.0 and 4.0 ${\mu}gmL^{-1}$ of cimetidine was 3.2 and 1.49%, respectively. The proposed method was applied to the determination of cimetidine in pharmaceutical samples with good recoveries.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.189-195
• /
• 2002

Using Streptomyces sp. YU100 isolated from Korean soil, the fermentative production of phospholipase D was attempted along with its purification and characterization studies. When different carbon and nitrogen sources were supplemented in the culture medium, glucose and yeast extract were found to be the best. By varying the concentration of nutrients and calcium carbonate, the optimal culture medium was determined as 2.0% glucose, 1.5% yeast extract, 0.5% tryptone 0.3% calcium carbonate. During cultivation, the strain secreted most of the phospholipase D in the early stage of growth within 24 h. The phospholipase D produced in the culture broth exhibited hydrolytic activity as well as transphosphatidylation activity on lecithin (phosphatidylcholine). In particular, the culture broth showed 8.7 units/ml of hydrolytic activity when cultivated at $28^{\circ}C$ for 1.5 days. The phospholipase D was purified using 80% ammonium sulfate precipitation and DEAE-Sepharose CL-6B column chromatography, which produced a major band of 57 kDa on a 10% SDS-polyacrylamide gel with purity higher than 80%. The enzyme showed an optimal pH of 7 in hydrolytic reaction, and at pH 4 in a transphosphatidylation reaction. The enzyme activity increased until the reaction temperature was elevated to $60^{\circ}C$. The enzyme was relatively stable at high temperatures and neutral pH, but significantly unstable in the alkaline range. Among the detergents tested as emulsifiers of phospholipids, the highest enzyme activity was observed when 1.5% Triton X-100 was employed. However, no inhibitory effect by metal ions was detected. Under optimized reaction conditions, the purified enzyme not only completely decomposed PC to phosphatidic acid within 1 h, but also exhibited higher than 80% conversion rate of PC to PS by transphosphatidylation within 4 h.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1465-1474
• /
• 2005

The primary purpose of this study is to investigate the differences in the characteristics of the mordants, synthetic aluminum mordants and ash solutions as natural mordants, used in Caesalpinia sappan dyeing. By introducing aluminum potassium sulfate in the ash solutions, the behavior of the aluminum in the ash solutions were observed. In the rice straw ash solutions, adjusted to the levels of pH6 and pH10, the aluminum potassium sulfate was introduced to achieve various concentration levels. From the analysis of the ash solution of pull, $K^+$ and $Na^+$ ion concentrations were found to be extremely high, while $Al^+$ ion concentration was 0. The color development in the Caesalpinia sappan dyeing by ash solution mordanting was found to be mainly governed not by the mordanting actions of the metallic ions but by those of alkali components. In the case of cotton, the application of pH10 ash solution promoted reddish color development compared to the case of non-mordanting, regardless of the aluminum potassium sulfate addition. In the case of silk, the application of pH10 ash solution increased a* value and decreased b* value compared to the case of non-mordanting.