• Korean Journal of Food Science and Technology
• /
• 제28권4호
• /
• pp.663-667
• /
• 1996

Acid phosphatase (EC 3.1.3.2) from Welsh onion was partially purified by Sephacryl S-200 gel filtration and CM-Sepharose CL-6B ion exchange chromatography. The optimum pH and temperature of acid phosphatase from green onion were pH 5.5 and $60^{\circ}C$, respectively. The enzyme was the most stable at pH 6.0 and unstable above pH 9.0. The activation energy of the enzyme was determined to be 4.86kcal/mole. The enzyme utilized p-nitrophenyl phosphate most as a best substrate among tested possible substrates, while 5'-GMP and 5'-IMP were poor substrates for the enzyme. $K_{m.app.}$ of the enzyme with p-nitrophenyl phosphate as a substrate was identified as 0.87mM. Among metal ions and inhibitors tested, $Cr^{+++},\;Zn^{++},\;Cu^{++}$, molybdate and metavanadate ions inhibited the enzyme reaction drastically.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제27권1호
• /
• pp.8-13
• /
• 2014

As packing density in integrated circuits increases, multilevel metallization process has been widely used. But hillock formed in the bottom layers of aluminum are well known to make interlayer short in multilevel metallization. In this study, the effects of ion implantation to the metal film and deposition temperature on the hillock formation were investigated. The Al-1%Si thin film of $1{\mu}m$ thickness was DC sputtered with substrate ($SiO_2/Si$) temperature of $20^{\circ}C$, $200^{\circ}C$, and $400^{\circ}C$, respectively. Ar ions ($1{\times}10^{15}cm^{-2}$: 150 keV) and B ions ($1{\times}10^{15}cm^{-2}$, 30 keV, 150 keV) were implanted to the Al-Si thin film. The deposited films were evaluated by SEM, surface profiler and resistance measuring system. As a results, Ar implanting to Al-Si film is very effective to reduce hillock size in the metal deposition temperature below than $200^{\circ}C$, and B implanting to an Al-Si film is effective to reduce hillock density in the high temperature deposition conditions around $400^{\circ}C$. Line width less than $3{\mu}m$ was free of hillock after alloying.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제36권8호
• /
• pp.849-855
• /
• 2012

The effect of electric fields on the response of diffusion flames in a counterflow has been investigated experimentally by varying the AC voltage and frequency. The result showed that the flame was stationary with high AC frequency above the threshold frequency, and it increased with the applied voltage and then leveled off at 35 Hz. Below the threshold frequency, however, the flame oscillated with a frequency that was synchronized with the applied AC frequency. This oscillation can be attributed to the ionic wind effect due to the generation of bulk flow, which arises from the momentum transfer by molecular collisions between neutral molecules and ions, where the ions in the reaction zone were accelerated by the Lorentz force.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제20권5호
• /
• pp.66-74
• /
• 2016

The objective of this study is the investigation of the influence of carbonation on the penetration of chloride ions in reinforced concrete sections for different mix proportions and environmental conditions. A comprehensive numerical model based on the change of the pore structure and the chemical equilibrium was used for this combined action of carbonation and chloride ingress. The empirical formulae of some parameters in this model are estimated according to numerous experimental data. And, a set of data analysis is carried out to simplify the estimation of model variables to reduce the computational cost. A coupled simulation of the transports of carbon dioxide, chloride ions, heat and moisture is carried out. Then, the parametric analysis is given and the numerical results show that the effect of carbonation of the free chloride ingress is significant and depends on the binder types and concrete mix proportion.

• Journal of Life Science
• /
• 제11권5호
• /
• pp.457-463
• /
• 2001

A bacterial strain SC-22 which produced alkaline lipase was isolated from salf-fermented shrimps. Strains SC-22 was identified as Staphylococcus xylosus. An alkaline lipase excreted by Staphylococcus xylosus SC-22 was purified by ammonium sulfate predipitation and column chromatography on Sephadex G-100 and DEAE-Sephace. The specific activity of purified lipase was 756U/mg of protein with 17.2% yield. The approximate molecular weight of the purified enzyme was 47 kDa. The partially purified lipase preparation had and optimum temperature of 4$0^{\circ}C$, an optimum pH of 8.0, and a stable of 5~10. Lipase activities were enhanced by salt ions such as $Ca^{2+}$, $Mg^{2+}$,N $a^{2+}$ while inhibited remarkably by heavy metal ions, C $u^{2+}$ and P $b^{2+}$.EX> 2+/.

• Journal of the Korean Magnetics Society
• /
• 제15권2호
• /
• pp.109-112
• /
• 2005

Electronic and magnetic properties of $Ti_{1-x}M_xO_{2-\delta}$ (M=Co and Fe) thin films grown by sol-gel method have been investigated. Anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films were successfully grown on $Al_2O_3$ (0001) substrates and exhibited p-type electrical conductivity while the undoped films n-type conductivity. Room temperature vibrating sample magnetometry measurements on the anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films with same x ($=4.8 at.{\%}$) showed quite similar magnetic hysteresis curves with the saturation magnetic moment of $\~4 {\mu}_B$ per Co ion despite their differences in structural and electronic properties. Such giant magnetic moment is attributable to the unquenched orbital moment of the $Co^{2+}$ ions substituting the octahedral $Ti^{4+}$ sites. Similar ferromagnetic behavior was observed for $Ti_{1-x}Fe_xO_{2-\delta}$ films that are highly resistive compared to the Co doped samples. Saturation magnetic moment was found to decrease for higher x, i.e., $\~2$ and $\~1.5 {\mu}_B$ per Fe ion for x=2.4 and 5.8 at. $\%$, respectively. Conversion electron $M\ddot{o}ssbauer$ spectroscopy measurements predicted the coexistence of $Fe^{2+}$ and $Fe^{3+}$ ions at the octahedral sites of $Ti_{1-x}Fe_xO_{2-\delta}$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제34권3호
• /
• pp.245-250
• /
• 2010

The procedure for estimating the gas (rotational) temperature of an air discharge in supersonic flows is presented in detail. Since direct measurement of the temperature in a supersonic flow is difficult, a nonintrusive measurement was performed by optical emission spectroscopy based on the emission spectra of nitrogen molecular ions. A detailed explanation, including the equations for emission line intensity, is presented in order to understand the structure of the emission spectra of nitrogen molecular ions. Using the obtained representation for emission spectrum, a synthetic spectrum of the first negative system of $N_2^+$ is obtained, and it is compared with the experimentally measured spectrum. Within a relative error of approximately 6.8% for the overall band spectra, the synthetic and measured spectra agree well. In the case of a 25-mA DC air discharge in a supersonic (Mach 3) flow, the gas temperature profile shows an approximately linear variation and a peak temperature of approximately 350 K.

• Journal of the Korean Magnetics Society
• /
• 제8권4호
• /
• pp.192-197
• /
• 1998

The Mossbauer spectra of the $Ni_{1-x}Cd_xFeAlO_4$ system were investigated with the Cd content x at room temperature. The spectra of the samples exhibit various patterns as follows 1) superparmagnetic relaxation for 0$\leq$x$\leq$0.2, 2) ferrimagnetic sextet for 0.3$\leq$x$\leq$0.5, 3) ferromagnetic relaxation for x=0.6, 0.7, 4) paramagnetic doublet for 0.8$\leq$x$\leq$1, with the Cd content x. In the samples with x values from 0 to 0.2, the substituted $Cd^{2+}$ ions transfer the $Al^{3+}$ ions from A-site to B-site mainly. The superparamagnetic relaxation effect and the ferromagnetic relaxation effect are derived from the $Al^{3+}$, $Cd^{2+}$ respectively. The magnetic structure of the $Ni_{1-x}Cd_xFeAlO_4$ system was explained by the Yafet-Kittel model.

• Journal of Microbiology and Biotechnology
• /
• 제12권2호
• /
• pp.296-300
• /
• 2002

Bacterial cell surface components are the major factors responsible for pathogenesis and bioremediation. In particular, the surface of a Gram-negative bacterium cell has a variety of components compared to that of a Gram-positive cell. In our previous study, we isolated an isogenic mutant of Bradyrhizobium japonicum, which exhibited altered cell surface characteristics, including an increased hydrophobicity. Polyacrylamide gel electrophoretic analysis of the lipopolysaccharide (LPS) in the mutant demonstrated that the O-polysaccharide part was completely absent. Meanwhile, a gel permeation chromatographic analysis of the exopolysaccharide (EPS) in the mutant demonstrated that it was unaltered. Since LPSs are known to have several anion groups that interact with various cation groups and metal ions, the mutant provided an opportunity to examine the direct role of LPS in metal binding by B. japonicum. Using atomic absorption spectrophotometry, it was clearly demonstrated that LPS was involved in metal binding. The binding capacity of the LPS mutant to various metal ions $(Cd^{2+},\;Cu^{2+},\;Pb^{2+},\;and\;Zn^{2+})$ was 50-70% lower than that of the wild-type strain. Also, through an EPS analysis and desorption experiment, it was found that EPS and centrifugal force had no effect on the metal binding. Accordingly, it would appear that LPS molecules on B. japonicum effect the properties, which precipitate more distinctly metal-rich mineral phase.

• Transactions on Electrical and Electronic Materials
• /
• 제9권6호
• /
• pp.231-236
• /
• 2008

B, P, and Cs ions were implanted with various parameters into silicon nitride layers prepared by LPCVD. In order to get the maximum impurity concentration at the silicon nitride surface, a high temperature oxide (HTO) buffer layers was deposited prior to the implantation. Alkali ion and pH sensing properties of the layers were investigated with an electrolyte-insulator-silicon (EIS) structure using high frequency capacitance-voltage (HF-CV) measurements. The ion sensing properties of implanted silicon nitrides were compared to those of as-deposited silicon nitride. Band Cs co-implanted silicon nitrides showed a pronounced difference in pH and alkali ion sensing properties compared to those of as-deposited silicon nitride. B or P implanted silicon nitrides in contrast showed similar ion sensitivities like those of as-deposited silicon nitride.